The WF32KIT036 is a compact MDPE pipe connection kit designed for 32mm MDPE runs, combining a wall flange, a 20mm straight joiner and a lever valve for straightforward control and neat finishes. Built for tradespeople and DIYers alike, it delivers reliable connections with no need for specialist equipment.

Ideal applications include domestic water supply, garden irrigation, and light industrial piping where a secure, compact connection is required. MDPE fittings are known for durability, flexibility and chemical resistance, and the components in this kit are rated PN10, capable of withstanding up to 10 bar (approximately 145 psi) under typical service conditions.

  • MDPE Wall Flange 32mm – ¾" BSP (MDPEWF32-34BSPF): provides a neat entry point for 32mm MDPE pipe, with a ¾" BSP thread to mate with compatible fittings.
  • MDPE Straight Joiner ¾" BSP – 20mm (MDPESTR20-34BSPM): a straight connector to bridge a 20mm MDPE run to a ¾" BSP thread, enabling direct, inline joins.
  • Lever Valve ¾" BSP (BRVALVE34BSPM-F): brass nickel-plated valve for on/off control, offering durability and smooth operation in both residential and commercial installations.

Key benefits you’ll value on site:

  • Compression connections that seal reliably with standard tools, without the need for specialist equipment.
  • MDPE compatibility with 32mm pipe and 20mm pipe sections, simplifying field joins and reducing stock complexity.
  • Pressure capability up to 10 bar, suitable for typical water supply and irrigation tasks.
  • Corrosion resistance and durability from MDPE fittings and brass nickel-plated lever valve, designed for frequent operation and varied environments.
  • Professional finish with a wall flange to secure piping to a surface and a clean, tidy installation.

Please note, PTFE tape is not included with this kit and should be purchased separately. Ensure pipe ends are cut square and deburred before assembly for the best seal, and verify alignment to avoid stress on fittings.

Akor
MDPE Pipe Fittings

The WF32KIT036 is a compact MDPE pipe connection kit designed for 32mm MDPE runs, combining a wall flange, a 20mm straight joiner and a lever valve for straightforward control and neat finishes. Built for tradespeople and DIYers alike, it delivers reliable connections with no need for specialist equipment.

Ideal applications include domestic water supply, garden irrigation, and light industrial piping where a secure, compact connection is required. MDPE fittings are known for durability, flexibility and chemical resistance, and the components in this kit are rated PN10, capable of withstanding up to 10 bar (approximately 145 psi) under typical service conditions.

  • MDPE Wall Flange 32mm – ¾" BSP (MDPEWF32-34BSPF): provides a neat entry point for 32mm MDPE pipe, with a ¾" BSP thread to mate with compatible fittings.
  • MDPE Straight Joiner ¾" BSP – 20mm (MDPESTR20-34BSPM): a straight connector to bridge a 20mm MDPE run to a ¾" BSP thread, enabling direct, inline joins.
  • Lever Valve ¾" BSP (BRVALVE34BSPM-F): brass nickel-plated valve for on/off control, offering durability and smooth operation in both residential and commercial installations.

Key benefits you’ll value on site:

  • Compression connections that seal reliably with standard tools, without the need for specialist equipment.
  • MDPE compatibility with 32mm pipe and 20mm pipe sections, simplifying field joins and reducing stock complexity.
  • Pressure capability up to 10 bar, suitable for typical water supply and irrigation tasks.
  • Corrosion resistance and durability from MDPE fittings and brass nickel-plated lever valve, designed for frequent operation and varied environments.
  • Professional finish with a wall flange to secure piping to a surface and a clean, tidy installation.

Please note, PTFE tape is not included with this kit and should be purchased separately. Ensure pipe ends are cut square and deburred before assembly for the best seal, and verify alignment to avoid stress on fittings.

Akor
MDPE Pipe Fittings
Ex VAT Inc VAT
CALL US ON
01625 322269
Call us on 01625 322269
Trustpilot
1 11
£12.00
Akor

Wall Flange Kit 32mm MDPE + Lever Valve + 20mm MDPE Straight
Trustpilot

We're here to help Monday to Friday 8:00 - 5:00

Live Chat or call us on 01625 322269

Delivery

Delivery charges will vary depending on your location.

