This Wall Flange Kit combines a 32mm MDPE wall flange with a 25mm brass straight joiner to provide a robust, reliable connection for MDPE piping to flat surfaces. Built for plumbers, installers and tradespeople, it streamlines tying MDPE pipework into a fixed point and linking to standard brass fittings.

The kit contains:

  • 1 x MDPE Wall Flange 32mm – ¾" BSP (MDPEWF32-34BSPF)
  • 1 x Brass Straight Joiner 25mm – ¾" BSP (BRSTR25B-34BSPM)

MDPE fittings are designed for MDPE pipework, offering durability, flexibility and chemical resistance. The 32mm wall flange is used to connect MDPE pipe to a flat surface, expanding where the system can be mounted or fed through walls. These fittings are rated to PN10, meaning they are specified to withstand up to 10 bar (approximately 145 psi) under standard conditions, providing confidence in the integrity of the pipe run. The compression-style connections seal effectively with basic tools and without the need for specialist equipment, helping keep installation costs down while maintaining a reliable joint.

The brass straight joiner provides a secure, bush-to-hose and thread-to-thread transition. One end is barbed to grip the hose pipe securely, while the other carries a ¾" BSP thread to connect with the MDPE wall flange. Brass offers good strength and corrosion resistance, making this joiner suitable for many domestic and light commercial applications where a sturdy, leak‑aware connection is required.

Please note, PTFE Tape is not included with this kit and must be purchased separately for threaded joints. When assembling, ensure the MDPE and brass threads are clean, use appropriate PTFE tape for BSP threads, and tighten joints to the manufacturer’s guidelines. After commissioning, check for leaks and re-tighten if necessary.

Ideal uses include outdoor water supply runs, garden irrigation feeds and simple transitions from MDPE pipe to brass fittings in low‑to‑moderate pressure systems. This kit offers a practical, durable solution for tradespeople seeking a straightforward, site-ready connection without bespoke tooling.

Akor
MDPE Pipe Fittings

This Wall Flange Kit combines a 32mm MDPE wall flange with a 25mm brass straight joiner to provide a robust, reliable connection for MDPE piping to flat surfaces. Built for plumbers, installers and tradespeople, it streamlines tying MDPE pipework into a fixed point and linking to standard brass fittings.

The kit contains:

  • 1 x MDPE Wall Flange 32mm – ¾" BSP (MDPEWF32-34BSPF)
  • 1 x Brass Straight Joiner 25mm – ¾" BSP (BRSTR25B-34BSPM)

MDPE fittings are designed for MDPE pipework, offering durability, flexibility and chemical resistance. The 32mm wall flange is used to connect MDPE pipe to a flat surface, expanding where the system can be mounted or fed through walls. These fittings are rated to PN10, meaning they are specified to withstand up to 10 bar (approximately 145 psi) under standard conditions, providing confidence in the integrity of the pipe run. The compression-style connections seal effectively with basic tools and without the need for specialist equipment, helping keep installation costs down while maintaining a reliable joint.

The brass straight joiner provides a secure, bush-to-hose and thread-to-thread transition. One end is barbed to grip the hose pipe securely, while the other carries a ¾" BSP thread to connect with the MDPE wall flange. Brass offers good strength and corrosion resistance, making this joiner suitable for many domestic and light commercial applications where a sturdy, leak‑aware connection is required.

Please note, PTFE Tape is not included with this kit and must be purchased separately for threaded joints. When assembling, ensure the MDPE and brass threads are clean, use appropriate PTFE tape for BSP threads, and tighten joints to the manufacturer’s guidelines. After commissioning, check for leaks and re-tighten if necessary.

Ideal uses include outdoor water supply runs, garden irrigation feeds and simple transitions from MDPE pipe to brass fittings in low‑to‑moderate pressure systems. This kit offers a practical, durable solution for tradespeople seeking a straightforward, site-ready connection without bespoke tooling.

Akor
MDPE Pipe Fittings
Ex VAT Inc VAT
CALL US ON
01625 322269
Call us on 01625 322269
Trustpilot
1 9
£8.00
Akor

Wall Flange Kit 32mm MDPE + 25mm Brass Barb
Trustpilot

We're here to help Monday to Friday 8:00 - 5:00

Live Chat or call us on 01625 322269

Delivery

Delivery charges will vary depending on your location.

