Wall Flange Kit 25mm MDPE + Lever Valve ¾” BSP
Wall Flange Kit 25mm MDPE + Lever Valve ¾” BSP is backordered and will ship as soon as it is back in stock.
Couldn't load collection availability
Delivery charges will vary depending on your location.
To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode
We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.
The Wall Flange Kit 25mm MDPE + Lever Valve ¾” BSP is a ready-to-fit connection for MDPE water pipes, aimed at tradespeople installing surface‑mounted or exterior runs. It combines a 25mm MDPE wall flange with a ¾” BSP lever valve for a neat, leak‑free join in one kit.
- MDPE Wall Flange 25mm – ¾" BSP (MDPEWF25-34BSPF)
- Lever Valve ¾" BSPM-F (BRVALVE34BSPM-F)
MDPE fittings are designed for water supply, irrigation and light industrial piping, delivering durability, flexibility and chemical resistance. The wall flange uses a compression connection, providing a tight seal without soldering or specialised tools. Rated to PN10, these fittings withstand up to 10 bar (approximately 145 psi) under standard conditions, making them suitable for domestic mains and garden installations. The materials are chosen for longevity in exposed environments, with MDPE fittings and brass components offering resistance to common waterborne chemicals and weather-induced wear.
The Brass Nickel Plated Lever Valve in the kit is built for reliability. Brass provides structural strength and corrosion resistance, while the nickel plating adds protection against wear and tarnish in outdoor or damp settings. The lever handle enables smooth, on/off control, and the BSPM‑F threads ensure a secure, leak‑tight connection to standard pipe fittings when tightened to the correct specification.
Who it’s for and where it shines:
- Garden and landscape irrigation runs needing a surface‑mounted isolation point
- External taps or irrigation risers that require a neat, wall‑mounted interface
- Domestic or light commercial installations where MDPE and BSP components meet standard fittings
Practical notes: this kit is not supplied with PTFE tape; purchase separately and apply per standard sealing practices. Ensure MDPE pipe is identified as 25mm and that the receiving valve matches ¾” BSPM‑F threading. For best results, cut pipe square, deburr edges and tighten fittings to the manufacturer’s torque guidance to minimise leaks.
Description
Description
The Wall Flange Kit 25mm MDPE + Lever Valve ¾” BSP is a ready-to-fit connection for MDPE water pipes, aimed at tradespeople installing surface‑mounted or exterior runs. It combines a 25mm MDPE wall flange with a ¾” BSP lever valve for a neat, leak‑free join in one kit.
- MDPE Wall Flange 25mm – ¾" BSP (MDPEWF25-34BSPF)
- Lever Valve ¾" BSPM-F (BRVALVE34BSPM-F)
MDPE fittings are designed for water supply, irrigation and light industrial piping, delivering durability, flexibility and chemical resistance. The wall flange uses a compression connection, providing a tight seal without soldering or specialised tools. Rated to PN10, these fittings withstand up to 10 bar (approximately 145 psi) under standard conditions, making them suitable for domestic mains and garden installations. The materials are chosen for longevity in exposed environments, with MDPE fittings and brass components offering resistance to common waterborne chemicals and weather-induced wear.
The Brass Nickel Plated Lever Valve in the kit is built for reliability. Brass provides structural strength and corrosion resistance, while the nickel plating adds protection against wear and tarnish in outdoor or damp settings. The lever handle enables smooth, on/off control, and the BSPM‑F threads ensure a secure, leak‑tight connection to standard pipe fittings when tightened to the correct specification.
Who it’s for and where it shines:
- Garden and landscape irrigation runs needing a surface‑mounted isolation point
- External taps or irrigation risers that require a neat, wall‑mounted interface
- Domestic or light commercial installations where MDPE and BSP components meet standard fittings
Practical notes: this kit is not supplied with PTFE tape; purchase separately and apply per standard sealing practices. Ensure MDPE pipe is identified as 25mm and that the receiving valve matches ¾” BSPM‑F threading. For best results, cut pipe square, deburr edges and tighten fittings to the manufacturer’s torque guidance to minimise leaks.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
