This Wall Flange Kit 32mm MDPE + In-Line Valve & Female Quick Connector is a ready-to-install solution for connecting 32mm MDPE pipework to a flat wall. It’s aimed at tradespeople and hands-on builders seeking a reliable, compression-based seal without specialist tooling.

  • What’s included – 1 x MDPE Wall Flange 32mm – ¾” BSP (MDPEWF32-34BSPF); 1 x In-Line Valve ¾” BSP (HCV34BSPM001BLACK); 1 x Female Hose Connector with ¾” BSPF Thread (EXPAND34BSPF-FEM001B).
  • Key features – MDPE PN10 fittings rated to withstand up to 10 bar (approximately 145 psi), suitable for domestic water and irrigation runs. Compression connections provide a tight, leak-free seal without the need for specialist equipment. The wall flange offers a neat, secure entry point into flat surfaces, helping align the line and reduce movement.
  • Valve and connector design – The In-Line Soft Touch Valve is a robust plastic component with a ¾” BSPM inlet and outlet. It delivers smooth on/off control, easy hand operation, and a secure seal when closed, reducing the risk of drips in active systems. The Female Hose Connector provides a compatible ¾” BSPF thread for hose and accessory compatibility.
  • Material and durability – MDPE fittings are known for durability, chemical resistance and flexibility, which helps minimise stress on joints and extend service life in water and irrigation applications. The plastic construction of the valve keeps the assembly lighter than metal equivalents while maintaining resilience in typical site environments.
  • Applications – Ideal for domestic water supplies, garden irrigation mains, shed or outbuilding line runs, and temporary or permanent installations where a wall-entry point with controllable flow is desired. The kit’s 32mmMDPE compatibility supports standard MDPE piping used in many UK systems.
  • Installation tips – Ensure MDPE pipe ends are clean and square before seating into the compression fittings. Mount the wall flange securely to a flat surface and orient the valve handle for convenient access. The compression connections are designed for straightforward assembly without special tools; check for leaks after initial pressurisation and tighten as needed.
  • Maintenance – Regularly inspect for leaks at the wall flange, valve and connector joints. Clean the valve exterior if needed to maintain smooth operation, and replace any damaged seals or fittings to preserve system integrity.
Akor
MDPE Pipe Fittings

This Wall Flange Kit 32mm MDPE + In-Line Valve & Female Quick Connector is a ready-to-install solution for connecting 32mm MDPE pipework to a flat wall. It’s aimed at tradespeople and hands-on builders seeking a reliable, compression-based seal without specialist tooling.

  • What’s included – 1 x MDPE Wall Flange 32mm – ¾” BSP (MDPEWF32-34BSPF); 1 x In-Line Valve ¾” BSP (HCV34BSPM001BLACK); 1 x Female Hose Connector with ¾” BSPF Thread (EXPAND34BSPF-FEM001B).
  • Key features – MDPE PN10 fittings rated to withstand up to 10 bar (approximately 145 psi), suitable for domestic water and irrigation runs. Compression connections provide a tight, leak-free seal without the need for specialist equipment. The wall flange offers a neat, secure entry point into flat surfaces, helping align the line and reduce movement.
  • Valve and connector design – The In-Line Soft Touch Valve is a robust plastic component with a ¾” BSPM inlet and outlet. It delivers smooth on/off control, easy hand operation, and a secure seal when closed, reducing the risk of drips in active systems. The Female Hose Connector provides a compatible ¾” BSPF thread for hose and accessory compatibility.
  • Material and durability – MDPE fittings are known for durability, chemical resistance and flexibility, which helps minimise stress on joints and extend service life in water and irrigation applications. The plastic construction of the valve keeps the assembly lighter than metal equivalents while maintaining resilience in typical site environments.
  • Applications – Ideal for domestic water supplies, garden irrigation mains, shed or outbuilding line runs, and temporary or permanent installations where a wall-entry point with controllable flow is desired. The kit’s 32mmMDPE compatibility supports standard MDPE piping used in many UK systems.
  • Installation tips – Ensure MDPE pipe ends are clean and square before seating into the compression fittings. Mount the wall flange securely to a flat surface and orient the valve handle for convenient access. The compression connections are designed for straightforward assembly without special tools; check for leaks after initial pressurisation and tighten as needed.
  • Maintenance – Regularly inspect for leaks at the wall flange, valve and connector joints. Clean the valve exterior if needed to maintain smooth operation, and replace any damaged seals or fittings to preserve system integrity.
Akor
MDPE Pipe Fittings
Ex VAT Inc VAT
CALL US ON
01625 322269
Call us on 01625 322269
Trustpilot
1 10
£7.00
Akor

Wall Flange Kit 32mm MDPE + In-Line Valve & Female Quick Connector
Trustpilot

We're here to help Monday to Friday 8:00 - 5:00

Live Chat or call us on 01625 322269

Delivery

Delivery charges will vary depending on your location.