To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode

We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.

Share information about this product with your customers.

The WF32KIT036 is a compact MDPE pipe connection kit designed for 32mm MDPE runs, combining a wall flange, a 20mm straight joiner and a lever valve for straightforward control and neat finishes. Built for tradespeople and DIYers alike, it delivers reliable connections with no need for specialist equipment.

Ideal applications include domestic water supply, garden irrigation, and light industrial piping where a secure, compact connection is required. MDPE fittings are known for durability, flexibility and chemical resistance, and the components in this kit are rated PN10, capable of withstanding up to 10 bar (approximately 145 psi) under typical service conditions.

  • MDPE Wall Flange 32mm – ¾" BSP (MDPEWF32-34BSPF): provides a neat entry point for 32mm MDPE pipe, with a ¾" BSP thread to mate with compatible fittings.
  • MDPE Straight Joiner ¾" BSP – 20mm (MDPESTR20-34BSPM): a straight connector to bridge a 20mm MDPE run to a ¾" BSP thread, enabling direct, inline joins.
  • Lever Valve ¾" BSP (BRVALVE34BSPM-F): brass nickel-plated valve for on/off control, offering durability and smooth operation in both residential and commercial installations.

Key benefits you’ll value on site:

  • Compression connections that seal reliably with standard tools, without the need for specialist equipment.
  • MDPE compatibility with 32mm pipe and 20mm pipe sections, simplifying field joins and reducing stock complexity.
  • Pressure capability up to 10 bar, suitable for typical water supply and irrigation tasks.
  • Corrosion resistance and durability from MDPE fittings and brass nickel-plated lever valve, designed for frequent operation and varied environments.
  • Professional finish with a wall flange to secure piping to a surface and a clean, tidy installation.

Please note, PTFE tape is not included with this kit and should be purchased separately. Ensure pipe ends are cut square and deburred before assembly for the best seal, and verify alignment to avoid stress on fittings.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Have a question?

If you have any questions about our products or would like to learn more about our shipping options please feel free to contact one of our team today.

Contact Us
Wall Flange Kit 32mm MDPE + Lever Valve + 20mm MDPE Straight - Armstrong Cheshire
Akor

Wall Flange Kit 32mm MDPE + Lever Valve + 20mm MDPE Straight

£12.00

The WF32KIT036 is a compact MDPE pipe connection kit designed for 32mm MDPE runs, combining a wall flange, a 20mm straight joiner and a lever valve for straightforward control and neat finishes. Built for tradespeople and DIYers alike, it delivers reliable connections with no need for specialist equipment.

Ideal applications include domestic water supply, garden irrigation, and light industrial piping where a secure, compact connection is required. MDPE fittings are known for durability, flexibility and chemical resistance, and the components in this kit are rated PN10, capable of withstanding up to 10 bar (approximately 145 psi) under typical service conditions.

  • MDPE Wall Flange 32mm – ¾" BSP (MDPEWF32-34BSPF): provides a neat entry point for 32mm MDPE pipe, with a ¾" BSP thread to mate with compatible fittings.
  • MDPE Straight Joiner ¾" BSP – 20mm (MDPESTR20-34BSPM): a straight connector to bridge a 20mm MDPE run to a ¾" BSP thread, enabling direct, inline joins.
  • Lever Valve ¾" BSP (BRVALVE34BSPM-F): brass nickel-plated valve for on/off control, offering durability and smooth operation in both residential and commercial installations.

Key benefits you’ll value on site:

  • Compression connections that seal reliably with standard tools, without the need for specialist equipment.
  • MDPE compatibility with 32mm pipe and 20mm pipe sections, simplifying field joins and reducing stock complexity.
  • Pressure capability up to 10 bar, suitable for typical water supply and irrigation tasks.
  • Corrosion resistance and durability from MDPE fittings and brass nickel-plated lever valve, designed for frequent operation and varied environments.
  • Professional finish with a wall flange to secure piping to a surface and a clean, tidy installation.

Please note, PTFE tape is not included with this kit and should be purchased separately. Ensure pipe ends are cut square and deburred before assembly for the best seal, and verify alignment to avoid stress on fittings.

View product