A compact MDPE connection kit for 32mm piping, combining a wall flange, a 32mm MDPE valve and two Geka-type fittings in one practical package. Designed for water supply, irrigation and light industrial piping, it delivers robust, corrosion‑resistant joints with straightforward compression connections.

  • MDPE Wall Flange 32mm – ¾” BSP (MDPEWF32-34BSPF)
  • MDPE Valve 32mm (MDPEVALVE32)
  • Geka Type Fitting ¾” BSP (GK34BSPM)
  • Geka Type Fitting 19mm Barb (GK19MM)

The kit uses MDPE fittings that are engineered for durability, flexibility and chemical resistance, making them a common choice for domestic water and irrigation projects. The wall flange provides a secure interface to flat surfaces, while the 32mm valve offers simple flow control within the circuit. The Geka fittings, known for their quick, tool‑free assembly and reliable seals, include a ¾” BSP connector and a 19mm barb compatible with MDPE barbed ends. The brass construction of Geka connectors adds corrosion resistance and long‑term durability in harsh environments, and rubber seals help create a tight seal when mated correctly.

Key specifications to note include a maximum operating pressure of PN10 (10 bar). This rating complements MDPE piping systems designed for typical domestic water and irrigation pressures, helping maintain integrity under varied weather and load conditions. MDPE fittings are suitable for connecting MDPE pipes in outdoor and indoor settings, and their threaded BSP connections align with standard distribution and service components. The kit thus supports straightforward expansion or temporary/isolation arrangements without requiring bespoke fabrications.

Who this is for: tradespeople, installers and handy property owners who want a cohesive, ready‑to‑use kit for 32mm MDPE piping. It’s particularly useful where a wall‑mounted inlet needs isolating, or where a quick‑connect solution is beneficial for irrigation runs, garden tap lines or service connections in light industrial settings.

Practical tips for installation and use:

  • Inspect pipe ends for clean, square cuts; remove burrs before fitting.
  • Tighten compression connections to the manufacturer’s recommended torque; avoid over‑tightening.
  • Verify BSP threads match existing components to prevent cross‑threading.
  • Test the completed run at a moderate pressure to check for leaks before putting into service.
  • Store fittings upright and avoid exposure to extreme temperatures when not in use.
Akor
MDPE Pipe Fittings

A compact MDPE connection kit for 32mm piping, combining a wall flange, a 32mm MDPE valve and two Geka-type fittings in one practical package. Designed for water supply, irrigation and light industrial piping, it delivers robust, corrosion‑resistant joints with straightforward compression connections.

  • MDPE Wall Flange 32mm – ¾” BSP (MDPEWF32-34BSPF)
  • MDPE Valve 32mm (MDPEVALVE32)
  • Geka Type Fitting ¾” BSP (GK34BSPM)
  • Geka Type Fitting 19mm Barb (GK19MM)

The kit uses MDPE fittings that are engineered for durability, flexibility and chemical resistance, making them a common choice for domestic water and irrigation projects. The wall flange provides a secure interface to flat surfaces, while the 32mm valve offers simple flow control within the circuit. The Geka fittings, known for their quick, tool‑free assembly and reliable seals, include a ¾” BSP connector and a 19mm barb compatible with MDPE barbed ends. The brass construction of Geka connectors adds corrosion resistance and long‑term durability in harsh environments, and rubber seals help create a tight seal when mated correctly.

Key specifications to note include a maximum operating pressure of PN10 (10 bar). This rating complements MDPE piping systems designed for typical domestic water and irrigation pressures, helping maintain integrity under varied weather and load conditions. MDPE fittings are suitable for connecting MDPE pipes in outdoor and indoor settings, and their threaded BSP connections align with standard distribution and service components. The kit thus supports straightforward expansion or temporary/isolation arrangements without requiring bespoke fabrications.

Who this is for: tradespeople, installers and handy property owners who want a cohesive, ready‑to‑use kit for 32mm MDPE piping. It’s particularly useful where a wall‑mounted inlet needs isolating, or where a quick‑connect solution is beneficial for irrigation runs, garden tap lines or service connections in light industrial settings.

Practical tips for installation and use:

  • Inspect pipe ends for clean, square cuts; remove burrs before fitting.
  • Tighten compression connections to the manufacturer’s recommended torque; avoid over‑tightening.
  • Verify BSP threads match existing components to prevent cross‑threading.
  • Test the completed run at a moderate pressure to check for leaks before putting into service.
  • Store fittings upright and avoid exposure to extreme temperatures when not in use.
Akor
MDPE Pipe Fittings
Ex VAT Inc VAT
CALL US ON
01625 322269
Call us on 01625 322269
Trustpilot
1 16
£21.00
Akor

Wall Flange Kit 32mm MDPE + 32mm MDPE Valve + 19mm Barbed Geka Set
Trustpilot

We're here to help Monday to Friday 8:00 - 5:00

Live Chat or call us on 01625 322269

Delivery

Delivery charges will vary depending on your location.

