A compact MDPE wall flange kit that pairs a 32mm MDPE wall flange with a ¾" BSP inlet garden lever tap. Designed for tradespeople and DIY gardeners, it provides a practical, wall-mounted connection for MDPE water and irrigation layouts.

  • 1 x MDPE Wall Flange 32mm – ¾” BSP
  • 1 x Garden Lever Tap with ¾” Barb

MDPE fittings are built to connect MDPE pipe systems reliably, offering durability, flexibility, and chemical resistance. The MDPE PN10 rating indicates a maximum working pressure of 10 bar (approximately 145 psi), making them suitable for typical domestic and light commercial water supply and irrigation applications. The compression connections are designed to create a tight seal with minimal tooling, enabling straightforward installation in a shop wall, utility cupboard, or external wall chase. The wall flange provides a neat method to fix the pipe to a flat surface, helping to keep runs tidy and reduce movement at the joint.

The Garden Lever Tap features a ¾ BSPM inlet and a ¾ barb hose outlet. Constructed with zinc-nickel plating, it offers robust corrosion resistance for outdoor use and frequent operation. The lever mechanism allows quick on/off control, and the ¾" barb is designed to provide a secure, leak-free hose connection when pushed onto the hose and locked in place. This setup supports a range of garden watering tasks—from slow drips for delicate plants to higher flows for filling canisters or equipment.

Installation is straightforward and does not require specialist tools beyond basic hand tools. Note that PTFE tape is not included with this kit and should be purchased separately if thread sealing is required on any threaded connections. For best results, follow standard MDPE compression practices and ensure the hose is fully seated on the barb before use.

Who is this kit for? It suits tradespeople installing MDPE networks in gardens, landscapers setting up irrigation mains, and builders looking for a compact, durable wall-fed solution. Compared with loose fittings, the combination of a dedicated wall flange and a lever tap offers a compact, weather-resistant end point for MDPE piping, reducing leak paths and simplifying future maintenance. It’s a practical choice where a solid wall fix and a reliable hose connection are priorities for water supply and irrigation tasks.

Akor
MDPE Pipe Fittings

A compact MDPE wall flange kit that pairs a 32mm MDPE wall flange with a ¾" BSP inlet garden lever tap. Designed for tradespeople and DIY gardeners, it provides a practical, wall-mounted connection for MDPE water and irrigation layouts.

  • 1 x MDPE Wall Flange 32mm – ¾” BSP
  • 1 x Garden Lever Tap with ¾” Barb

MDPE fittings are built to connect MDPE pipe systems reliably, offering durability, flexibility, and chemical resistance. The MDPE PN10 rating indicates a maximum working pressure of 10 bar (approximately 145 psi), making them suitable for typical domestic and light commercial water supply and irrigation applications. The compression connections are designed to create a tight seal with minimal tooling, enabling straightforward installation in a shop wall, utility cupboard, or external wall chase. The wall flange provides a neat method to fix the pipe to a flat surface, helping to keep runs tidy and reduce movement at the joint.

The Garden Lever Tap features a ¾ BSPM inlet and a ¾ barb hose outlet. Constructed with zinc-nickel plating, it offers robust corrosion resistance for outdoor use and frequent operation. The lever mechanism allows quick on/off control, and the ¾" barb is designed to provide a secure, leak-free hose connection when pushed onto the hose and locked in place. This setup supports a range of garden watering tasks—from slow drips for delicate plants to higher flows for filling canisters or equipment.

Installation is straightforward and does not require specialist tools beyond basic hand tools. Note that PTFE tape is not included with this kit and should be purchased separately if thread sealing is required on any threaded connections. For best results, follow standard MDPE compression practices and ensure the hose is fully seated on the barb before use.

Who is this kit for? It suits tradespeople installing MDPE networks in gardens, landscapers setting up irrigation mains, and builders looking for a compact, durable wall-fed solution. Compared with loose fittings, the combination of a dedicated wall flange and a lever tap offers a compact, weather-resistant end point for MDPE piping, reducing leak paths and simplifying future maintenance. It’s a practical choice where a solid wall fix and a reliable hose connection are priorities for water supply and irrigation tasks.

Akor
MDPE Pipe Fittings
Ex VAT Inc VAT
CALL US ON
01625 322269
Call us on 01625 322269
Trustpilot
1 6
£11.00
Akor

Wall Flange Kit 32mm MDPE + Lever Tap 3/4" Barb
Trustpilot

We're here to help Monday to Friday 8:00 - 5:00

Live Chat or call us on 01625 322269

Delivery

Delivery charges will vary depending on your location.

