The Wall Flange Kit 25mm MDPE + 25mm MDPE Valve + 19mm Brass Barb is a compact, three‑piece connection kit for MDPE piping. Built for tradespeople and installers, it delivers a straightforward, secure way to mount MDPE runs to walls and control flow in water and irrigation lines.

  • Contents: 1 x MDPE Wall Flange 25mm – ¾" BSP (MDPEWF25-34BSPF); 1 x MDPE Valve 25mm (MDPEVALVE25); 1 x Brass Straight Joiner 19mm – ¾" BSP (BRSTR19B-34BSPM).
  • Materials and rating: MDPE fittings are designed for piping applications with good chemical resistance, while the brass joiner provides robust, long‑lasting performance. The MDPE PN10 rating means the fittings are engineered to withstand up to 10 bar (about 145 psi) in typical service conditions.
  • Connection type: The kit uses compression connections on the MDPE components, which helps form a tight seal without specialised equipment, reducing installation time and material costs. The brass joiner combines a barbed hose end with a ¾" BSP thread for secure hose and threaded connections.
  • Key advantages: The wall flange helps terminate a pipe run at a flat surface, improving stability and neatness of the installation. The inline valve gives you simple flow control within the MDPE network. The barbed/ BSP combination on the brass part offers versatile attachment options for hoses and fittings.
  • Installation note: This kit is not supplied with PTFE tape. If a threaded connection requires sealing, PTFE tape will need to be purchased separately and applied per standard practice.

Use cases include domestic water supply lines, garden irrigation runs, and small‑scale industrial or service installations where MDPE piping is already in use. The kit is ideal for installers looking to streamline on‑site fittings with a ready‑to‑go wall terminal, inline flow control, and a brass barbed joiner for flexible hose connections.

Tips for best results: ensure pipe ends are clean and square, tighten BSP threads to manufacturer recommendations, and verify the compression fittings are fully seated before testing for leaks. This approach helps secure a reliable, pressure‑rated seal across typical MDPE installations.

Akor
MDPE Pipe Fittings

The Wall Flange Kit 25mm MDPE + 25mm MDPE Valve + 19mm Brass Barb is a compact, three‑piece connection kit for MDPE piping. Built for tradespeople and installers, it delivers a straightforward, secure way to mount MDPE runs to walls and control flow in water and irrigation lines.

  • Contents: 1 x MDPE Wall Flange 25mm – ¾" BSP (MDPEWF25-34BSPF); 1 x MDPE Valve 25mm (MDPEVALVE25); 1 x Brass Straight Joiner 19mm – ¾" BSP (BRSTR19B-34BSPM).
  • Materials and rating: MDPE fittings are designed for piping applications with good chemical resistance, while the brass joiner provides robust, long‑lasting performance. The MDPE PN10 rating means the fittings are engineered to withstand up to 10 bar (about 145 psi) in typical service conditions.
  • Connection type: The kit uses compression connections on the MDPE components, which helps form a tight seal without specialised equipment, reducing installation time and material costs. The brass joiner combines a barbed hose end with a ¾" BSP thread for secure hose and threaded connections.
  • Key advantages: The wall flange helps terminate a pipe run at a flat surface, improving stability and neatness of the installation. The inline valve gives you simple flow control within the MDPE network. The barbed/ BSP combination on the brass part offers versatile attachment options for hoses and fittings.
  • Installation note: This kit is not supplied with PTFE tape. If a threaded connection requires sealing, PTFE tape will need to be purchased separately and applied per standard practice.

Use cases include domestic water supply lines, garden irrigation runs, and small‑scale industrial or service installations where MDPE piping is already in use. The kit is ideal for installers looking to streamline on‑site fittings with a ready‑to‑go wall terminal, inline flow control, and a brass barbed joiner for flexible hose connections.

Tips for best results: ensure pipe ends are clean and square, tighten BSP threads to manufacturer recommendations, and verify the compression fittings are fully seated before testing for leaks. This approach helps secure a reliable, pressure‑rated seal across typical MDPE installations.

Akor
MDPE Pipe Fittings
Ex VAT Inc VAT
CALL US ON
01625 322269
Call us on 01625 322269
Trustpilot
1 10
£10.00
Akor

Wall Flange Kit 25mm MDPE + 25mm MDPE Valve + 19mm Brass Barb
Trustpilot

We're here to help Monday to Friday 8:00 - 5:00

Live Chat or call us on 01625 322269

Delivery

Delivery charges will vary depending on your location.

