The Wall Flange Kit 25mm MDPE + Lever Valve + 25mm MDPE Straight is a compact three‑piece MDPE connection set designed for easy wall terminations and straightforward pipe runs. Built for tradespeople, it delivers a secure, leak‑efficient solution for water supply and irrigation projects. What’s in the kit
  • 1 x MDPE Wall Flange 25mm – ¾” BSP (MDPEWF25-34BSPF)
  • 1 x Lever Valve ¾” BSP (BRVALVE34BSPM-F)
  • 1 x MDPE Straight Joiner ¾” BSP – 25mm (MDPESTR25-34BSPM)
MDPE fittings use compression connections, delivering a tight seal without specialist tooling. They’re designed for MDPE pipe and are suitable for water-supply and irrigation layouts. The set is PN10 capable, meaning it can withstand pressures up to 10 bar (approximately 145 psi) under typical conditions, providing confidence in performance across common domestic and light commercial applications. MDPE’s inherent flexibility and chemical resistance help minimise stress on joints and extend service life, even in challenging environments. Lever valve and wall‑flange features Brass nickel‑plated lever valve with a BSPM‑F thread combines robust materials with added wear protection. The lever offers smooth, on/off control and reliable operation in outdoor mains connections, irrigation lines, or temporary installations. The wall flange component anchors the run to a flat surface, reducing movement at terminations, while the straight joiner delivers a direct, uninterrupted 25mm MDPE connection for clean routing. Practical use and installation notes This kit is ideal for installers seeking a ready‑to‑fit MDPE solution that avoids soldering or solvent welding. It is well suited for connections to external taps, shed/feed lines, and garden irrigation circuits where a secure, compression-based seal is preferred. Note that PTFE tape is not included and should be purchased separately. For best results, cut pipe square, deburr ends, and tighten compression connections to achieve a reliable, leak‑free seal. Who it’s for Tradespeople, builders, landscapers and maintenance teams installing water supply lines, irrigation systems or temporary mains connections will benefit from the kit’s straightforward installation and durable, corrosion‑resistant components. This is a practical, purpose‑built solution that helps keep on-site work efficient and dependable.
Akor
MDPE Pipe Fittings
The Wall Flange Kit 25mm MDPE + Lever Valve + 25mm MDPE Straight is a compact three‑piece MDPE connection set designed for easy wall terminations and straightforward pipe runs. Built for tradespeople, it delivers a secure, leak‑efficient solution for water supply and irrigation projects. What’s in the kit
  • 1 x MDPE Wall Flange 25mm – ¾” BSP (MDPEWF25-34BSPF)
  • 1 x Lever Valve ¾” BSP (BRVALVE34BSPM-F)
  • 1 x MDPE Straight Joiner ¾” BSP – 25mm (MDPESTR25-34BSPM)
MDPE fittings use compression connections, delivering a tight seal without specialist tooling. They’re designed for MDPE pipe and are suitable for water-supply and irrigation layouts. The set is PN10 capable, meaning it can withstand pressures up to 10 bar (approximately 145 psi) under typical conditions, providing confidence in performance across common domestic and light commercial applications. MDPE’s inherent flexibility and chemical resistance help minimise stress on joints and extend service life, even in challenging environments. Lever valve and wall‑flange features Brass nickel‑plated lever valve with a BSPM‑F thread combines robust materials with added wear protection. The lever offers smooth, on/off control and reliable operation in outdoor mains connections, irrigation lines, or temporary installations. The wall flange component anchors the run to a flat surface, reducing movement at terminations, while the straight joiner delivers a direct, uninterrupted 25mm MDPE connection for clean routing. Practical use and installation notes This kit is ideal for installers seeking a ready‑to‑fit MDPE solution that avoids soldering or solvent welding. It is well suited for connections to external taps, shed/feed lines, and garden irrigation circuits where a secure, compression-based seal is preferred. Note that PTFE tape is not included and should be purchased separately. For best results, cut pipe square, deburr ends, and tighten compression connections to achieve a reliable, leak‑free seal. Who it’s for Tradespeople, builders, landscapers and maintenance teams installing water supply lines, irrigation systems or temporary mains connections will benefit from the kit’s straightforward installation and durable, corrosion‑resistant components. This is a practical, purpose‑built solution that helps keep on-site work efficient and dependable.
Akor
MDPE Pipe Fittings
Ex VAT Inc VAT
Log in
CALL US ON
01625 322269
Basket
Call us on 01625 322269
£11.00

Wall Flange Kit 25mm MDPE + Lever Valve + 25mm MDPE Straight


We're here to help Monday to Friday 8:00 - 5:00

Live Chat or call us on 01625 322269

Delivery

Delivery charges will vary depending on your location.

