Wall Flange Kit 32mm MDPE + Lever Valve + 32mm MDPE Joiner is a compact MDPE plumbing set designed for tradespeople tackling water supply and irrigation runs. It combines a wall entry, a straight joiner and a control valve in one kit for quick, reliable connections on piping projects. Kit contents:
  • 1 x MDPE Wall Flange 32mm – ¾” BSP (MDPEWF32-34BSPF)
  • 1 x MDPE Straight Joiner ¾” BSP – 32mm (MDPESTR32-34BSPM)
  • 1 x Lever Valve ¾” BSP (BRVALVE34BSPM-F)
MDPE fittings are chosen for their durability, flexibility and chemical resistance, making them a solid choice for water supply and irrigation. The kit uses threaded compression connections, which provide a tight, leak-free seal without needing specialist tools. MDPE PN10 fittings are engineered to withstand up to 10 bar (roughly 145 psi), supporting reliable operation across a range of domestic and light commercial installations. The wall flange allows the pipe to terminate neatly at a flat surface, improving the finish of exterior taps, sheds, or internal wall penetrations. The straight joiner creates a direct, uninterrupted 32mm MDPE run between components, essential for clean, efficient pipework. The Brass Nickel Plated Lever Valve adds a robust control point within the system. Brass offers strength and corrosion resistance, while the nickel-plated finish helps resist wear and tarnish in practical environments. The lever handle enables smooth, precise on/off operation and reliable performance over time in both residential and commercial settings. Notes for install and use: - This kit is supplied without PTFE tape; please purchase PTFE tape separately if you intend to seal threaded connections. - Ensure 32mm MDPE pipe is clean, cut square and correctly seated into each compression end. Follow standard tightening procedures for compression fittings and check for leaks after initial commissioning. - Suitable for MDPE piping commonly used in water supply and irrigation; not intended for high-temperature or non-approved fluid applications outside manufacturer guidance. In short, this Wall Flange Kit provides a straightforward, weather-resistant, 32mm MDPE solution with a controllable lever valve, ideal for quickly creating secure, serviceable connections in everyday plumbing and irrigation projects.
Akor
MDPE Pipe Fittings
Wall Flange Kit 32mm MDPE + Lever Valve + 32mm MDPE Joiner is a compact MDPE plumbing set designed for tradespeople tackling water supply and irrigation runs. It combines a wall entry, a straight joiner and a control valve in one kit for quick, reliable connections on piping projects. Kit contents:
  • 1 x MDPE Wall Flange 32mm – ¾” BSP (MDPEWF32-34BSPF)
  • 1 x MDPE Straight Joiner ¾” BSP – 32mm (MDPESTR32-34BSPM)
  • 1 x Lever Valve ¾” BSP (BRVALVE34BSPM-F)
MDPE fittings are chosen for their durability, flexibility and chemical resistance, making them a solid choice for water supply and irrigation. The kit uses threaded compression connections, which provide a tight, leak-free seal without needing specialist tools. MDPE PN10 fittings are engineered to withstand up to 10 bar (roughly 145 psi), supporting reliable operation across a range of domestic and light commercial installations. The wall flange allows the pipe to terminate neatly at a flat surface, improving the finish of exterior taps, sheds, or internal wall penetrations. The straight joiner creates a direct, uninterrupted 32mm MDPE run between components, essential for clean, efficient pipework. The Brass Nickel Plated Lever Valve adds a robust control point within the system. Brass offers strength and corrosion resistance, while the nickel-plated finish helps resist wear and tarnish in practical environments. The lever handle enables smooth, precise on/off operation and reliable performance over time in both residential and commercial settings. Notes for install and use: - This kit is supplied without PTFE tape; please purchase PTFE tape separately if you intend to seal threaded connections. - Ensure 32mm MDPE pipe is clean, cut square and correctly seated into each compression end. Follow standard tightening procedures for compression fittings and check for leaks after initial commissioning. - Suitable for MDPE piping commonly used in water supply and irrigation; not intended for high-temperature or non-approved fluid applications outside manufacturer guidance. In short, this Wall Flange Kit provides a straightforward, weather-resistant, 32mm MDPE solution with a controllable lever valve, ideal for quickly creating secure, serviceable connections in everyday plumbing and irrigation projects.
Akor
MDPE Pipe Fittings
Ex VAT Inc VAT
Log in
CALL US ON
01625 322269
Basket
Call us on 01625 322269
£13.00

Wall Flange Kit 32mm MDPE + Lever Valve + 32mm MDPE Joiner


We're here to help Monday to Friday 8:00 - 5:00

Live Chat or call us on 01625 322269

Delivery

Delivery charges will vary depending on your location.

