This all‑in‑one water butt kit is designed to upgrade or install a 3/4" rainwater harvesting setup. It combines a ¾" BSP water butt connector, an in‑line valve, a MDPE straight joiner (20mm to ¾" BSP) and a 27mm drill bit for straightforward installation.

  • 1 x ¾” BSP Water Butt Connector (BUTT34BSPM-F) with a female BSP outlet
  • 1 x ¾” BSP In‑Line Valve (HCV34BSPM001BLACK) with ¾" BSPM inlet and outlet
  • 1 x MDPE Straight Joiner 20mm – ¾” BSPF (MDPESTR20-34BSPF)
  • 1 x 27mm HSS Drill Bit Hole Saw Cutter (DB27MM)

The water butt connector is designed to screw into existing female threads on your container or, if no thread exists, to be fixed directly through a drilled hole. When used through a hole, remove the back nut and one washer, insert the connector, and secure from inside and outside with the washers and nut to create a leak‑proof seal. Constructed from durable plastic, it resists outdoor wear while remaining lightweight for quick on‑site fitting.

The inline valve provides precise flow control with a smooth “soft touch” action, reducing hand effort and helping prevent accidental leaks when closing. Its plastic construction offers corrosion resistance and long‑term reliability in garden or light commercial environments. The valve seals securely when shut, maintaining the integrity of your rainwater system.

The MDPE straight joiner enables a straightforward connection between 20mm MDPE supply lines and a ¾" BSP fitting, simplifying upgrades from older pipework or incompatible components. The included 27mm drill bit is suitable for creating a clean bore in the water butt or barrel as needed, allowing flexible installation options for different container sizes.

Ideal for homeowners, property managers and tradespeople looking to upgrade existing rainwater harvesting or to install a new system with a reliable, leak‑proof connection. This kit reduces the need to source individual components separately and supports quick, practical setup for garden irrigation, allotments, or site water collection projects.

Akor
MDPE Pipe Fittings

This all‑in‑one water butt kit is designed to upgrade or install a 3/4" rainwater harvesting setup. It combines a ¾" BSP water butt connector, an in‑line valve, a MDPE straight joiner (20mm to ¾" BSP) and a 27mm drill bit for straightforward installation.

  • 1 x ¾” BSP Water Butt Connector (BUTT34BSPM-F) with a female BSP outlet
  • 1 x ¾” BSP In‑Line Valve (HCV34BSPM001BLACK) with ¾" BSPM inlet and outlet
  • 1 x MDPE Straight Joiner 20mm – ¾” BSPF (MDPESTR20-34BSPF)
  • 1 x 27mm HSS Drill Bit Hole Saw Cutter (DB27MM)

The water butt connector is designed to screw into existing female threads on your container or, if no thread exists, to be fixed directly through a drilled hole. When used through a hole, remove the back nut and one washer, insert the connector, and secure from inside and outside with the washers and nut to create a leak‑proof seal. Constructed from durable plastic, it resists outdoor wear while remaining lightweight for quick on‑site fitting.

The inline valve provides precise flow control with a smooth “soft touch” action, reducing hand effort and helping prevent accidental leaks when closing. Its plastic construction offers corrosion resistance and long‑term reliability in garden or light commercial environments. The valve seals securely when shut, maintaining the integrity of your rainwater system.

The MDPE straight joiner enables a straightforward connection between 20mm MDPE supply lines and a ¾" BSP fitting, simplifying upgrades from older pipework or incompatible components. The included 27mm drill bit is suitable for creating a clean bore in the water butt or barrel as needed, allowing flexible installation options for different container sizes.

Ideal for homeowners, property managers and tradespeople looking to upgrade existing rainwater harvesting or to install a new system with a reliable, leak‑proof connection. This kit reduces the need to source individual components separately and supports quick, practical setup for garden irrigation, allotments, or site water collection projects.

Akor
MDPE Pipe Fittings
Ex VAT Inc VAT
CALL US ON
01625 322269
Call us on 01625 322269
Trustpilot
1 7
£8.00
Akor

Water Butt Kit 3/4" with In-Line Valve + 25mm MDPE Joiner and Drill Bit
Trustpilot

We're here to help Monday to Friday 8:00 - 5:00

Live Chat or call us on 01625 322269

Delivery

Delivery charges will vary depending on your location.