To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode

We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.

Share information about this product with your customers.

A compact MDPE wall flange kit that pairs a 32mm MDPE wall flange with a ¾" BSP inlet garden lever tap. Designed for tradespeople and DIY gardeners, it provides a practical, wall-mounted connection for MDPE water and irrigation layouts.

  • 1 x MDPE Wall Flange 32mm – ¾” BSP
  • 1 x Garden Lever Tap with ¾” Barb

MDPE fittings are built to connect MDPE pipe systems reliably, offering durability, flexibility, and chemical resistance. The MDPE PN10 rating indicates a maximum working pressure of 10 bar (approximately 145 psi), making them suitable for typical domestic and light commercial water supply and irrigation applications. The compression connections are designed to create a tight seal with minimal tooling, enabling straightforward installation in a shop wall, utility cupboard, or external wall chase. The wall flange provides a neat method to fix the pipe to a flat surface, helping to keep runs tidy and reduce movement at the joint.

The Garden Lever Tap features a ¾ BSPM inlet and a ¾ barb hose outlet. Constructed with zinc-nickel plating, it offers robust corrosion resistance for outdoor use and frequent operation. The lever mechanism allows quick on/off control, and the ¾" barb is designed to provide a secure, leak-free hose connection when pushed onto the hose and locked in place. This setup supports a range of garden watering tasks—from slow drips for delicate plants to higher flows for filling canisters or equipment.

Installation is straightforward and does not require specialist tools beyond basic hand tools. Note that PTFE tape is not included with this kit and should be purchased separately if thread sealing is required on any threaded connections. For best results, follow standard MDPE compression practices and ensure the hose is fully seated on the barb before use.

Who is this kit for? It suits tradespeople installing MDPE networks in gardens, landscapers setting up irrigation mains, and builders looking for a compact, durable wall-fed solution. Compared with loose fittings, the combination of a dedicated wall flange and a lever tap offers a compact, weather-resistant end point for MDPE piping, reducing leak paths and simplifying future maintenance. It’s a practical choice where a solid wall fix and a reliable hose connection are priorities for water supply and irrigation tasks.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Have a question?

If you have any questions about our products or would like to learn more about our shipping options please feel free to contact one of our team today.

Contact Us
Wall Flange Kit 32mm MDPE + Lever Tap 3/4" Barb - Armstrong Cheshire
Akor

Wall Flange Kit 32mm MDPE + Lever Tap 3/4" Barb

£11.00

A compact MDPE wall flange kit that pairs a 32mm MDPE wall flange with a ¾" BSP inlet garden lever tap. Designed for tradespeople and DIY gardeners, it provides a practical, wall-mounted connection for MDPE water and irrigation layouts.

  • 1 x MDPE Wall Flange 32mm – ¾” BSP
  • 1 x Garden Lever Tap with ¾” Barb

MDPE fittings are built to connect MDPE pipe systems reliably, offering durability, flexibility, and chemical resistance. The MDPE PN10 rating indicates a maximum working pressure of 10 bar (approximately 145 psi), making them suitable for typical domestic and light commercial water supply and irrigation applications. The compression connections are designed to create a tight seal with minimal tooling, enabling straightforward installation in a shop wall, utility cupboard, or external wall chase. The wall flange provides a neat method to fix the pipe to a flat surface, helping to keep runs tidy and reduce movement at the joint.

The Garden Lever Tap features a ¾ BSPM inlet and a ¾ barb hose outlet. Constructed with zinc-nickel plating, it offers robust corrosion resistance for outdoor use and frequent operation. The lever mechanism allows quick on/off control, and the ¾" barb is designed to provide a secure, leak-free hose connection when pushed onto the hose and locked in place. This setup supports a range of garden watering tasks—from slow drips for delicate plants to higher flows for filling canisters or equipment.

Installation is straightforward and does not require specialist tools beyond basic hand tools. Note that PTFE tape is not included with this kit and should be purchased separately if thread sealing is required on any threaded connections. For best results, follow standard MDPE compression practices and ensure the hose is fully seated on the barb before use.

Who is this kit for? It suits tradespeople installing MDPE networks in gardens, landscapers setting up irrigation mains, and builders looking for a compact, durable wall-fed solution. Compared with loose fittings, the combination of a dedicated wall flange and a lever tap offers a compact, weather-resistant end point for MDPE piping, reducing leak paths and simplifying future maintenance. It’s a practical choice where a solid wall fix and a reliable hose connection are priorities for water supply and irrigation tasks.

View product