Wall Flange Kit 32mm MDPE + 3/4" Camlock Type B+E is a practical, ready-made connection set for MDPE piping, designed for tradespeople needing to mount pipework to a flat surface and link quick-connect hoses or pipes. In the box
  • 1 x MDPE Wall Flange 32mm – ¾” BSP (MDPEWF32-34BSPF)
  • 1 x Camlock Type B ¾” (CAMTB34BSPM)
  • 1 x Camlock Type E ¾” (CAMTE34)

Important: PTFE tape is not supplied with this kit and will need to be purchased separately if required by your installation.

Key features and benefits
  • MDPE PN10 rating tolerates up to 10 bar (approximately 145 psi), making it suitable for common water supply and irrigation scenarios and compatible with typical house-building pressures.
  • 32mm MDPE to ¾" BSP connection provides a straightforward pathway fromMDPE pipework to threaded fittings, enabling reliable seals without specialist equipment.
  • Compression-type MDPE fittings offer a leak-tight seal with minimal tooling, helping tradespeople complete tasks quickly on-site.
  • Camlock Type B and Type E fittings enable rapid, secure connections and disconnections. Type B is a female coupler with a ¾" BSP thread, and Type E is a male adapter with a hose shank, both sized to the same ¾" standard.
  • Material considerations – MDPE components provide chemical resistance and durability in external and indoor environments; Camlocks are formed from polypropylene, which is generally suitable for a wide range of fluids but should be validated for your specific application.
  • Designed for wall integration – the wall flange enables stable pipe termination to flat surfaces, improving installation neatness and system integrity.
Typical applications and practical notes
  • Water supply lines from external or internal pipes to fixed equipment or hoses on agricultural, domestic, or light industrial sites.
  • Irrigation systems requiring quick-connect camlock couplings for frequent hose changes or seasonal setups.
  • Temporary water transfer or load-out points where rapid assembly and disassembly are beneficial.
Tips for installation

Before assembly, clean pipe ends and ensure the 32mm MDPE and ¾" BSP threads are free from debris. Assemble the MDPE wall flange to the pipe, then fit the Camlock Type B and Type E components as required, tightening to the manufacturers’ guidelines for compression fittings. After assembly, test the line under system pressure and check for leaks. Confirm that polypropylene camlock material is compatible with the fluids being conveyed.

Akor
MDPE Pipe Fittings
Wall Flange Kit 32mm MDPE + 3/4" Camlock Type B+E is a practical, ready-made connection set for MDPE piping, designed for tradespeople needing to mount pipework to a flat surface and link quick-connect hoses or pipes. In the box
  • 1 x MDPE Wall Flange 32mm – ¾” BSP (MDPEWF32-34BSPF)
  • 1 x Camlock Type B ¾” (CAMTB34BSPM)
  • 1 x Camlock Type E ¾” (CAMTE34)

Important: PTFE tape is not supplied with this kit and will need to be purchased separately if required by your installation.

Key features and benefits
  • MDPE PN10 rating tolerates up to 10 bar (approximately 145 psi), making it suitable for common water supply and irrigation scenarios and compatible with typical house-building pressures.
  • 32mm MDPE to ¾" BSP connection provides a straightforward pathway fromMDPE pipework to threaded fittings, enabling reliable seals without specialist equipment.
  • Compression-type MDPE fittings offer a leak-tight seal with minimal tooling, helping tradespeople complete tasks quickly on-site.
  • Camlock Type B and Type E fittings enable rapid, secure connections and disconnections. Type B is a female coupler with a ¾" BSP thread, and Type E is a male adapter with a hose shank, both sized to the same ¾" standard.
  • Material considerations – MDPE components provide chemical resistance and durability in external and indoor environments; Camlocks are formed from polypropylene, which is generally suitable for a wide range of fluids but should be validated for your specific application.
  • Designed for wall integration – the wall flange enables stable pipe termination to flat surfaces, improving installation neatness and system integrity.
Typical applications and practical notes
  • Water supply lines from external or internal pipes to fixed equipment or hoses on agricultural, domestic, or light industrial sites.
  • Irrigation systems requiring quick-connect camlock couplings for frequent hose changes or seasonal setups.
  • Temporary water transfer or load-out points where rapid assembly and disassembly are beneficial.
Tips for installation

Before assembly, clean pipe ends and ensure the 32mm MDPE and ¾" BSP threads are free from debris. Assemble the MDPE wall flange to the pipe, then fit the Camlock Type B and Type E components as required, tightening to the manufacturers’ guidelines for compression fittings. After assembly, test the line under system pressure and check for leaks. Confirm that polypropylene camlock material is compatible with the fluids being conveyed.

Akor
MDPE Pipe Fittings
Ex VAT Inc VAT
CALL US ON
01625 322269
Call us on 01625 322269
Trustpilot
1 7
£10.00
Akor

Wall Flange Kit 32mm MDPE + 3/4" Camlock Type B+E
Trustpilot

We're here to help Monday to Friday 8:00 - 5:00

Live Chat or call us on 01625 322269

Delivery

Delivery charges will vary depending on your location.

