This Water Butt Brass Kit 1" BSP Male to 3/4" BSP Female is a durable, adaptable fitting for rainwater harvesting and fluid storage systems. Built in brass, it’s designed to withstand outdoor conditions and provide a reliable seal over time.

  • 1 x Water Butt Brass 1" BSP Male - 3/4" BSP Female (WB-BR-34BSPF-1BSPM)
  • 1 x PTFE Tape Roll
  • 1 x MDPE Straight Joiner 20mm – ¾” BSP (MDPESTR20-34BSPF)
  • 1 x In-Line Valve ¾” BSP (HCV34BSPM001BLACK)

The 1" BSP male to 3/4" BSP female outlet enables practical adaptation between differing pipe sizes in water butts or containers, making it a versatile choice for upgrading existing installations or adding a new rainwater setup. Brass construction provides longevity in exposed environments, while the included PTFE tape helps achieve a tight seal on threaded connections.

Key features

  • Durable brass body for outdoor resilience and long-term performance
  • Reduces 1" BSP male to 3/4" BSP female, enabling compatibility across common fittings
  • MDPE Straight Joiner 20mm – ¾” BSP to connect 20mm MDPE pipe to the 3/4" BSP thread
  • In-Line valve, ¾” BSPM, with soft-touch operation for precise flow control
  • Plastic inline valve body resists corrosion and build-up, aiding maintenance

Installation notes

  • If your container already has a female thread, screw the 1" BSP male connector directly into place for a seamless fit.
  • If there is no existing thread, create a suitable hole and secure using washers and a back nut, then tighten to form a leak-free seal.
  • For full control of water flow, use the inline valve to regulate discharge and minimise splashes or spills.
  • Ensure the 33mm hole (for the 1" BSP male thread) is clean and square to maintain a solid seal.

Ideal for tradespeople installing or upgrading rainwater systems, this kit combines reliability with practical adaptability, helping you tailor water storage setups to a range of barrels and containers.

Akor
MDPE Pipe Fittings

This Water Butt Brass Kit 1" BSP Male to 3/4" BSP Female is a durable, adaptable fitting for rainwater harvesting and fluid storage systems. Built in brass, it’s designed to withstand outdoor conditions and provide a reliable seal over time.

  • 1 x Water Butt Brass 1" BSP Male - 3/4" BSP Female (WB-BR-34BSPF-1BSPM)
  • 1 x PTFE Tape Roll
  • 1 x MDPE Straight Joiner 20mm – ¾” BSP (MDPESTR20-34BSPF)
  • 1 x In-Line Valve ¾” BSP (HCV34BSPM001BLACK)

The 1" BSP male to 3/4" BSP female outlet enables practical adaptation between differing pipe sizes in water butts or containers, making it a versatile choice for upgrading existing installations or adding a new rainwater setup. Brass construction provides longevity in exposed environments, while the included PTFE tape helps achieve a tight seal on threaded connections.

Key features

  • Durable brass body for outdoor resilience and long-term performance
  • Reduces 1" BSP male to 3/4" BSP female, enabling compatibility across common fittings
  • MDPE Straight Joiner 20mm – ¾” BSP to connect 20mm MDPE pipe to the 3/4" BSP thread
  • In-Line valve, ¾” BSPM, with soft-touch operation for precise flow control
  • Plastic inline valve body resists corrosion and build-up, aiding maintenance

Installation notes

  • If your container already has a female thread, screw the 1" BSP male connector directly into place for a seamless fit.
  • If there is no existing thread, create a suitable hole and secure using washers and a back nut, then tighten to form a leak-free seal.
  • For full control of water flow, use the inline valve to regulate discharge and minimise splashes or spills.
  • Ensure the 33mm hole (for the 1" BSP male thread) is clean and square to maintain a solid seal.

Ideal for tradespeople installing or upgrading rainwater systems, this kit combines reliability with practical adaptability, helping you tailor water storage setups to a range of barrels and containers.

Akor
MDPE Pipe Fittings
Ex VAT Inc VAT
CALL US ON
01625 322269
Call us on 01625 322269
Trustpilot
1 10
£8.00
Akor

Water Butt Brass Kit 1" with In-Line Valve + 20mm MDPE
Trustpilot

We're here to help Monday to Friday 8:00 - 5:00

Live Chat or call us on 01625 322269

Delivery

Delivery charges will vary depending on your location.

