Wall Flange Kit 25mm MDPE + 25mm MDPE Valve + ¾” BSP Geka
Wall Flange Kit 25mm MDPE + 25mm MDPE Valve + ¾” BSP Geka is backordered and will ship as soon as it is back in stock.
Couldn't load collection availability
Delivery charges will vary depending on your location.
To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode
We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.
The Wall Flange Kit 25mm MDPE + 25mm MDPE Valve + ¾” BSP Geka is a compact, ready-to-install MDPE connection set designed for tradespeople who need a reliable wall entry and flow control in water, irrigation, or light industrial piping.
- MDPE Wall Flange 25mm – ¾” BSP (MDPEWF25-34BSPF)
- MDPE Valve 25mm (MDPEVALVE25)
- Geka Type Fitting ¾” BSP (GK34BSPM)
Why this kit matters on site
- MDPE compatibility – all components are designed for 25mm MDPE pipe with threaded compression connections, enabling a tight seal without specialist tools.
- Wall entry and shut-off – the wall flange provides a stable entry point to a flat surface, while the MDPE valve gives straightforward flow control within the network.
- Pressure tolerance – MDPE PN10 fittings are engineered to withstand up to 10 bar (approximately 145 psi), suitable for typical domestic and light industrial water systems.
- Geka quick-connect – the brass Geka type fitting offers fast, tool-free assembly with a reliable seal thanks to high-quality rubber seals, simplifying servicing and upgrades.
- Durability and resistance – MDPE components resist chemical attack and provide good weathering performance, contributing to longer service intervals with lower maintenance needs.
Practical use cases
- External wall connections for garden irrigation, irrigation manifolds, or service feeds where a neat, secure surface entry is required.
- Locations where a controlled shut-off is needed close to the main supply, enabling easy isolation for maintenance.
- Temporary or semi-permanent installations in commercial or light industrial settings where rapid assembly and reliability are valued.
Tips for install and safeguarding performance
- Ensure MDPE pipe ends are clean, cut square, and deburred before inserting into compression fittings.
- Tighten compression nuts firmly by hand and finish with a suitable wrench, but avoid overtightening which may damage the fitting.
- After assembly, pressurise gradually and inspect for leaks around the wall flange, valve, and Geka coupling.
- Store components in clean, dry conditions to protect rubber seals from deterioration prior to use.
Description
Description
The Wall Flange Kit 25mm MDPE + 25mm MDPE Valve + ¾” BSP Geka is a compact, ready-to-install MDPE connection set designed for tradespeople who need a reliable wall entry and flow control in water, irrigation, or light industrial piping.
- MDPE Wall Flange 25mm – ¾” BSP (MDPEWF25-34BSPF)
- MDPE Valve 25mm (MDPEVALVE25)
- Geka Type Fitting ¾” BSP (GK34BSPM)
Why this kit matters on site
- MDPE compatibility – all components are designed for 25mm MDPE pipe with threaded compression connections, enabling a tight seal without specialist tools.
- Wall entry and shut-off – the wall flange provides a stable entry point to a flat surface, while the MDPE valve gives straightforward flow control within the network.
- Pressure tolerance – MDPE PN10 fittings are engineered to withstand up to 10 bar (approximately 145 psi), suitable for typical domestic and light industrial water systems.
- Geka quick-connect – the brass Geka type fitting offers fast, tool-free assembly with a reliable seal thanks to high-quality rubber seals, simplifying servicing and upgrades.
- Durability and resistance – MDPE components resist chemical attack and provide good weathering performance, contributing to longer service intervals with lower maintenance needs.
Practical use cases
- External wall connections for garden irrigation, irrigation manifolds, or service feeds where a neat, secure surface entry is required.
- Locations where a controlled shut-off is needed close to the main supply, enabling easy isolation for maintenance.
- Temporary or semi-permanent installations in commercial or light industrial settings where rapid assembly and reliability are valued.
Tips for install and safeguarding performance
- Ensure MDPE pipe ends are clean, cut square, and deburred before inserting into compression fittings.
- Tighten compression nuts firmly by hand and finish with a suitable wrench, but avoid overtightening which may damage the fitting.
- After assembly, pressurise gradually and inspect for leaks around the wall flange, valve, and Geka coupling.
- Store components in clean, dry conditions to protect rubber seals from deterioration prior to use.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