To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode

We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.

Share information about this product with your customers.

Wall Flange Kit 32mm MDPE + 3/4" Camlock Type B+E is a practical, ready-made connection set for MDPE piping, designed for tradespeople needing to mount pipework to a flat surface and link quick-connect hoses or pipes. In the box
  • 1 x MDPE Wall Flange 32mm – ¾” BSP (MDPEWF32-34BSPF)
  • 1 x Camlock Type B ¾” (CAMTB34BSPM)
  • 1 x Camlock Type E ¾” (CAMTE34)

Important: PTFE tape is not supplied with this kit and will need to be purchased separately if required by your installation.

Key features and benefits
  • MDPE PN10 rating tolerates up to 10 bar (approximately 145 psi), making it suitable for common water supply and irrigation scenarios and compatible with typical house-building pressures.
  • 32mm MDPE to ¾" BSP connection provides a straightforward pathway fromMDPE pipework to threaded fittings, enabling reliable seals without specialist equipment.
  • Compression-type MDPE fittings offer a leak-tight seal with minimal tooling, helping tradespeople complete tasks quickly on-site.
  • Camlock Type B and Type E fittings enable rapid, secure connections and disconnections. Type B is a female coupler with a ¾" BSP thread, and Type E is a male adapter with a hose shank, both sized to the same ¾" standard.
  • Material considerations – MDPE components provide chemical resistance and durability in external and indoor environments; Camlocks are formed from polypropylene, which is generally suitable for a wide range of fluids but should be validated for your specific application.
  • Designed for wall integration – the wall flange enables stable pipe termination to flat surfaces, improving installation neatness and system integrity.
Typical applications and practical notes
  • Water supply lines from external or internal pipes to fixed equipment or hoses on agricultural, domestic, or light industrial sites.
  • Irrigation systems requiring quick-connect camlock couplings for frequent hose changes or seasonal setups.
  • Temporary water transfer or load-out points where rapid assembly and disassembly are beneficial.
Tips for installation

Before assembly, clean pipe ends and ensure the 32mm MDPE and ¾" BSP threads are free from debris. Assemble the MDPE wall flange to the pipe, then fit the Camlock Type B and Type E components as required, tightening to the manufacturers’ guidelines for compression fittings. After assembly, test the line under system pressure and check for leaks. Confirm that polypropylene camlock material is compatible with the fluids being conveyed.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Have a question?

If you have any questions about our products or would like to learn more about our shipping options please feel free to contact one of our team today.

Contact Us
Wall Flange Kit 32mm MDPE + 3/4" Camlock Type B+E - Armstrong Cheshire
Akor

Wall Flange Kit 32mm MDPE + 3/4" Camlock Type B+E

£10.00
Wall Flange Kit 32mm MDPE + 3/4" Camlock Type B+E is a practical, ready-made connection set for MDPE piping, designed for tradespeople needing to mount pipework to a flat surface and link quick-connect hoses or pipes. In the box
  • 1 x MDPE Wall Flange 32mm – ¾” BSP (MDPEWF32-34BSPF)
  • 1 x Camlock Type B ¾” (CAMTB34BSPM)
  • 1 x Camlock Type E ¾” (CAMTE34)

Important: PTFE tape is not supplied with this kit and will need to be purchased separately if required by your installation.

Key features and benefits
  • MDPE PN10 rating tolerates up to 10 bar (approximately 145 psi), making it suitable for common water supply and irrigation scenarios and compatible with typical house-building pressures.
  • 32mm MDPE to ¾" BSP connection provides a straightforward pathway fromMDPE pipework to threaded fittings, enabling reliable seals without specialist equipment.
  • Compression-type MDPE fittings offer a leak-tight seal with minimal tooling, helping tradespeople complete tasks quickly on-site.
  • Camlock Type B and Type E fittings enable rapid, secure connections and disconnections. Type B is a female coupler with a ¾" BSP thread, and Type E is a male adapter with a hose shank, both sized to the same ¾" standard.
  • Material considerations – MDPE components provide chemical resistance and durability in external and indoor environments; Camlocks are formed from polypropylene, which is generally suitable for a wide range of fluids but should be validated for your specific application.
  • Designed for wall integration – the wall flange enables stable pipe termination to flat surfaces, improving installation neatness and system integrity.
Typical applications and practical notes
  • Water supply lines from external or internal pipes to fixed equipment or hoses on agricultural, domestic, or light industrial sites.
  • Irrigation systems requiring quick-connect camlock couplings for frequent hose changes or seasonal setups.
  • Temporary water transfer or load-out points where rapid assembly and disassembly are beneficial.
Tips for installation

Before assembly, clean pipe ends and ensure the 32mm MDPE and ¾" BSP threads are free from debris. Assemble the MDPE wall flange to the pipe, then fit the Camlock Type B and Type E components as required, tightening to the manufacturers’ guidelines for compression fittings. After assembly, test the line under system pressure and check for leaks. Confirm that polypropylene camlock material is compatible with the fluids being conveyed.

View product