Wall Flange Kit 32mm MDPE + Lever Valve + 25mm MDPE Tee is a compact, ready-to-install MDPE piping solution for tradespeople tackling water supply and irrigation jobs. It combines a wall-flange connection, a 25mm MDPE tee, and a ¾" BSP nickel-plated lever valve for reliable shut-off and clean branch connections.

Kit contents

  • 1 x MDPE Wall Flange 32mm – ¾” BSP (MDPEWF32-34BSPF)
  • 1 x MDPE Tee 25mm – ¾” BSP – 25mm (MDPETEE25-34BSPM)
  • 1 x Lever Valve ¾” BSPM-F (BRVALVE34BSPM-F)

Why this kit works for tradespeople

  • Compression connections provide a tight, leak-free seal without needing specialist tools or PTFE tape, making on-site assembly straightforward and-repeatable.
  • MDPE fittings are corrosion-resistant and suited to cold water and irrigation circuits, with a PN10 rating for peaks up to 10 bar (approx. 145 psi).
  • The brass nickel-plated lever valve offers robust operation and durability in both indoor and outdoor installations, with a smooth on/off action for rapid isolation or flow control.
  • Wall flange integration helps secure pipe runs to flat surfaces, reducing movement and potential leaks at the joint.

Technical notes and value proposition

  • MDPE PN10 fittings are designed for water and mild chemical exposure, providing a reliable, low-maintenance solution for piping networks.
  • The kit is ideal for creating a branch from a main MDPE line and for terminating lines at a wall, such as external taps, shed circuits, or irrigation zones.
  • PTFE tape is not included with this kit; ensure you purchase tape separately if required for any threaded connections.

Practical usage tips

  • Match pipe sizes precisely: 32mm to wall flange, 25mm to MDPE tee, with ¾" BSP threads for the valve and flange connections.
  • Secure fittings with appropriate tightening to avoid overtightening that could damage the MDPE threads.
  • Verify the system for leaks after installation and during initial pressure testing at a controlled, safe rate.
Akor
MDPE Pipe Fittings

Wall Flange Kit 32mm MDPE + Lever Valve + 25mm MDPE Tee is a compact, ready-to-install MDPE piping solution for tradespeople tackling water supply and irrigation jobs. It combines a wall-flange connection, a 25mm MDPE tee, and a ¾" BSP nickel-plated lever valve for reliable shut-off and clean branch connections.

Kit contents

  • 1 x MDPE Wall Flange 32mm – ¾” BSP (MDPEWF32-34BSPF)
  • 1 x MDPE Tee 25mm – ¾” BSP – 25mm (MDPETEE25-34BSPM)
  • 1 x Lever Valve ¾” BSPM-F (BRVALVE34BSPM-F)

Why this kit works for tradespeople

  • Compression connections provide a tight, leak-free seal without needing specialist tools or PTFE tape, making on-site assembly straightforward and-repeatable.
  • MDPE fittings are corrosion-resistant and suited to cold water and irrigation circuits, with a PN10 rating for peaks up to 10 bar (approx. 145 psi).
  • The brass nickel-plated lever valve offers robust operation and durability in both indoor and outdoor installations, with a smooth on/off action for rapid isolation or flow control.
  • Wall flange integration helps secure pipe runs to flat surfaces, reducing movement and potential leaks at the joint.

Technical notes and value proposition

  • MDPE PN10 fittings are designed for water and mild chemical exposure, providing a reliable, low-maintenance solution for piping networks.
  • The kit is ideal for creating a branch from a main MDPE line and for terminating lines at a wall, such as external taps, shed circuits, or irrigation zones.
  • PTFE tape is not included with this kit; ensure you purchase tape separately if required for any threaded connections.

Practical usage tips

  • Match pipe sizes precisely: 32mm to wall flange, 25mm to MDPE tee, with ¾" BSP threads for the valve and flange connections.
  • Secure fittings with appropriate tightening to avoid overtightening that could damage the MDPE threads.
  • Verify the system for leaks after installation and during initial pressure testing at a controlled, safe rate.
Akor
MDPE Pipe Fittings
Ex VAT Inc VAT
CALL US ON
01625 322269
Call us on 01625 322269
Trustpilot
1 10
£13.00
Akor

Wall Flange Kit 32mm MDPE + Lever Valve + 25mm MDPE Tee
Trustpilot

We're here to help Monday to Friday 8:00 - 5:00

Live Chat or call us on 01625 322269

Delivery

Delivery charges will vary depending on your location.

