WF32KIT023 is a compact MDPE wall-flange kit for 32mm MDPE piping, delivering a neat, wall-mounted outlet with an integrated valve and direct hose connection. It’s aimed at tradespeople and installers tackling water supply or irrigation runs where a robust, straightforward fit is required.

What’s in the kit

  • MDPE Wall Flange 32mm – ¾" BSP (MDPEWF32-34BSPF)
  • Hose Mender Direct Connector (HC12-TH-MENDERLIME) – ½" hose connection
  • MDPE Valve 32mm (MDPEVALVE32) – MDPE compatible shut‑off

Key specifications and practical benefits

  • Pressure rating: MDPE PN10 fittings are engineered to handle up to 10 bar, making them suitable for domestic mains and irrigation systems in typical UK conditions.
  • Material and durability: MDPE fittings offer good chemical resistance, flexibility and long‑term durability, with a design that tolerates outdoor weathering when installed correctly.
  • Compression-connection system: The kit uses threaded compression connections that provide a tight, leak‑free seal without the need for specialist tooling. This supports fast on‑site assembly and easier future maintenance.
  • Wall‑mounted outlet: The wall flange enables a tidy connection point to a flat surface, reducing strain on the pipe run and improving the appearance and reliability of external installations.
  • Flow control: The integrated MDPE valve allows you to isolate the line for service or testing without draining the whole system, which is particularly helpful in garden irrigation or external water lines.
  • Direct hose connection: The hose mender features a BSP thread designed to secure ½" hose pipe efficiently, with a teeth profile intended to minimise hose movement and leaks under pressure.
  • Installation note: PTFE tape is not included with this kit and should be purchased separately if your application requires it for thread sealing.

Use cases and installation tips

  • External water points for garden taps, irrigation runs and pond lines where a wall outlet is preferred.
  • Temporary or permanent connections to flat surfaces in sheds, garages or outbuildings where controlled isolation is beneficial.
  • Sites needing a quick, reliable MDPE connection with a dedicated shut‑off for maintenance or testing.

Designed for straightforward on‑site fitting, this kit helps tradespeople save time by pairing a wall flange, valve and hose connection in one assembly. It provides a clear, durable interface for MDPE piping while maintaining simplicity and accessibility for routine servicing.

Akor
MDPE Pipe Fittings

WF32KIT023 is a compact MDPE wall-flange kit for 32mm MDPE piping, delivering a neat, wall-mounted outlet with an integrated valve and direct hose connection. It’s aimed at tradespeople and installers tackling water supply or irrigation runs where a robust, straightforward fit is required.

What’s in the kit

  • MDPE Wall Flange 32mm – ¾" BSP (MDPEWF32-34BSPF)
  • Hose Mender Direct Connector (HC12-TH-MENDERLIME) – ½" hose connection
  • MDPE Valve 32mm (MDPEVALVE32) – MDPE compatible shut‑off

Key specifications and practical benefits

  • Pressure rating: MDPE PN10 fittings are engineered to handle up to 10 bar, making them suitable for domestic mains and irrigation systems in typical UK conditions.
  • Material and durability: MDPE fittings offer good chemical resistance, flexibility and long‑term durability, with a design that tolerates outdoor weathering when installed correctly.
  • Compression-connection system: The kit uses threaded compression connections that provide a tight, leak‑free seal without the need for specialist tooling. This supports fast on‑site assembly and easier future maintenance.
  • Wall‑mounted outlet: The wall flange enables a tidy connection point to a flat surface, reducing strain on the pipe run and improving the appearance and reliability of external installations.
  • Flow control: The integrated MDPE valve allows you to isolate the line for service or testing without draining the whole system, which is particularly helpful in garden irrigation or external water lines.
  • Direct hose connection: The hose mender features a BSP thread designed to secure ½" hose pipe efficiently, with a teeth profile intended to minimise hose movement and leaks under pressure.
  • Installation note: PTFE tape is not included with this kit and should be purchased separately if your application requires it for thread sealing.

Use cases and installation tips

  • External water points for garden taps, irrigation runs and pond lines where a wall outlet is preferred.
  • Temporary or permanent connections to flat surfaces in sheds, garages or outbuildings where controlled isolation is beneficial.
  • Sites needing a quick, reliable MDPE connection with a dedicated shut‑off for maintenance or testing.

Designed for straightforward on‑site fitting, this kit helps tradespeople save time by pairing a wall flange, valve and hose connection in one assembly. It provides a clear, durable interface for MDPE piping while maintaining simplicity and accessibility for routine servicing.

Akor
MDPE Pipe Fittings
Ex VAT Inc VAT
CALL US ON
01625 322269
Call us on 01625 322269
Trustpilot
1 11
£11.00
Akor

Wall Flange Kit 32mm MDPE + 32mm MDPE Valve + Direct Hose Connector
Trustpilot

We're here to help Monday to Friday 8:00 - 5:00

Live Chat or call us on 01625 322269

Delivery

Delivery charges will vary depending on your location.