To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode

We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.

Share information about this product with your customers.

A compact MDPE connection kit for 32mm piping, combining a wall flange, a 32mm MDPE valve and two Geka-type fittings in one practical package. Designed for water supply, irrigation and light industrial piping, it delivers robust, corrosion‑resistant joints with straightforward compression connections.

  • MDPE Wall Flange 32mm – ¾” BSP (MDPEWF32-34BSPF)
  • MDPE Valve 32mm (MDPEVALVE32)
  • Geka Type Fitting ¾” BSP (GK34BSPM)
  • Geka Type Fitting 19mm Barb (GK19MM)

The kit uses MDPE fittings that are engineered for durability, flexibility and chemical resistance, making them a common choice for domestic water and irrigation projects. The wall flange provides a secure interface to flat surfaces, while the 32mm valve offers simple flow control within the circuit. The Geka fittings, known for their quick, tool‑free assembly and reliable seals, include a ¾” BSP connector and a 19mm barb compatible with MDPE barbed ends. The brass construction of Geka connectors adds corrosion resistance and long‑term durability in harsh environments, and rubber seals help create a tight seal when mated correctly.

Key specifications to note include a maximum operating pressure of PN10 (10 bar). This rating complements MDPE piping systems designed for typical domestic water and irrigation pressures, helping maintain integrity under varied weather and load conditions. MDPE fittings are suitable for connecting MDPE pipes in outdoor and indoor settings, and their threaded BSP connections align with standard distribution and service components. The kit thus supports straightforward expansion or temporary/isolation arrangements without requiring bespoke fabrications.

Who this is for: tradespeople, installers and handy property owners who want a cohesive, ready‑to‑use kit for 32mm MDPE piping. It’s particularly useful where a wall‑mounted inlet needs isolating, or where a quick‑connect solution is beneficial for irrigation runs, garden tap lines or service connections in light industrial settings.

Practical tips for installation and use:

  • Inspect pipe ends for clean, square cuts; remove burrs before fitting.
  • Tighten compression connections to the manufacturer’s recommended torque; avoid over‑tightening.
  • Verify BSP threads match existing components to prevent cross‑threading.
  • Test the completed run at a moderate pressure to check for leaks before putting into service.
  • Store fittings upright and avoid exposure to extreme temperatures when not in use.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Have a question?

If you have any questions about our products or would like to learn more about our shipping options please feel free to contact one of our team today.

Contact Us
Wall Flange Kit 32mm MDPE + 32mm MDPE Valve + 19mm Barbed Geka Set - Armstrong Cheshire
Akor

Wall Flange Kit 32mm MDPE + 32mm MDPE Valve + 19mm Barbed Geka Set

£21.00

A compact MDPE connection kit for 32mm piping, combining a wall flange, a 32mm MDPE valve and two Geka-type fittings in one practical package. Designed for water supply, irrigation and light industrial piping, it delivers robust, corrosion‑resistant joints with straightforward compression connections.

  • MDPE Wall Flange 32mm – ¾” BSP (MDPEWF32-34BSPF)
  • MDPE Valve 32mm (MDPEVALVE32)
  • Geka Type Fitting ¾” BSP (GK34BSPM)
  • Geka Type Fitting 19mm Barb (GK19MM)

The kit uses MDPE fittings that are engineered for durability, flexibility and chemical resistance, making them a common choice for domestic water and irrigation projects. The wall flange provides a secure interface to flat surfaces, while the 32mm valve offers simple flow control within the circuit. The Geka fittings, known for their quick, tool‑free assembly and reliable seals, include a ¾” BSP connector and a 19mm barb compatible with MDPE barbed ends. The brass construction of Geka connectors adds corrosion resistance and long‑term durability in harsh environments, and rubber seals help create a tight seal when mated correctly.

Key specifications to note include a maximum operating pressure of PN10 (10 bar). This rating complements MDPE piping systems designed for typical domestic water and irrigation pressures, helping maintain integrity under varied weather and load conditions. MDPE fittings are suitable for connecting MDPE pipes in outdoor and indoor settings, and their threaded BSP connections align with standard distribution and service components. The kit thus supports straightforward expansion or temporary/isolation arrangements without requiring bespoke fabrications.

Who this is for: tradespeople, installers and handy property owners who want a cohesive, ready‑to‑use kit for 32mm MDPE piping. It’s particularly useful where a wall‑mounted inlet needs isolating, or where a quick‑connect solution is beneficial for irrigation runs, garden tap lines or service connections in light industrial settings.

Practical tips for installation and use:

  • Inspect pipe ends for clean, square cuts; remove burrs before fitting.
  • Tighten compression connections to the manufacturer’s recommended torque; avoid over‑tightening.
  • Verify BSP threads match existing components to prevent cross‑threading.
  • Test the completed run at a moderate pressure to check for leaks before putting into service.
  • Store fittings upright and avoid exposure to extreme temperatures when not in use.
View product