Wall Flange Kit 32mm MDPE + 3/4" Camlock Type B is a compact, ready-to-install solution for MDPE pipework, aimed at plumbers, builders and tradespeople installing wall terminations in water supply and irrigation systems.

  • MDPE Wall Flange 32mm – ¾" BSP (MDPEWF32-34BSPF)
  • Camlock Type B ¾" (CAMTB34BSPM)

MDPE fittings are known for durability, flexibility and chemical resistance. This kit uses a PN10 MDPE configuration, engineered to withstand up to 10 bar (approximately 145 psi) under typical operating conditions, making it suitable for domestic and light commercial applications. The wall flange provides a secure connection to a flat surface, helping to terminate pipework neatly while maintaining a reliable seal. MDPE compression connections are designed to achieve a leak‑tight fit without requiring specialist tooling, which can save time on site.

The Camlock Type B included in this kit is a quick-connect assembly featuring a female camlock coupler and a ¾" BSP male thread. Camlocks (cam and groove) are commonly used for rapid changes in hose or pipe runs, offering straightforward connection and disconnection and a secure seal when engaged. The camlock components in this kit are made from polypropylene; it’s essential to confirm polypropylene is appropriate for your media, temperature and chemical exposure before use.

Key considerations and practical use tips:

  • Applications: ideal for wall terminations in water supply lines, garden irrigation, and light industrial piping where a temporary or fast connection is beneficial.
  • Sealing: the MDPE compression connection aims for a leak‑free seal; if BSP threads are used in your setup, PTFE tape may be required and is not included with this kit.
  • Compatibility: verify 32mm MDPE pipe size and ¾" BSP threading in both the wall flange and the Camlock to ensure a proper fit. Confirm the media and environment suit polypropylene components.
  • Maintenance: MDPE is resistant to many chemicals and weather exposure, which helps extend service intervals and reduce maintenance needs.

Note: PTFE tape is not supplied with this kit and should be sourced separately if needed for BSP threaded connections.

Akor
MDPE Pipe Fittings

Wall Flange Kit 32mm MDPE + 3/4" Camlock Type B is a compact, ready-to-install solution for MDPE pipework, aimed at plumbers, builders and tradespeople installing wall terminations in water supply and irrigation systems.

  • MDPE Wall Flange 32mm – ¾" BSP (MDPEWF32-34BSPF)
  • Camlock Type B ¾" (CAMTB34BSPM)

MDPE fittings are known for durability, flexibility and chemical resistance. This kit uses a PN10 MDPE configuration, engineered to withstand up to 10 bar (approximately 145 psi) under typical operating conditions, making it suitable for domestic and light commercial applications. The wall flange provides a secure connection to a flat surface, helping to terminate pipework neatly while maintaining a reliable seal. MDPE compression connections are designed to achieve a leak‑tight fit without requiring specialist tooling, which can save time on site.

The Camlock Type B included in this kit is a quick-connect assembly featuring a female camlock coupler and a ¾" BSP male thread. Camlocks (cam and groove) are commonly used for rapid changes in hose or pipe runs, offering straightforward connection and disconnection and a secure seal when engaged. The camlock components in this kit are made from polypropylene; it’s essential to confirm polypropylene is appropriate for your media, temperature and chemical exposure before use.

Key considerations and practical use tips:

  • Applications: ideal for wall terminations in water supply lines, garden irrigation, and light industrial piping where a temporary or fast connection is beneficial.
  • Sealing: the MDPE compression connection aims for a leak‑free seal; if BSP threads are used in your setup, PTFE tape may be required and is not included with this kit.
  • Compatibility: verify 32mm MDPE pipe size and ¾" BSP threading in both the wall flange and the Camlock to ensure a proper fit. Confirm the media and environment suit polypropylene components.
  • Maintenance: MDPE is resistant to many chemicals and weather exposure, which helps extend service intervals and reduce maintenance needs.

Note: PTFE tape is not supplied with this kit and should be sourced separately if needed for BSP threaded connections.

Akor
MDPE Pipe Fittings
Ex VAT Inc VAT
CALL US ON
01625 322269
Call us on 01625 322269
Trustpilot
1 10
£9.00
Akor

Wall Flange Kit 32mm MDPE + 3/4" Camlock Type B
Trustpilot

We're here to help Monday to Friday 8:00 - 5:00

Live Chat or call us on 01625 322269

Delivery

Delivery charges will vary depending on your location.

