Wall Flange Kit 25mm MDPE + 3/4" Camlock Type B combines a 25mm MDPE wall flange with a ¾" Camlock, giving tradespeople a compact, ready-to-fit connection for MDPE piping. It’s designed for water supply, irrigation, and light industrial runs where a surface-mounted entry and quick-connect coupling are desirable.

  • Included in the kit: 1 x MDPE Wall Flange 25mm – ¾” BSP (MDPEWF25-34BSPF) and 1 x Camlock Type B ¾” (CAMTB34BSPM).
  • MDPE characteristics: MDPE fittings are used to connect MDPE pipes and are chosen for durability, flexibility and chemical resistance. The wall flange uses compression connections to help seal without specialised tooling.
  • Pressure rating: MDPE PN10 fittings are rated to a maximum pressure of 10 bar (approximately 145 psi), supporting typical domestic and light industrial applications.
  • Camlock details: Type B camlocks have a female coupler end with a ¾" male BSP thread of the same size; they enable fast, secure connections and disconnections in fluid transfer lines. The camlock components in this kit are manufactured from polypropylene; ensure this material is suitable for the intended fluid and temperature.
  • Installation note: This kit is not supplied with PTFE tape; PTFE tape must be purchased separately if sealing at the BSP threads is required.

Use cases and practical tips: ideal for outdoor tap-offs, irrigation mains, temporary process lines or pump-fed systems where a wall entry plus quick-connect coupling saves time. Inspect thread compatibility with fittings in use and verify service conditions (pressure, temperature, chemical exposure) before installation. For any non-standard fluids or higher-temperature applications, confirm material compatibility of the polypropylene camlock and MDPE components.

Akor
MDPE Pipe Fittings

Wall Flange Kit 25mm MDPE + 3/4" Camlock Type B combines a 25mm MDPE wall flange with a ¾" Camlock, giving tradespeople a compact, ready-to-fit connection for MDPE piping. It’s designed for water supply, irrigation, and light industrial runs where a surface-mounted entry and quick-connect coupling are desirable.

  • Included in the kit: 1 x MDPE Wall Flange 25mm – ¾” BSP (MDPEWF25-34BSPF) and 1 x Camlock Type B ¾” (CAMTB34BSPM).
  • MDPE characteristics: MDPE fittings are used to connect MDPE pipes and are chosen for durability, flexibility and chemical resistance. The wall flange uses compression connections to help seal without specialised tooling.
  • Pressure rating: MDPE PN10 fittings are rated to a maximum pressure of 10 bar (approximately 145 psi), supporting typical domestic and light industrial applications.
  • Camlock details: Type B camlocks have a female coupler end with a ¾" male BSP thread of the same size; they enable fast, secure connections and disconnections in fluid transfer lines. The camlock components in this kit are manufactured from polypropylene; ensure this material is suitable for the intended fluid and temperature.
  • Installation note: This kit is not supplied with PTFE tape; PTFE tape must be purchased separately if sealing at the BSP threads is required.

Use cases and practical tips: ideal for outdoor tap-offs, irrigation mains, temporary process lines or pump-fed systems where a wall entry plus quick-connect coupling saves time. Inspect thread compatibility with fittings in use and verify service conditions (pressure, temperature, chemical exposure) before installation. For any non-standard fluids or higher-temperature applications, confirm material compatibility of the polypropylene camlock and MDPE components.

Akor
MDPE Pipe Fittings
Ex VAT Inc VAT
Log in
CALL US ON
01625 322269
Basket
Call us on 01625 322269
£8.00

Wall Flange Kit 25mm MDPE + 3/4" Camlock Type B


We're here to help Monday to Friday 8:00 - 5:00

Live Chat or call us on 01625 322269

Delivery

Delivery charges will vary depending on your location.

To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode

We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.

Share information about this product with your customers.

Wall Flange Kit 25mm MDPE + 3/4" Camlock Type B combines a 25mm MDPE wall flange with a ¾" Camlock, giving tradespeople a compact, ready-to-fit connection for MDPE piping. It’s designed for water supply, irrigation, and light industrial runs where a surface-mounted entry and quick-connect coupling are desirable.

  • Included in the kit: 1 x MDPE Wall Flange 25mm – ¾” BSP (MDPEWF25-34BSPF) and 1 x Camlock Type B ¾” (CAMTB34BSPM).
  • MDPE characteristics: MDPE fittings are used to connect MDPE pipes and are chosen for durability, flexibility and chemical resistance. The wall flange uses compression connections to help seal without specialised tooling.
  • Pressure rating: MDPE PN10 fittings are rated to a maximum pressure of 10 bar (approximately 145 psi), supporting typical domestic and light industrial applications.
  • Camlock details: Type B camlocks have a female coupler end with a ¾" male BSP thread of the same size; they enable fast, secure connections and disconnections in fluid transfer lines. The camlock components in this kit are manufactured from polypropylene; ensure this material is suitable for the intended fluid and temperature.
  • Installation note: This kit is not supplied with PTFE tape; PTFE tape must be purchased separately if sealing at the BSP threads is required.

Use cases and practical tips: ideal for outdoor tap-offs, irrigation mains, temporary process lines or pump-fed systems where a wall entry plus quick-connect coupling saves time. Inspect thread compatibility with fittings in use and verify service conditions (pressure, temperature, chemical exposure) before installation. For any non-standard fluids or higher-temperature applications, confirm material compatibility of the polypropylene camlock and MDPE components.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Have a question?

If you have any questions about our products or would like to learn more about our shipping options please feel free to contact one of our team today.

Wall Flange Kit 25mm MDPE + 3/4" Camlock Type B - Armstrong Cheshire
Akor

Wall Flange Kit 25mm MDPE + 3/4" Camlock Type B

£8.00

Wall Flange Kit 25mm MDPE + 3/4" Camlock Type B combines a 25mm MDPE wall flange with a ¾" Camlock, giving tradespeople a compact, ready-to-fit connection for MDPE piping. It’s designed for water supply, irrigation, and light industrial runs where a surface-mounted entry and quick-connect coupling are desirable.

  • Included in the kit: 1 x MDPE Wall Flange 25mm – ¾” BSP (MDPEWF25-34BSPF) and 1 x Camlock Type B ¾” (CAMTB34BSPM).
  • MDPE characteristics: MDPE fittings are used to connect MDPE pipes and are chosen for durability, flexibility and chemical resistance. The wall flange uses compression connections to help seal without specialised tooling.
  • Pressure rating: MDPE PN10 fittings are rated to a maximum pressure of 10 bar (approximately 145 psi), supporting typical domestic and light industrial applications.
  • Camlock details: Type B camlocks have a female coupler end with a ¾" male BSP thread of the same size; they enable fast, secure connections and disconnections in fluid transfer lines. The camlock components in this kit are manufactured from polypropylene; ensure this material is suitable for the intended fluid and temperature.
  • Installation note: This kit is not supplied with PTFE tape; PTFE tape must be purchased separately if sealing at the BSP threads is required.

Use cases and practical tips: ideal for outdoor tap-offs, irrigation mains, temporary process lines or pump-fed systems where a wall entry plus quick-connect coupling saves time. Inspect thread compatibility with fittings in use and verify service conditions (pressure, temperature, chemical exposure) before installation. For any non-standard fluids or higher-temperature applications, confirm material compatibility of the polypropylene camlock and MDPE components.

View product