The Wall Flange Kit 25mm MDPE + Lever Valve + 32mm MDPE Elbow is a practical, ready-to-install MDPE connection bundle designed for through-wall water runs. Built for tradespeople and site-based projects, it delivers a neat, secure connection with a 25mm wall flange, a 32mm MDPE elbow and a ¾" BSP lever valve in one package.

  • 1 x MDPE Wall Flange 25mm – ¾" BSP (MDPEWF25-34BSPF)
  • 1 x MDPE Elbow ¾" BSP – 32mm (MDPEELB32-34BSPM)
  • 1 x Lever Valve ¾" BSP (BRVALVE34BSPM-F)

Key specifications and materials
MDPE fittings offer durability, flexibility and chemical resistance, suitable for domestic water supply and irrigation. The kit’s valve body is brass, nickel-plated, with a lever for reliable on/off control. The wall flange provides a tidy through-wall seal and supports simple installation without bespoke wall fittings.

  • Pn10 rating: MDPE pipe fittings are designed for up to 10 bar, ensuring integrity under typical domestic pressure and irrigation scenarios.
  • Compression connections: Threaded compression joints allow a secure seal with MDPE pipe using standard tools, without soldering or specialist flare fittings.
  • Corrosion resistance: Brass nickel plating on the lever valve enhances durability in damp or outdoor environments.

Where it excels
This kit is well-suited for feeding indoor or outdoor taps, garden irrigation headers, or short runs through walls where pipe routing must be neat and protected. It’s ideal for installations where a wall penetration needs a clean finish and a straightforward, do-it-yourself friendly assembly for tradespeople managing water supply lines.

Practical tips
Prepare MDPE pipe ends squarely and trim to length before assembly. Use the compression nuts and collars supplied and tighten to the manufacturer’s torque guidelines. Remember, PTFE tape is not included with this kit and should be sourced separately if needed for the threaded connections.

Akor
MDPE Pipe Fittings

The Wall Flange Kit 25mm MDPE + Lever Valve + 32mm MDPE Elbow is a practical, ready-to-install MDPE connection bundle designed for through-wall water runs. Built for tradespeople and site-based projects, it delivers a neat, secure connection with a 25mm wall flange, a 32mm MDPE elbow and a ¾" BSP lever valve in one package.

  • 1 x MDPE Wall Flange 25mm – ¾" BSP (MDPEWF25-34BSPF)
  • 1 x MDPE Elbow ¾" BSP – 32mm (MDPEELB32-34BSPM)
  • 1 x Lever Valve ¾" BSP (BRVALVE34BSPM-F)

Key specifications and materials
MDPE fittings offer durability, flexibility and chemical resistance, suitable for domestic water supply and irrigation. The kit’s valve body is brass, nickel-plated, with a lever for reliable on/off control. The wall flange provides a tidy through-wall seal and supports simple installation without bespoke wall fittings.

  • Pn10 rating: MDPE pipe fittings are designed for up to 10 bar, ensuring integrity under typical domestic pressure and irrigation scenarios.
  • Compression connections: Threaded compression joints allow a secure seal with MDPE pipe using standard tools, without soldering or specialist flare fittings.
  • Corrosion resistance: Brass nickel plating on the lever valve enhances durability in damp or outdoor environments.

Where it excels
This kit is well-suited for feeding indoor or outdoor taps, garden irrigation headers, or short runs through walls where pipe routing must be neat and protected. It’s ideal for installations where a wall penetration needs a clean finish and a straightforward, do-it-yourself friendly assembly for tradespeople managing water supply lines.

Practical tips
Prepare MDPE pipe ends squarely and trim to length before assembly. Use the compression nuts and collars supplied and tighten to the manufacturer’s torque guidelines. Remember, PTFE tape is not included with this kit and should be sourced separately if needed for the threaded connections.

Akor
MDPE Pipe Fittings
Ex VAT Inc VAT
CALL US ON
01625 322269
Call us on 01625 322269
Trustpilot
1 13
£11.00
Akor

Wall Flange Kit 25mm MDPE + Lever Valve + 32mm MDPE Elbow
Trustpilot

We're here to help Monday to Friday 8:00 - 5:00

Live Chat or call us on 01625 322269

Delivery

Delivery charges will vary depending on your location.