To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode

We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.

Share information about this product with your customers.

Wall Flange Kit 32mm MDPE + 3/4" Camlock Type B is a compact, ready-to-install solution for MDPE pipework, aimed at plumbers, builders and tradespeople installing wall terminations in water supply and irrigation systems.

  • MDPE Wall Flange 32mm – ¾" BSP (MDPEWF32-34BSPF)
  • Camlock Type B ¾" (CAMTB34BSPM)

MDPE fittings are known for durability, flexibility and chemical resistance. This kit uses a PN10 MDPE configuration, engineered to withstand up to 10 bar (approximately 145 psi) under typical operating conditions, making it suitable for domestic and light commercial applications. The wall flange provides a secure connection to a flat surface, helping to terminate pipework neatly while maintaining a reliable seal. MDPE compression connections are designed to achieve a leak‑tight fit without requiring specialist tooling, which can save time on site.

The Camlock Type B included in this kit is a quick-connect assembly featuring a female camlock coupler and a ¾" BSP male thread. Camlocks (cam and groove) are commonly used for rapid changes in hose or pipe runs, offering straightforward connection and disconnection and a secure seal when engaged. The camlock components in this kit are made from polypropylene; it’s essential to confirm polypropylene is appropriate for your media, temperature and chemical exposure before use.

Key considerations and practical use tips:

  • Applications: ideal for wall terminations in water supply lines, garden irrigation, and light industrial piping where a temporary or fast connection is beneficial.
  • Sealing: the MDPE compression connection aims for a leak‑free seal; if BSP threads are used in your setup, PTFE tape may be required and is not included with this kit.
  • Compatibility: verify 32mm MDPE pipe size and ¾" BSP threading in both the wall flange and the Camlock to ensure a proper fit. Confirm the media and environment suit polypropylene components.
  • Maintenance: MDPE is resistant to many chemicals and weather exposure, which helps extend service intervals and reduce maintenance needs.

Note: PTFE tape is not supplied with this kit and should be sourced separately if needed for BSP threaded connections.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Have a question?

If you have any questions about our products or would like to learn more about our shipping options please feel free to contact one of our team today.

Contact Us
Wall Flange Kit 32mm MDPE + 3/4" Camlock Type B - Armstrong Cheshire
Akor

Wall Flange Kit 32mm MDPE + 3/4" Camlock Type B

£9.00

Wall Flange Kit 32mm MDPE + 3/4" Camlock Type B is a compact, ready-to-install solution for MDPE pipework, aimed at plumbers, builders and tradespeople installing wall terminations in water supply and irrigation systems.

  • MDPE Wall Flange 32mm – ¾" BSP (MDPEWF32-34BSPF)
  • Camlock Type B ¾" (CAMTB34BSPM)

MDPE fittings are known for durability, flexibility and chemical resistance. This kit uses a PN10 MDPE configuration, engineered to withstand up to 10 bar (approximately 145 psi) under typical operating conditions, making it suitable for domestic and light commercial applications. The wall flange provides a secure connection to a flat surface, helping to terminate pipework neatly while maintaining a reliable seal. MDPE compression connections are designed to achieve a leak‑tight fit without requiring specialist tooling, which can save time on site.

The Camlock Type B included in this kit is a quick-connect assembly featuring a female camlock coupler and a ¾" BSP male thread. Camlocks (cam and groove) are commonly used for rapid changes in hose or pipe runs, offering straightforward connection and disconnection and a secure seal when engaged. The camlock components in this kit are made from polypropylene; it’s essential to confirm polypropylene is appropriate for your media, temperature and chemical exposure before use.

Key considerations and practical use tips:

  • Applications: ideal for wall terminations in water supply lines, garden irrigation, and light industrial piping where a temporary or fast connection is beneficial.
  • Sealing: the MDPE compression connection aims for a leak‑free seal; if BSP threads are used in your setup, PTFE tape may be required and is not included with this kit.
  • Compatibility: verify 32mm MDPE pipe size and ¾" BSP threading in both the wall flange and the Camlock to ensure a proper fit. Confirm the media and environment suit polypropylene components.
  • Maintenance: MDPE is resistant to many chemicals and weather exposure, which helps extend service intervals and reduce maintenance needs.

Note: PTFE tape is not supplied with this kit and should be sourced separately if needed for BSP threaded connections.

View product