To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode

We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.

Share information about this product with your customers.

Wall Flange Kit 32mm MDPE + Lever Valve + 32mm MDPE Joiner is a compact MDPE plumbing set designed for tradespeople tackling water supply and irrigation runs. It combines a wall entry, a straight joiner and a control valve in one kit for quick, reliable connections on piping projects. Kit contents:
  • 1 x MDPE Wall Flange 32mm – ¾” BSP (MDPEWF32-34BSPF)
  • 1 x MDPE Straight Joiner ¾” BSP – 32mm (MDPESTR32-34BSPM)
  • 1 x Lever Valve ¾” BSP (BRVALVE34BSPM-F)
MDPE fittings are chosen for their durability, flexibility and chemical resistance, making them a solid choice for water supply and irrigation. The kit uses threaded compression connections, which provide a tight, leak-free seal without needing specialist tools. MDPE PN10 fittings are engineered to withstand up to 10 bar (roughly 145 psi), supporting reliable operation across a range of domestic and light commercial installations. The wall flange allows the pipe to terminate neatly at a flat surface, improving the finish of exterior taps, sheds, or internal wall penetrations. The straight joiner creates a direct, uninterrupted 32mm MDPE run between components, essential for clean, efficient pipework. The Brass Nickel Plated Lever Valve adds a robust control point within the system. Brass offers strength and corrosion resistance, while the nickel-plated finish helps resist wear and tarnish in practical environments. The lever handle enables smooth, precise on/off operation and reliable performance over time in both residential and commercial settings. Notes for install and use: - This kit is supplied without PTFE tape; please purchase PTFE tape separately if you intend to seal threaded connections. - Ensure 32mm MDPE pipe is clean, cut square and correctly seated into each compression end. Follow standard tightening procedures for compression fittings and check for leaks after initial commissioning. - Suitable for MDPE piping commonly used in water supply and irrigation; not intended for high-temperature or non-approved fluid applications outside manufacturer guidance. In short, this Wall Flange Kit provides a straightforward, weather-resistant, 32mm MDPE solution with a controllable lever valve, ideal for quickly creating secure, serviceable connections in everyday plumbing and irrigation projects.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Have a question?

If you have any questions about our products or would like to learn more about our shipping options please feel free to contact one of our team today.

Wall Flange Kit 32mm MDPE + Lever Valve + 32mm MDPE Joiner - Armstrong Cheshire
Akor

Wall Flange Kit 32mm MDPE + Lever Valve + 32mm MDPE Joiner

£13.00
Wall Flange Kit 32mm MDPE + Lever Valve + 32mm MDPE Joiner is a compact MDPE plumbing set designed for tradespeople tackling water supply and irrigation runs. It combines a wall entry, a straight joiner and a control valve in one kit for quick, reliable connections on piping projects. Kit contents:
  • 1 x MDPE Wall Flange 32mm – ¾” BSP (MDPEWF32-34BSPF)
  • 1 x MDPE Straight Joiner ¾” BSP – 32mm (MDPESTR32-34BSPM)
  • 1 x Lever Valve ¾” BSP (BRVALVE34BSPM-F)
MDPE fittings are chosen for their durability, flexibility and chemical resistance, making them a solid choice for water supply and irrigation. The kit uses threaded compression connections, which provide a tight, leak-free seal without needing specialist tools. MDPE PN10 fittings are engineered to withstand up to 10 bar (roughly 145 psi), supporting reliable operation across a range of domestic and light commercial installations. The wall flange allows the pipe to terminate neatly at a flat surface, improving the finish of exterior taps, sheds, or internal wall penetrations. The straight joiner creates a direct, uninterrupted 32mm MDPE run between components, essential for clean, efficient pipework. The Brass Nickel Plated Lever Valve adds a robust control point within the system. Brass offers strength and corrosion resistance, while the nickel-plated finish helps resist wear and tarnish in practical environments. The lever handle enables smooth, precise on/off operation and reliable performance over time in both residential and commercial settings. Notes for install and use: - This kit is supplied without PTFE tape; please purchase PTFE tape separately if you intend to seal threaded connections. - Ensure 32mm MDPE pipe is clean, cut square and correctly seated into each compression end. Follow standard tightening procedures for compression fittings and check for leaks after initial commissioning. - Suitable for MDPE piping commonly used in water supply and irrigation; not intended for high-temperature or non-approved fluid applications outside manufacturer guidance. In short, this Wall Flange Kit provides a straightforward, weather-resistant, 32mm MDPE solution with a controllable lever valve, ideal for quickly creating secure, serviceable connections in everyday plumbing and irrigation projects.
View product