To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode

We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.

Share information about this product with your customers.

The Wall Flange Kit 25mm MDPE + Lever Valve + 32mm MDPE Elbow is a practical, ready-to-install MDPE connection bundle designed for through-wall water runs. Built for tradespeople and site-based projects, it delivers a neat, secure connection with a 25mm wall flange, a 32mm MDPE elbow and a ¾" BSP lever valve in one package.

  • 1 x MDPE Wall Flange 25mm – ¾" BSP (MDPEWF25-34BSPF)
  • 1 x MDPE Elbow ¾" BSP – 32mm (MDPEELB32-34BSPM)
  • 1 x Lever Valve ¾" BSP (BRVALVE34BSPM-F)

Key specifications and materials
MDPE fittings offer durability, flexibility and chemical resistance, suitable for domestic water supply and irrigation. The kit’s valve body is brass, nickel-plated, with a lever for reliable on/off control. The wall flange provides a tidy through-wall seal and supports simple installation without bespoke wall fittings.

  • Pn10 rating: MDPE pipe fittings are designed for up to 10 bar, ensuring integrity under typical domestic pressure and irrigation scenarios.
  • Compression connections: Threaded compression joints allow a secure seal with MDPE pipe using standard tools, without soldering or specialist flare fittings.
  • Corrosion resistance: Brass nickel plating on the lever valve enhances durability in damp or outdoor environments.

Where it excels
This kit is well-suited for feeding indoor or outdoor taps, garden irrigation headers, or short runs through walls where pipe routing must be neat and protected. It’s ideal for installations where a wall penetration needs a clean finish and a straightforward, do-it-yourself friendly assembly for tradespeople managing water supply lines.

Practical tips
Prepare MDPE pipe ends squarely and trim to length before assembly. Use the compression nuts and collars supplied and tighten to the manufacturer’s torque guidelines. Remember, PTFE tape is not included with this kit and should be sourced separately if needed for the threaded connections.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Have a question?

If you have any questions about our products or would like to learn more about our shipping options please feel free to contact one of our team today.

Contact Us
Wall Flange Kit 25mm MDPE + Lever Valve + 32mm MDPE Elbow - Armstrong Cheshire
Akor

Wall Flange Kit 25mm MDPE + Lever Valve + 32mm MDPE Elbow

£11.00

The Wall Flange Kit 25mm MDPE + Lever Valve + 32mm MDPE Elbow is a practical, ready-to-install MDPE connection bundle designed for through-wall water runs. Built for tradespeople and site-based projects, it delivers a neat, secure connection with a 25mm wall flange, a 32mm MDPE elbow and a ¾" BSP lever valve in one package.

  • 1 x MDPE Wall Flange 25mm – ¾" BSP (MDPEWF25-34BSPF)
  • 1 x MDPE Elbow ¾" BSP – 32mm (MDPEELB32-34BSPM)
  • 1 x Lever Valve ¾" BSP (BRVALVE34BSPM-F)

Key specifications and materials
MDPE fittings offer durability, flexibility and chemical resistance, suitable for domestic water supply and irrigation. The kit’s valve body is brass, nickel-plated, with a lever for reliable on/off control. The wall flange provides a tidy through-wall seal and supports simple installation without bespoke wall fittings.

  • Pn10 rating: MDPE pipe fittings are designed for up to 10 bar, ensuring integrity under typical domestic pressure and irrigation scenarios.
  • Compression connections: Threaded compression joints allow a secure seal with MDPE pipe using standard tools, without soldering or specialist flare fittings.
  • Corrosion resistance: Brass nickel plating on the lever valve enhances durability in damp or outdoor environments.

Where it excels
This kit is well-suited for feeding indoor or outdoor taps, garden irrigation headers, or short runs through walls where pipe routing must be neat and protected. It’s ideal for installations where a wall penetration needs a clean finish and a straightforward, do-it-yourself friendly assembly for tradespeople managing water supply lines.

Practical tips
Prepare MDPE pipe ends squarely and trim to length before assembly. Use the compression nuts and collars supplied and tighten to the manufacturer’s torque guidelines. Remember, PTFE tape is not included with this kit and should be sourced separately if needed for the threaded connections.

View product