To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode

We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.

Share information about this product with your customers.

The Wall Flange Kit 25mm MDPE + 25mm MDPE Valve + 19mm Brass Barb is a compact, three‑piece connection kit for MDPE piping. Built for tradespeople and installers, it delivers a straightforward, secure way to mount MDPE runs to walls and control flow in water and irrigation lines.

  • Contents: 1 x MDPE Wall Flange 25mm – ¾" BSP (MDPEWF25-34BSPF); 1 x MDPE Valve 25mm (MDPEVALVE25); 1 x Brass Straight Joiner 19mm – ¾" BSP (BRSTR19B-34BSPM).
  • Materials and rating: MDPE fittings are designed for piping applications with good chemical resistance, while the brass joiner provides robust, long‑lasting performance. The MDPE PN10 rating means the fittings are engineered to withstand up to 10 bar (about 145 psi) in typical service conditions.
  • Connection type: The kit uses compression connections on the MDPE components, which helps form a tight seal without specialised equipment, reducing installation time and material costs. The brass joiner combines a barbed hose end with a ¾" BSP thread for secure hose and threaded connections.
  • Key advantages: The wall flange helps terminate a pipe run at a flat surface, improving stability and neatness of the installation. The inline valve gives you simple flow control within the MDPE network. The barbed/ BSP combination on the brass part offers versatile attachment options for hoses and fittings.
  • Installation note: This kit is not supplied with PTFE tape. If a threaded connection requires sealing, PTFE tape will need to be purchased separately and applied per standard practice.

Use cases include domestic water supply lines, garden irrigation runs, and small‑scale industrial or service installations where MDPE piping is already in use. The kit is ideal for installers looking to streamline on‑site fittings with a ready‑to‑go wall terminal, inline flow control, and a brass barbed joiner for flexible hose connections.

Tips for best results: ensure pipe ends are clean and square, tighten BSP threads to manufacturer recommendations, and verify the compression fittings are fully seated before testing for leaks. This approach helps secure a reliable, pressure‑rated seal across typical MDPE installations.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Have a question?

If you have any questions about our products or would like to learn more about our shipping options please feel free to contact one of our team today.

Contact Us
Wall Flange Kit 25mm MDPE + 25mm MDPE Valve + 19mm Brass Barb - Armstrong Cheshire
Akor

Wall Flange Kit 25mm MDPE + 25mm MDPE Valve + 19mm Brass Barb

£10.00

The Wall Flange Kit 25mm MDPE + 25mm MDPE Valve + 19mm Brass Barb is a compact, three‑piece connection kit for MDPE piping. Built for tradespeople and installers, it delivers a straightforward, secure way to mount MDPE runs to walls and control flow in water and irrigation lines.

  • Contents: 1 x MDPE Wall Flange 25mm – ¾" BSP (MDPEWF25-34BSPF); 1 x MDPE Valve 25mm (MDPEVALVE25); 1 x Brass Straight Joiner 19mm – ¾" BSP (BRSTR19B-34BSPM).
  • Materials and rating: MDPE fittings are designed for piping applications with good chemical resistance, while the brass joiner provides robust, long‑lasting performance. The MDPE PN10 rating means the fittings are engineered to withstand up to 10 bar (about 145 psi) in typical service conditions.
  • Connection type: The kit uses compression connections on the MDPE components, which helps form a tight seal without specialised equipment, reducing installation time and material costs. The brass joiner combines a barbed hose end with a ¾" BSP thread for secure hose and threaded connections.
  • Key advantages: The wall flange helps terminate a pipe run at a flat surface, improving stability and neatness of the installation. The inline valve gives you simple flow control within the MDPE network. The barbed/ BSP combination on the brass part offers versatile attachment options for hoses and fittings.
  • Installation note: This kit is not supplied with PTFE tape. If a threaded connection requires sealing, PTFE tape will need to be purchased separately and applied per standard practice.

Use cases include domestic water supply lines, garden irrigation runs, and small‑scale industrial or service installations where MDPE piping is already in use. The kit is ideal for installers looking to streamline on‑site fittings with a ready‑to‑go wall terminal, inline flow control, and a brass barbed joiner for flexible hose connections.

Tips for best results: ensure pipe ends are clean and square, tighten BSP threads to manufacturer recommendations, and verify the compression fittings are fully seated before testing for leaks. This approach helps secure a reliable, pressure‑rated seal across typical MDPE installations.

View product