To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode

We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.

Share information about this product with your customers.

This Wall Flange Kit combines a 32mm MDPE wall flange with a 25mm brass straight joiner to provide a robust, reliable connection for MDPE piping to flat surfaces. Built for plumbers, installers and tradespeople, it streamlines tying MDPE pipework into a fixed point and linking to standard brass fittings.

The kit contains:

  • 1 x MDPE Wall Flange 32mm – ¾" BSP (MDPEWF32-34BSPF)
  • 1 x Brass Straight Joiner 25mm – ¾" BSP (BRSTR25B-34BSPM)

MDPE fittings are designed for MDPE pipework, offering durability, flexibility and chemical resistance. The 32mm wall flange is used to connect MDPE pipe to a flat surface, expanding where the system can be mounted or fed through walls. These fittings are rated to PN10, meaning they are specified to withstand up to 10 bar (approximately 145 psi) under standard conditions, providing confidence in the integrity of the pipe run. The compression-style connections seal effectively with basic tools and without the need for specialist equipment, helping keep installation costs down while maintaining a reliable joint.

The brass straight joiner provides a secure, bush-to-hose and thread-to-thread transition. One end is barbed to grip the hose pipe securely, while the other carries a ¾" BSP thread to connect with the MDPE wall flange. Brass offers good strength and corrosion resistance, making this joiner suitable for many domestic and light commercial applications where a sturdy, leak‑aware connection is required.

Please note, PTFE Tape is not included with this kit and must be purchased separately for threaded joints. When assembling, ensure the MDPE and brass threads are clean, use appropriate PTFE tape for BSP threads, and tighten joints to the manufacturer’s guidelines. After commissioning, check for leaks and re-tighten if necessary.

Ideal uses include outdoor water supply runs, garden irrigation feeds and simple transitions from MDPE pipe to brass fittings in low‑to‑moderate pressure systems. This kit offers a practical, durable solution for tradespeople seeking a straightforward, site-ready connection without bespoke tooling.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Have a question?

If you have any questions about our products or would like to learn more about our shipping options please feel free to contact one of our team today.

Contact Us
Wall Flange Kit 32mm MDPE + 25mm Brass Barb - Armstrong Cheshire
Akor

Wall Flange Kit 32mm MDPE + 25mm Brass Barb

£8.00

This Wall Flange Kit combines a 32mm MDPE wall flange with a 25mm brass straight joiner to provide a robust, reliable connection for MDPE piping to flat surfaces. Built for plumbers, installers and tradespeople, it streamlines tying MDPE pipework into a fixed point and linking to standard brass fittings.

The kit contains:

  • 1 x MDPE Wall Flange 32mm – ¾" BSP (MDPEWF32-34BSPF)
  • 1 x Brass Straight Joiner 25mm – ¾" BSP (BRSTR25B-34BSPM)

MDPE fittings are designed for MDPE pipework, offering durability, flexibility and chemical resistance. The 32mm wall flange is used to connect MDPE pipe to a flat surface, expanding where the system can be mounted or fed through walls. These fittings are rated to PN10, meaning they are specified to withstand up to 10 bar (approximately 145 psi) under standard conditions, providing confidence in the integrity of the pipe run. The compression-style connections seal effectively with basic tools and without the need for specialist equipment, helping keep installation costs down while maintaining a reliable joint.

The brass straight joiner provides a secure, bush-to-hose and thread-to-thread transition. One end is barbed to grip the hose pipe securely, while the other carries a ¾" BSP thread to connect with the MDPE wall flange. Brass offers good strength and corrosion resistance, making this joiner suitable for many domestic and light commercial applications where a sturdy, leak‑aware connection is required.

Please note, PTFE Tape is not included with this kit and must be purchased separately for threaded joints. When assembling, ensure the MDPE and brass threads are clean, use appropriate PTFE tape for BSP threads, and tighten joints to the manufacturer’s guidelines. After commissioning, check for leaks and re-tighten if necessary.

Ideal uses include outdoor water supply runs, garden irrigation feeds and simple transitions from MDPE pipe to brass fittings in low‑to‑moderate pressure systems. This kit offers a practical, durable solution for tradespeople seeking a straightforward, site-ready connection without bespoke tooling.

View product