Wall Flange Kit 32mm MDPE + 32mm MDPE Valve is a compact, surface‑mounted isolation and connection solution for 32mm MDPE piping. It’s aimed at plumbers, builders and site foremen who need a tidy, leak‑tight connection point with straightforward on‑site assembly.

  • 1 x MDPE Wall Flange 32mm – ¾” BSP (MDPEWF32-34BSPF)
  • 1 x MDPE Valve 32mm (MDPEVALVE32)

MDPE fittings are designed for MDPE piping systems, offering durability, flexibility and chemical resistance. The wall flange provides a robust method to mount the pipe entry to flat surfaces, while the accompanying MDPE valve gives a straightforward means to isolate the line. The kit uses threaded compression connections to create a seal without the need for specialist tooling, simplifying on‑site installation and reducing labour time. Rated to PN10, the fittings are designed to withstand up to 10 bar (about 145 psi) under suitable conditions, making them suitable for typical domestic and light commercial water and irrigation circuits.

Key benefits include a compact footprint, integrated mounting, and a dedicated shut‑off point in the MDPE run. By combining a wall flange with a 32mm MDPE valve, the kit helps cut down parts on site and streamlines maintenance access in service areas or external installations. The MDPE material is chosen for its corrosion resistance and compatibility with potable water networks, while the ¾” BSP thread on the wall flange aligns with common service connections used in UK installations.

Important note: This kit is not sold with PTFE Tape. Tape will need to be purchased separately.

Who this is for: tradespeople installing MDPE water mains, irrigation mains, or process lines where an accessible shut‑off and surface connection are advantageous. How it compares: as a dedicated 32mm MDPE package, it provides a matched flange and valve in a single kit, reducing guesswork and compatibility issues compared with sourcing each component separately. Practical tips: check pipe ends for square cuts and clean seating surfaces before assembly, and ensure the wall surface is suitable for securing the flange to achieve a flush, neat finish on site.

Akor
MDPE Pipe Fittings

Wall Flange Kit 32mm MDPE + 32mm MDPE Valve is a compact, surface‑mounted isolation and connection solution for 32mm MDPE piping. It’s aimed at plumbers, builders and site foremen who need a tidy, leak‑tight connection point with straightforward on‑site assembly.

  • 1 x MDPE Wall Flange 32mm – ¾” BSP (MDPEWF32-34BSPF)
  • 1 x MDPE Valve 32mm (MDPEVALVE32)

MDPE fittings are designed for MDPE piping systems, offering durability, flexibility and chemical resistance. The wall flange provides a robust method to mount the pipe entry to flat surfaces, while the accompanying MDPE valve gives a straightforward means to isolate the line. The kit uses threaded compression connections to create a seal without the need for specialist tooling, simplifying on‑site installation and reducing labour time. Rated to PN10, the fittings are designed to withstand up to 10 bar (about 145 psi) under suitable conditions, making them suitable for typical domestic and light commercial water and irrigation circuits.

Key benefits include a compact footprint, integrated mounting, and a dedicated shut‑off point in the MDPE run. By combining a wall flange with a 32mm MDPE valve, the kit helps cut down parts on site and streamlines maintenance access in service areas or external installations. The MDPE material is chosen for its corrosion resistance and compatibility with potable water networks, while the ¾” BSP thread on the wall flange aligns with common service connections used in UK installations.

Important note: This kit is not sold with PTFE Tape. Tape will need to be purchased separately.

Who this is for: tradespeople installing MDPE water mains, irrigation mains, or process lines where an accessible shut‑off and surface connection are advantageous. How it compares: as a dedicated 32mm MDPE package, it provides a matched flange and valve in a single kit, reducing guesswork and compatibility issues compared with sourcing each component separately. Practical tips: check pipe ends for square cuts and clean seating surfaces before assembly, and ensure the wall surface is suitable for securing the flange to achieve a flush, neat finish on site.

Akor
MDPE Pipe Fittings
Ex VAT Inc VAT
CALL US ON
01625 322269
Call us on 01625 322269
Trustpilot
1 7
£11.00
Akor

Wall Flange Kit 32mm MDPE + 32mm MDPE Valve
Trustpilot

We're here to help Monday to Friday 8:00 - 5:00

Live Chat or call us on 01625 322269

Delivery

Delivery charges will vary depending on your location.