To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode

We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.

This all‑in‑one water butt kit is designed to upgrade or install a 3/4" rainwater harvesting setup. It combines a ¾" BSP water butt connector, an in‑line valve, a MDPE straight joiner (20mm to ¾" BSP) and a 27mm drill bit for straightforward installation.

  • 1 x ¾” BSP Water Butt Connector (BUTT34BSPM-F) with a female BSP outlet
  • 1 x ¾” BSP In‑Line Valve (HCV34BSPM001BLACK) with ¾" BSPM inlet and outlet
  • 1 x MDPE Straight Joiner 20mm – ¾” BSPF (MDPESTR20-34BSPF)
  • 1 x 27mm HSS Drill Bit Hole Saw Cutter (DB27MM)

The water butt connector is designed to screw into existing female threads on your container or, if no thread exists, to be fixed directly through a drilled hole. When used through a hole, remove the back nut and one washer, insert the connector, and secure from inside and outside with the washers and nut to create a leak‑proof seal. Constructed from durable plastic, it resists outdoor wear while remaining lightweight for quick on‑site fitting.

The inline valve provides precise flow control with a smooth “soft touch” action, reducing hand effort and helping prevent accidental leaks when closing. Its plastic construction offers corrosion resistance and long‑term reliability in garden or light commercial environments. The valve seals securely when shut, maintaining the integrity of your rainwater system.

The MDPE straight joiner enables a straightforward connection between 20mm MDPE supply lines and a ¾" BSP fitting, simplifying upgrades from older pipework or incompatible components. The included 27mm drill bit is suitable for creating a clean bore in the water butt or barrel as needed, allowing flexible installation options for different container sizes.

Ideal for homeowners, property managers and tradespeople looking to upgrade existing rainwater harvesting or to install a new system with a reliable, leak‑proof connection. This kit reduces the need to source individual components separately and supports quick, practical setup for garden irrigation, allotments, or site water collection projects.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Have a question?

If you have any questions about our products or would like to learn more about our shipping options please feel free to contact one of our team today.

Contact Us
Water Butt Kit 3/4" with In-Line Valve + 25mm MDPE Joiner and Drill Bit - Armstrong Cheshire
Akor

Water Butt Kit 3/4" with In-Line Valve + 25mm MDPE Joiner and Drill Bit

£8.00

This all‑in‑one water butt kit is designed to upgrade or install a 3/4" rainwater harvesting setup. It combines a ¾" BSP water butt connector, an in‑line valve, a MDPE straight joiner (20mm to ¾" BSP) and a 27mm drill bit for straightforward installation.

  • 1 x ¾” BSP Water Butt Connector (BUTT34BSPM-F) with a female BSP outlet
  • 1 x ¾” BSP In‑Line Valve (HCV34BSPM001BLACK) with ¾" BSPM inlet and outlet
  • 1 x MDPE Straight Joiner 20mm – ¾” BSPF (MDPESTR20-34BSPF)
  • 1 x 27mm HSS Drill Bit Hole Saw Cutter (DB27MM)

The water butt connector is designed to screw into existing female threads on your container or, if no thread exists, to be fixed directly through a drilled hole. When used through a hole, remove the back nut and one washer, insert the connector, and secure from inside and outside with the washers and nut to create a leak‑proof seal. Constructed from durable plastic, it resists outdoor wear while remaining lightweight for quick on‑site fitting.

The inline valve provides precise flow control with a smooth “soft touch” action, reducing hand effort and helping prevent accidental leaks when closing. Its plastic construction offers corrosion resistance and long‑term reliability in garden or light commercial environments. The valve seals securely when shut, maintaining the integrity of your rainwater system.

The MDPE straight joiner enables a straightforward connection between 20mm MDPE supply lines and a ¾" BSP fitting, simplifying upgrades from older pipework or incompatible components. The included 27mm drill bit is suitable for creating a clean bore in the water butt or barrel as needed, allowing flexible installation options for different container sizes.

Ideal for homeowners, property managers and tradespeople looking to upgrade existing rainwater harvesting or to install a new system with a reliable, leak‑proof connection. This kit reduces the need to source individual components separately and supports quick, practical setup for garden irrigation, allotments, or site water collection projects.

View product