To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode

We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.

Share information about this product with your customers.

Wall Flange Kit 32mm MDPE + Lever Valve + 25mm MDPE Tee is a compact, ready-to-install MDPE piping solution for tradespeople tackling water supply and irrigation jobs. It combines a wall-flange connection, a 25mm MDPE tee, and a ¾" BSP nickel-plated lever valve for reliable shut-off and clean branch connections.

Kit contents

  • 1 x MDPE Wall Flange 32mm – ¾” BSP (MDPEWF32-34BSPF)
  • 1 x MDPE Tee 25mm – ¾” BSP – 25mm (MDPETEE25-34BSPM)
  • 1 x Lever Valve ¾” BSPM-F (BRVALVE34BSPM-F)

Why this kit works for tradespeople

  • Compression connections provide a tight, leak-free seal without needing specialist tools or PTFE tape, making on-site assembly straightforward and-repeatable.
  • MDPE fittings are corrosion-resistant and suited to cold water and irrigation circuits, with a PN10 rating for peaks up to 10 bar (approx. 145 psi).
  • The brass nickel-plated lever valve offers robust operation and durability in both indoor and outdoor installations, with a smooth on/off action for rapid isolation or flow control.
  • Wall flange integration helps secure pipe runs to flat surfaces, reducing movement and potential leaks at the joint.

Technical notes and value proposition

  • MDPE PN10 fittings are designed for water and mild chemical exposure, providing a reliable, low-maintenance solution for piping networks.
  • The kit is ideal for creating a branch from a main MDPE line and for terminating lines at a wall, such as external taps, shed circuits, or irrigation zones.
  • PTFE tape is not included with this kit; ensure you purchase tape separately if required for any threaded connections.

Practical usage tips

  • Match pipe sizes precisely: 32mm to wall flange, 25mm to MDPE tee, with ¾" BSP threads for the valve and flange connections.
  • Secure fittings with appropriate tightening to avoid overtightening that could damage the MDPE threads.
  • Verify the system for leaks after installation and during initial pressure testing at a controlled, safe rate.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Have a question?

If you have any questions about our products or would like to learn more about our shipping options please feel free to contact one of our team today.

Contact Us
Wall Flange Kit 32mm MDPE + Lever Valve + 25mm MDPE Tee - Armstrong Cheshire
Akor

Wall Flange Kit 32mm MDPE + Lever Valve + 25mm MDPE Tee

£13.00

Wall Flange Kit 32mm MDPE + Lever Valve + 25mm MDPE Tee is a compact, ready-to-install MDPE piping solution for tradespeople tackling water supply and irrigation jobs. It combines a wall-flange connection, a 25mm MDPE tee, and a ¾" BSP nickel-plated lever valve for reliable shut-off and clean branch connections.

Kit contents

  • 1 x MDPE Wall Flange 32mm – ¾” BSP (MDPEWF32-34BSPF)
  • 1 x MDPE Tee 25mm – ¾” BSP – 25mm (MDPETEE25-34BSPM)
  • 1 x Lever Valve ¾” BSPM-F (BRVALVE34BSPM-F)

Why this kit works for tradespeople

  • Compression connections provide a tight, leak-free seal without needing specialist tools or PTFE tape, making on-site assembly straightforward and-repeatable.
  • MDPE fittings are corrosion-resistant and suited to cold water and irrigation circuits, with a PN10 rating for peaks up to 10 bar (approx. 145 psi).
  • The brass nickel-plated lever valve offers robust operation and durability in both indoor and outdoor installations, with a smooth on/off action for rapid isolation or flow control.
  • Wall flange integration helps secure pipe runs to flat surfaces, reducing movement and potential leaks at the joint.

Technical notes and value proposition

  • MDPE PN10 fittings are designed for water and mild chemical exposure, providing a reliable, low-maintenance solution for piping networks.
  • The kit is ideal for creating a branch from a main MDPE line and for terminating lines at a wall, such as external taps, shed circuits, or irrigation zones.
  • PTFE tape is not included with this kit; ensure you purchase tape separately if required for any threaded connections.

Practical usage tips

  • Match pipe sizes precisely: 32mm to wall flange, 25mm to MDPE tee, with ¾" BSP threads for the valve and flange connections.
  • Secure fittings with appropriate tightening to avoid overtightening that could damage the MDPE threads.
  • Verify the system for leaks after installation and during initial pressure testing at a controlled, safe rate.
View product