To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode

We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.

Share information about this product with your customers.

Wall Flange Kit 32mm MDPE + 32mm MDPE Valve is a compact, surface‑mounted isolation and connection solution for 32mm MDPE piping. It’s aimed at plumbers, builders and site foremen who need a tidy, leak‑tight connection point with straightforward on‑site assembly.

  • 1 x MDPE Wall Flange 32mm – ¾” BSP (MDPEWF32-34BSPF)
  • 1 x MDPE Valve 32mm (MDPEVALVE32)

MDPE fittings are designed for MDPE piping systems, offering durability, flexibility and chemical resistance. The wall flange provides a robust method to mount the pipe entry to flat surfaces, while the accompanying MDPE valve gives a straightforward means to isolate the line. The kit uses threaded compression connections to create a seal without the need for specialist tooling, simplifying on‑site installation and reducing labour time. Rated to PN10, the fittings are designed to withstand up to 10 bar (about 145 psi) under suitable conditions, making them suitable for typical domestic and light commercial water and irrigation circuits.

Key benefits include a compact footprint, integrated mounting, and a dedicated shut‑off point in the MDPE run. By combining a wall flange with a 32mm MDPE valve, the kit helps cut down parts on site and streamlines maintenance access in service areas or external installations. The MDPE material is chosen for its corrosion resistance and compatibility with potable water networks, while the ¾” BSP thread on the wall flange aligns with common service connections used in UK installations.

Important note: This kit is not sold with PTFE Tape. Tape will need to be purchased separately.

Who this is for: tradespeople installing MDPE water mains, irrigation mains, or process lines where an accessible shut‑off and surface connection are advantageous. How it compares: as a dedicated 32mm MDPE package, it provides a matched flange and valve in a single kit, reducing guesswork and compatibility issues compared with sourcing each component separately. Practical tips: check pipe ends for square cuts and clean seating surfaces before assembly, and ensure the wall surface is suitable for securing the flange to achieve a flush, neat finish on site.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Have a question?

If you have any questions about our products or would like to learn more about our shipping options please feel free to contact one of our team today.

Contact Us
Wall Flange Kit 32mm MDPE + 32mm MDPE Valve - Armstrong Cheshire
Akor

Wall Flange Kit 32mm MDPE + 32mm MDPE Valve

£11.00

Wall Flange Kit 32mm MDPE + 32mm MDPE Valve is a compact, surface‑mounted isolation and connection solution for 32mm MDPE piping. It’s aimed at plumbers, builders and site foremen who need a tidy, leak‑tight connection point with straightforward on‑site assembly.

  • 1 x MDPE Wall Flange 32mm – ¾” BSP (MDPEWF32-34BSPF)
  • 1 x MDPE Valve 32mm (MDPEVALVE32)

MDPE fittings are designed for MDPE piping systems, offering durability, flexibility and chemical resistance. The wall flange provides a robust method to mount the pipe entry to flat surfaces, while the accompanying MDPE valve gives a straightforward means to isolate the line. The kit uses threaded compression connections to create a seal without the need for specialist tooling, simplifying on‑site installation and reducing labour time. Rated to PN10, the fittings are designed to withstand up to 10 bar (about 145 psi) under suitable conditions, making them suitable for typical domestic and light commercial water and irrigation circuits.

Key benefits include a compact footprint, integrated mounting, and a dedicated shut‑off point in the MDPE run. By combining a wall flange with a 32mm MDPE valve, the kit helps cut down parts on site and streamlines maintenance access in service areas or external installations. The MDPE material is chosen for its corrosion resistance and compatibility with potable water networks, while the ¾” BSP thread on the wall flange aligns with common service connections used in UK installations.

Important note: This kit is not sold with PTFE Tape. Tape will need to be purchased separately.

Who this is for: tradespeople installing MDPE water mains, irrigation mains, or process lines where an accessible shut‑off and surface connection are advantageous. How it compares: as a dedicated 32mm MDPE package, it provides a matched flange and valve in a single kit, reducing guesswork and compatibility issues compared with sourcing each component separately. Practical tips: check pipe ends for square cuts and clean seating surfaces before assembly, and ensure the wall surface is suitable for securing the flange to achieve a flush, neat finish on site.

View product