To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode

We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.

Share information about this product with your customers.

WF32KIT023 is a compact MDPE wall-flange kit for 32mm MDPE piping, delivering a neat, wall-mounted outlet with an integrated valve and direct hose connection. It’s aimed at tradespeople and installers tackling water supply or irrigation runs where a robust, straightforward fit is required.

What’s in the kit

  • MDPE Wall Flange 32mm – ¾" BSP (MDPEWF32-34BSPF)
  • Hose Mender Direct Connector (HC12-TH-MENDERLIME) – ½" hose connection
  • MDPE Valve 32mm (MDPEVALVE32) – MDPE compatible shut‑off

Key specifications and practical benefits

  • Pressure rating: MDPE PN10 fittings are engineered to handle up to 10 bar, making them suitable for domestic mains and irrigation systems in typical UK conditions.
  • Material and durability: MDPE fittings offer good chemical resistance, flexibility and long‑term durability, with a design that tolerates outdoor weathering when installed correctly.
  • Compression-connection system: The kit uses threaded compression connections that provide a tight, leak‑free seal without the need for specialist tooling. This supports fast on‑site assembly and easier future maintenance.
  • Wall‑mounted outlet: The wall flange enables a tidy connection point to a flat surface, reducing strain on the pipe run and improving the appearance and reliability of external installations.
  • Flow control: The integrated MDPE valve allows you to isolate the line for service or testing without draining the whole system, which is particularly helpful in garden irrigation or external water lines.
  • Direct hose connection: The hose mender features a BSP thread designed to secure ½" hose pipe efficiently, with a teeth profile intended to minimise hose movement and leaks under pressure.
  • Installation note: PTFE tape is not included with this kit and should be purchased separately if your application requires it for thread sealing.

Use cases and installation tips

  • External water points for garden taps, irrigation runs and pond lines where a wall outlet is preferred.
  • Temporary or permanent connections to flat surfaces in sheds, garages or outbuildings where controlled isolation is beneficial.
  • Sites needing a quick, reliable MDPE connection with a dedicated shut‑off for maintenance or testing.

Designed for straightforward on‑site fitting, this kit helps tradespeople save time by pairing a wall flange, valve and hose connection in one assembly. It provides a clear, durable interface for MDPE piping while maintaining simplicity and accessibility for routine servicing.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Have a question?

If you have any questions about our products or would like to learn more about our shipping options please feel free to contact one of our team today.

Contact Us
Wall Flange Kit 32mm MDPE + 32mm MDPE Valve + Direct Hose Connector - Armstrong Cheshire
Akor

Wall Flange Kit 32mm MDPE + 32mm MDPE Valve + Direct Hose Connector

£11.00

WF32KIT023 is a compact MDPE wall-flange kit for 32mm MDPE piping, delivering a neat, wall-mounted outlet with an integrated valve and direct hose connection. It’s aimed at tradespeople and installers tackling water supply or irrigation runs where a robust, straightforward fit is required.

What’s in the kit

  • MDPE Wall Flange 32mm – ¾" BSP (MDPEWF32-34BSPF)
  • Hose Mender Direct Connector (HC12-TH-MENDERLIME) – ½" hose connection
  • MDPE Valve 32mm (MDPEVALVE32) – MDPE compatible shut‑off

Key specifications and practical benefits

  • Pressure rating: MDPE PN10 fittings are engineered to handle up to 10 bar, making them suitable for domestic mains and irrigation systems in typical UK conditions.
  • Material and durability: MDPE fittings offer good chemical resistance, flexibility and long‑term durability, with a design that tolerates outdoor weathering when installed correctly.
  • Compression-connection system: The kit uses threaded compression connections that provide a tight, leak‑free seal without the need for specialist tooling. This supports fast on‑site assembly and easier future maintenance.
  • Wall‑mounted outlet: The wall flange enables a tidy connection point to a flat surface, reducing strain on the pipe run and improving the appearance and reliability of external installations.
  • Flow control: The integrated MDPE valve allows you to isolate the line for service or testing without draining the whole system, which is particularly helpful in garden irrigation or external water lines.
  • Direct hose connection: The hose mender features a BSP thread designed to secure ½" hose pipe efficiently, with a teeth profile intended to minimise hose movement and leaks under pressure.
  • Installation note: PTFE tape is not included with this kit and should be purchased separately if your application requires it for thread sealing.

Use cases and installation tips

  • External water points for garden taps, irrigation runs and pond lines where a wall outlet is preferred.
  • Temporary or permanent connections to flat surfaces in sheds, garages or outbuildings where controlled isolation is beneficial.
  • Sites needing a quick, reliable MDPE connection with a dedicated shut‑off for maintenance or testing.

Designed for straightforward on‑site fitting, this kit helps tradespeople save time by pairing a wall flange, valve and hose connection in one assembly. It provides a clear, durable interface for MDPE piping while maintaining simplicity and accessibility for routine servicing.

View product