To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode

We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.

Share information about this product with your customers.

The Wall Flange Kit 25mm MDPE + Lever Valve + 25mm MDPE Straight is a compact three‑piece MDPE connection set designed for easy wall terminations and straightforward pipe runs. Built for tradespeople, it delivers a secure, leak‑efficient solution for water supply and irrigation projects. What’s in the kit
  • 1 x MDPE Wall Flange 25mm – ¾” BSP (MDPEWF25-34BSPF)
  • 1 x Lever Valve ¾” BSP (BRVALVE34BSPM-F)
  • 1 x MDPE Straight Joiner ¾” BSP – 25mm (MDPESTR25-34BSPM)
MDPE fittings use compression connections, delivering a tight seal without specialist tooling. They’re designed for MDPE pipe and are suitable for water-supply and irrigation layouts. The set is PN10 capable, meaning it can withstand pressures up to 10 bar (approximately 145 psi) under typical conditions, providing confidence in performance across common domestic and light commercial applications. MDPE’s inherent flexibility and chemical resistance help minimise stress on joints and extend service life, even in challenging environments. Lever valve and wall‑flange features Brass nickel‑plated lever valve with a BSPM‑F thread combines robust materials with added wear protection. The lever offers smooth, on/off control and reliable operation in outdoor mains connections, irrigation lines, or temporary installations. The wall flange component anchors the run to a flat surface, reducing movement at terminations, while the straight joiner delivers a direct, uninterrupted 25mm MDPE connection for clean routing. Practical use and installation notes This kit is ideal for installers seeking a ready‑to‑fit MDPE solution that avoids soldering or solvent welding. It is well suited for connections to external taps, shed/feed lines, and garden irrigation circuits where a secure, compression-based seal is preferred. Note that PTFE tape is not included and should be purchased separately. For best results, cut pipe square, deburr ends, and tighten compression connections to achieve a reliable, leak‑free seal. Who it’s for Tradespeople, builders, landscapers and maintenance teams installing water supply lines, irrigation systems or temporary mains connections will benefit from the kit’s straightforward installation and durable, corrosion‑resistant components. This is a practical, purpose‑built solution that helps keep on-site work efficient and dependable.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Have a question?

If you have any questions about our products or would like to learn more about our shipping options please feel free to contact one of our team today.

Wall Flange Kit 25mm MDPE + Lever Valve + 25mm MDPE Straight - Armstrong Cheshire
Akor

Wall Flange Kit 25mm MDPE + Lever Valve + 25mm MDPE Straight

£11.00
The Wall Flange Kit 25mm MDPE + Lever Valve + 25mm MDPE Straight is a compact three‑piece MDPE connection set designed for easy wall terminations and straightforward pipe runs. Built for tradespeople, it delivers a secure, leak‑efficient solution for water supply and irrigation projects. What’s in the kit
  • 1 x MDPE Wall Flange 25mm – ¾” BSP (MDPEWF25-34BSPF)
  • 1 x Lever Valve ¾” BSP (BRVALVE34BSPM-F)
  • 1 x MDPE Straight Joiner ¾” BSP – 25mm (MDPESTR25-34BSPM)
MDPE fittings use compression connections, delivering a tight seal without specialist tooling. They’re designed for MDPE pipe and are suitable for water-supply and irrigation layouts. The set is PN10 capable, meaning it can withstand pressures up to 10 bar (approximately 145 psi) under typical conditions, providing confidence in performance across common domestic and light commercial applications. MDPE’s inherent flexibility and chemical resistance help minimise stress on joints and extend service life, even in challenging environments. Lever valve and wall‑flange features Brass nickel‑plated lever valve with a BSPM‑F thread combines robust materials with added wear protection. The lever offers smooth, on/off control and reliable operation in outdoor mains connections, irrigation lines, or temporary installations. The wall flange component anchors the run to a flat surface, reducing movement at terminations, while the straight joiner delivers a direct, uninterrupted 25mm MDPE connection for clean routing. Practical use and installation notes This kit is ideal for installers seeking a ready‑to‑fit MDPE solution that avoids soldering or solvent welding. It is well suited for connections to external taps, shed/feed lines, and garden irrigation circuits where a secure, compression-based seal is preferred. Note that PTFE tape is not included and should be purchased separately. For best results, cut pipe square, deburr ends, and tighten compression connections to achieve a reliable, leak‑free seal. Who it’s for Tradespeople, builders, landscapers and maintenance teams installing water supply lines, irrigation systems or temporary mains connections will benefit from the kit’s straightforward installation and durable, corrosion‑resistant components. This is a practical, purpose‑built solution that helps keep on-site work efficient and dependable.
View product