To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode

We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.

Share information about this product with your customers.

This Water Butt Brass Kit 1" BSP Male to 3/4" BSP Female is a durable, adaptable fitting for rainwater harvesting and fluid storage systems. Built in brass, it’s designed to withstand outdoor conditions and provide a reliable seal over time.

  • 1 x Water Butt Brass 1" BSP Male - 3/4" BSP Female (WB-BR-34BSPF-1BSPM)
  • 1 x PTFE Tape Roll
  • 1 x MDPE Straight Joiner 20mm – ¾” BSP (MDPESTR20-34BSPF)
  • 1 x In-Line Valve ¾” BSP (HCV34BSPM001BLACK)

The 1" BSP male to 3/4" BSP female outlet enables practical adaptation between differing pipe sizes in water butts or containers, making it a versatile choice for upgrading existing installations or adding a new rainwater setup. Brass construction provides longevity in exposed environments, while the included PTFE tape helps achieve a tight seal on threaded connections.

Key features

  • Durable brass body for outdoor resilience and long-term performance
  • Reduces 1" BSP male to 3/4" BSP female, enabling compatibility across common fittings
  • MDPE Straight Joiner 20mm – ¾” BSP to connect 20mm MDPE pipe to the 3/4" BSP thread
  • In-Line valve, ¾” BSPM, with soft-touch operation for precise flow control
  • Plastic inline valve body resists corrosion and build-up, aiding maintenance

Installation notes

  • If your container already has a female thread, screw the 1" BSP male connector directly into place for a seamless fit.
  • If there is no existing thread, create a suitable hole and secure using washers and a back nut, then tighten to form a leak-free seal.
  • For full control of water flow, use the inline valve to regulate discharge and minimise splashes or spills.
  • Ensure the 33mm hole (for the 1" BSP male thread) is clean and square to maintain a solid seal.

Ideal for tradespeople installing or upgrading rainwater systems, this kit combines reliability with practical adaptability, helping you tailor water storage setups to a range of barrels and containers.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Have a question?

If you have any questions about our products or would like to learn more about our shipping options please feel free to contact one of our team today.

Contact Us
Water Butt Brass Kit 1" with In-Line Valve + 20mm MDPE - Armstrong Cheshire
Akor

Water Butt Brass Kit 1" with In-Line Valve + 20mm MDPE

£8.00

This Water Butt Brass Kit 1" BSP Male to 3/4" BSP Female is a durable, adaptable fitting for rainwater harvesting and fluid storage systems. Built in brass, it’s designed to withstand outdoor conditions and provide a reliable seal over time.

  • 1 x Water Butt Brass 1" BSP Male - 3/4" BSP Female (WB-BR-34BSPF-1BSPM)
  • 1 x PTFE Tape Roll
  • 1 x MDPE Straight Joiner 20mm – ¾” BSP (MDPESTR20-34BSPF)
  • 1 x In-Line Valve ¾” BSP (HCV34BSPM001BLACK)

The 1" BSP male to 3/4" BSP female outlet enables practical adaptation between differing pipe sizes in water butts or containers, making it a versatile choice for upgrading existing installations or adding a new rainwater setup. Brass construction provides longevity in exposed environments, while the included PTFE tape helps achieve a tight seal on threaded connections.

Key features

  • Durable brass body for outdoor resilience and long-term performance
  • Reduces 1" BSP male to 3/4" BSP female, enabling compatibility across common fittings
  • MDPE Straight Joiner 20mm – ¾” BSP to connect 20mm MDPE pipe to the 3/4" BSP thread
  • In-Line valve, ¾” BSPM, with soft-touch operation for precise flow control
  • Plastic inline valve body resists corrosion and build-up, aiding maintenance

Installation notes

  • If your container already has a female thread, screw the 1" BSP male connector directly into place for a seamless fit.
  • If there is no existing thread, create a suitable hole and secure using washers and a back nut, then tighten to form a leak-free seal.
  • For full control of water flow, use the inline valve to regulate discharge and minimise splashes or spills.
  • Ensure the 33mm hole (for the 1" BSP male thread) is clean and square to maintain a solid seal.

Ideal for tradespeople installing or upgrading rainwater systems, this kit combines reliability with practical adaptability, helping you tailor water storage setups to a range of barrels and containers.

View product