The Wall Flange Kit 32mm MDPE + Direct Hose Connector is a practical pairing for securing a 32mm MDPE run to a flat surface and tying in a ½" hose. Built for on-site use, it combines a 32mm MDPE wall flange with a direct hose connector to provide a reliable, straightforward connection.

Kit contents

  • 1 x MDPE Wall Flange 32mm – ¾” BSP (MDPEWF32-34BSPF)
  • 1 x Hose Mender Direct Connector for ½” Hose (HC12-TH-MENDERLIME)

Key features and benefits

  • MDPE fittings are designed for water supply, irrigation and light industrial use, offering durability, flexibility and chemical resistance in common piping scenarios.
  • Compression connections provide a tight seal when tightened to standard torque guidelines, without the need for specialist tooling.
  • Wall flange fittings enable secure attachment of pipework to flat surfaces, improving stability and reducing movement in exposed installations.
  • The hose mender direct connector uses a BSP thread and a teeth-profile grip to help maintain a secure, leak‑tight connection on a ½" hose, reducing the chance of disconnection under use.
  • MDPE PN10 fittings are engineered to withstand up to 10 bar (approximately 145 psi), supporting typical domestic and light commercial pressures.
  • Weather and chemical resistance contribute to longevity in varied outdoor or industrial environments.

Practical use and considerations

This kit is well suited to water supply lines, garden irrigation setups and portable or temporary installations where a flat-surface mount and hose connection are required. The components are designed to be compatible with standard MDPE pipe and ½" hoses, and can be installed with common hand tools. Note that PTFE tape is not included and should be purchased separately if your installation method requires it.

Akor
MDPE Pipe Fittings

The Wall Flange Kit 32mm MDPE + Direct Hose Connector is a practical pairing for securing a 32mm MDPE run to a flat surface and tying in a ½" hose. Built for on-site use, it combines a 32mm MDPE wall flange with a direct hose connector to provide a reliable, straightforward connection.

Kit contents

  • 1 x MDPE Wall Flange 32mm – ¾” BSP (MDPEWF32-34BSPF)
  • 1 x Hose Mender Direct Connector for ½” Hose (HC12-TH-MENDERLIME)

Key features and benefits

  • MDPE fittings are designed for water supply, irrigation and light industrial use, offering durability, flexibility and chemical resistance in common piping scenarios.
  • Compression connections provide a tight seal when tightened to standard torque guidelines, without the need for specialist tooling.
  • Wall flange fittings enable secure attachment of pipework to flat surfaces, improving stability and reducing movement in exposed installations.
  • The hose mender direct connector uses a BSP thread and a teeth-profile grip to help maintain a secure, leak‑tight connection on a ½" hose, reducing the chance of disconnection under use.
  • MDPE PN10 fittings are engineered to withstand up to 10 bar (approximately 145 psi), supporting typical domestic and light commercial pressures.
  • Weather and chemical resistance contribute to longevity in varied outdoor or industrial environments.

Practical use and considerations

This kit is well suited to water supply lines, garden irrigation setups and portable or temporary installations where a flat-surface mount and hose connection are required. The components are designed to be compatible with standard MDPE pipe and ½" hoses, and can be installed with common hand tools. Note that PTFE tape is not included and should be purchased separately if your installation method requires it.

Akor
MDPE Pipe Fittings
Ex VAT Inc VAT
Log in
CALL US ON
01625 322269
Basket
Call us on 01625 322269
£6.00

Wall Flange Kit 32mm MDPE + Direct Hose Connector


We're here to help Monday to Friday 8:00 - 5:00

Live Chat or call us on 01625 322269

Delivery

Delivery charges will vary depending on your location.

To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode

We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.

Share information about this product with your customers.

The Wall Flange Kit 32mm MDPE + Direct Hose Connector is a practical pairing for securing a 32mm MDPE run to a flat surface and tying in a ½" hose. Built for on-site use, it combines a 32mm MDPE wall flange with a direct hose connector to provide a reliable, straightforward connection.

Kit contents

  • 1 x MDPE Wall Flange 32mm – ¾” BSP (MDPEWF32-34BSPF)
  • 1 x Hose Mender Direct Connector for ½” Hose (HC12-TH-MENDERLIME)

Key features and benefits

  • MDPE fittings are designed for water supply, irrigation and light industrial use, offering durability, flexibility and chemical resistance in common piping scenarios.
  • Compression connections provide a tight seal when tightened to standard torque guidelines, without the need for specialist tooling.
  • Wall flange fittings enable secure attachment of pipework to flat surfaces, improving stability and reducing movement in exposed installations.
  • The hose mender direct connector uses a BSP thread and a teeth-profile grip to help maintain a secure, leak‑tight connection on a ½" hose, reducing the chance of disconnection under use.
  • MDPE PN10 fittings are engineered to withstand up to 10 bar (approximately 145 psi), supporting typical domestic and light commercial pressures.
  • Weather and chemical resistance contribute to longevity in varied outdoor or industrial environments.

Practical use and considerations

This kit is well suited to water supply lines, garden irrigation setups and portable or temporary installations where a flat-surface mount and hose connection are required. The components are designed to be compatible with standard MDPE pipe and ½" hoses, and can be installed with common hand tools. Note that PTFE tape is not included and should be purchased separately if your installation method requires it.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Have a question?

If you have any questions about our products or would like to learn more about our shipping options please feel free to contact one of our team today.

Wall Flange Kit 32mm MDPE + Direct Hose Connector - Armstrong Cheshire
Akor

Wall Flange Kit 32mm MDPE + Direct Hose Connector

£6.00

The Wall Flange Kit 32mm MDPE + Direct Hose Connector is a practical pairing for securing a 32mm MDPE run to a flat surface and tying in a ½" hose. Built for on-site use, it combines a 32mm MDPE wall flange with a direct hose connector to provide a reliable, straightforward connection.

Kit contents

  • 1 x MDPE Wall Flange 32mm – ¾” BSP (MDPEWF32-34BSPF)
  • 1 x Hose Mender Direct Connector for ½” Hose (HC12-TH-MENDERLIME)

Key features and benefits

  • MDPE fittings are designed for water supply, irrigation and light industrial use, offering durability, flexibility and chemical resistance in common piping scenarios.
  • Compression connections provide a tight seal when tightened to standard torque guidelines, without the need for specialist tooling.
  • Wall flange fittings enable secure attachment of pipework to flat surfaces, improving stability and reducing movement in exposed installations.
  • The hose mender direct connector uses a BSP thread and a teeth-profile grip to help maintain a secure, leak‑tight connection on a ½" hose, reducing the chance of disconnection under use.
  • MDPE PN10 fittings are engineered to withstand up to 10 bar (approximately 145 psi), supporting typical domestic and light commercial pressures.
  • Weather and chemical resistance contribute to longevity in varied outdoor or industrial environments.

Practical use and considerations

This kit is well suited to water supply lines, garden irrigation setups and portable or temporary installations where a flat-surface mount and hose connection are required. The components are designed to be compatible with standard MDPE pipe and ½" hoses, and can be installed with common hand tools. Note that PTFE tape is not included and should be purchased separately if your installation method requires it.

View product