To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode

We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.

Share information about this product with your customers.

This Wall Flange Kit 32mm MDPE + In-Line Valve & Female Quick Connector is a ready-to-install solution for connecting 32mm MDPE pipework to a flat wall. It’s aimed at tradespeople and hands-on builders seeking a reliable, compression-based seal without specialist tooling.

  • What’s included – 1 x MDPE Wall Flange 32mm – ¾” BSP (MDPEWF32-34BSPF); 1 x In-Line Valve ¾” BSP (HCV34BSPM001BLACK); 1 x Female Hose Connector with ¾” BSPF Thread (EXPAND34BSPF-FEM001B).
  • Key features – MDPE PN10 fittings rated to withstand up to 10 bar (approximately 145 psi), suitable for domestic water and irrigation runs. Compression connections provide a tight, leak-free seal without the need for specialist equipment. The wall flange offers a neat, secure entry point into flat surfaces, helping align the line and reduce movement.
  • Valve and connector design – The In-Line Soft Touch Valve is a robust plastic component with a ¾” BSPM inlet and outlet. It delivers smooth on/off control, easy hand operation, and a secure seal when closed, reducing the risk of drips in active systems. The Female Hose Connector provides a compatible ¾” BSPF thread for hose and accessory compatibility.
  • Material and durability – MDPE fittings are known for durability, chemical resistance and flexibility, which helps minimise stress on joints and extend service life in water and irrigation applications. The plastic construction of the valve keeps the assembly lighter than metal equivalents while maintaining resilience in typical site environments.
  • Applications – Ideal for domestic water supplies, garden irrigation mains, shed or outbuilding line runs, and temporary or permanent installations where a wall-entry point with controllable flow is desired. The kit’s 32mmMDPE compatibility supports standard MDPE piping used in many UK systems.
  • Installation tips – Ensure MDPE pipe ends are clean and square before seating into the compression fittings. Mount the wall flange securely to a flat surface and orient the valve handle for convenient access. The compression connections are designed for straightforward assembly without special tools; check for leaks after initial pressurisation and tighten as needed.
  • Maintenance – Regularly inspect for leaks at the wall flange, valve and connector joints. Clean the valve exterior if needed to maintain smooth operation, and replace any damaged seals or fittings to preserve system integrity.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Have a question?

If you have any questions about our products or would like to learn more about our shipping options please feel free to contact one of our team today.

Contact Us
Wall Flange Kit 32mm MDPE + In-Line Valve & Female Quick Connector - Armstrong Cheshire
Akor

Wall Flange Kit 32mm MDPE + In-Line Valve & Female Quick Connector

£7.00

This Wall Flange Kit 32mm MDPE + In-Line Valve & Female Quick Connector is a ready-to-install solution for connecting 32mm MDPE pipework to a flat wall. It’s aimed at tradespeople and hands-on builders seeking a reliable, compression-based seal without specialist tooling.

  • What’s included – 1 x MDPE Wall Flange 32mm – ¾” BSP (MDPEWF32-34BSPF); 1 x In-Line Valve ¾” BSP (HCV34BSPM001BLACK); 1 x Female Hose Connector with ¾” BSPF Thread (EXPAND34BSPF-FEM001B).
  • Key features – MDPE PN10 fittings rated to withstand up to 10 bar (approximately 145 psi), suitable for domestic water and irrigation runs. Compression connections provide a tight, leak-free seal without the need for specialist equipment. The wall flange offers a neat, secure entry point into flat surfaces, helping align the line and reduce movement.
  • Valve and connector design – The In-Line Soft Touch Valve is a robust plastic component with a ¾” BSPM inlet and outlet. It delivers smooth on/off control, easy hand operation, and a secure seal when closed, reducing the risk of drips in active systems. The Female Hose Connector provides a compatible ¾” BSPF thread for hose and accessory compatibility.
  • Material and durability – MDPE fittings are known for durability, chemical resistance and flexibility, which helps minimise stress on joints and extend service life in water and irrigation applications. The plastic construction of the valve keeps the assembly lighter than metal equivalents while maintaining resilience in typical site environments.
  • Applications – Ideal for domestic water supplies, garden irrigation mains, shed or outbuilding line runs, and temporary or permanent installations where a wall-entry point with controllable flow is desired. The kit’s 32mmMDPE compatibility supports standard MDPE piping used in many UK systems.
  • Installation tips – Ensure MDPE pipe ends are clean and square before seating into the compression fittings. Mount the wall flange securely to a flat surface and orient the valve handle for convenient access. The compression connections are designed for straightforward assembly without special tools; check for leaks after initial pressurisation and tighten as needed.
  • Maintenance – Regularly inspect for leaks at the wall flange, valve and connector joints. Clean the valve exterior if needed to maintain smooth operation, and replace any damaged seals or fittings to preserve system integrity.
View product