Wall Flange Kit 25mm MDPE + 19mm Barbed Geka Set is a ready‑to‑fit connection pack for tradespeople needing to attach MDPE piping to walls and link quickly to hoses via Geka claw fittings. Built for water supply, irrigation and light industrial tasks, it offers a reliable, leak‑tight seal with straightforward installation.

The kit contains: 1 x MDPE Wall Flange 25mm – ¾” BSP (MDPEWF25-34BSPF); 1 x Geka Type Fitting ¾” BSP (GK34BSPM); 1 x Geka Type Fitting 19mm Barb (GK19MM). The wall flange provides a secure, flat‑surface connection for MDPE pipe, while the two Geka fittings give versatile options for appliance and hose connections on site. The fittings use a threaded compression connection to seal without the need for specialist equipment, helping to keep installation efficient and cost‑effective.

MDPE fittings are selected for durability and chemical resistance, with MDPE pipes commonly used in potable water networks, irrigation systems and industrial fluid transfer. These MDPE PN10 components are rated to withstand up to 10 bars (approximately 145 psi) under normal operating conditions, supporting a range of routine site pressures while maintaining integrity in outdoor or harsh environments. The material’s flexibility also aids ease of alignment and drainage in tight spaces.

Geka type connectors, or claw couplings, are known for quick, tool‑free assembly and a secure seal. In this kit you get two Geka fittings with a universal claw inlet design. One provides a claw inlet with a ¾” BSP outlet, and the other offers a claw inlet with a 19mm barb outlet. Brass construction on the Geka fittings offers good corrosion resistance in demanding environments, and rubber seals help achieve a watertight and airtight connection across a range of fluids.

Ideal for on‑site water supply runs, irrigation risers and temporary or semi‑permanent fluid transfer lines, this kit combines a wall‑mounted MDPE interface with flexible Geka joinery. It shortens install times, reduces the need for specialised tools and provides a robust, leak‑tight solution for compliant MDPE systems.

Akor
MDPE Pipe Fittings

Wall Flange Kit 25mm MDPE + 19mm Barbed Geka Set is a ready‑to‑fit connection pack for tradespeople needing to attach MDPE piping to walls and link quickly to hoses via Geka claw fittings. Built for water supply, irrigation and light industrial tasks, it offers a reliable, leak‑tight seal with straightforward installation.

The kit contains: 1 x MDPE Wall Flange 25mm – ¾” BSP (MDPEWF25-34BSPF); 1 x Geka Type Fitting ¾” BSP (GK34BSPM); 1 x Geka Type Fitting 19mm Barb (GK19MM). The wall flange provides a secure, flat‑surface connection for MDPE pipe, while the two Geka fittings give versatile options for appliance and hose connections on site. The fittings use a threaded compression connection to seal without the need for specialist equipment, helping to keep installation efficient and cost‑effective.

MDPE fittings are selected for durability and chemical resistance, with MDPE pipes commonly used in potable water networks, irrigation systems and industrial fluid transfer. These MDPE PN10 components are rated to withstand up to 10 bars (approximately 145 psi) under normal operating conditions, supporting a range of routine site pressures while maintaining integrity in outdoor or harsh environments. The material’s flexibility also aids ease of alignment and drainage in tight spaces.

Geka type connectors, or claw couplings, are known for quick, tool‑free assembly and a secure seal. In this kit you get two Geka fittings with a universal claw inlet design. One provides a claw inlet with a ¾” BSP outlet, and the other offers a claw inlet with a 19mm barb outlet. Brass construction on the Geka fittings offers good corrosion resistance in demanding environments, and rubber seals help achieve a watertight and airtight connection across a range of fluids.

Ideal for on‑site water supply runs, irrigation risers and temporary or semi‑permanent fluid transfer lines, this kit combines a wall‑mounted MDPE interface with flexible Geka joinery. It shortens install times, reduces the need for specialised tools and provides a robust, leak‑tight solution for compliant MDPE systems.

Akor
MDPE Pipe Fittings
Ex VAT Inc VAT
CALL US ON
01625 322269
Call us on 01625 322269
Trustpilot
1 17
£13.00
Akor

Wall Flange Kit 25mm MDPE + 19mm Barbed Geka Set
Trustpilot

We're here to help Monday to Friday 8:00 - 5:00

Live Chat or call us on 01625 322269

Delivery

Delivery charges will vary depending on your location.

To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode

We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.

Share information about this product with your customers.

Wall Flange Kit 25mm MDPE + 19mm Barbed Geka Set is a ready‑to‑fit connection pack for tradespeople needing to attach MDPE piping to walls and link quickly to hoses via Geka claw fittings. Built for water supply, irrigation and light industrial tasks, it offers a reliable, leak‑tight seal with straightforward installation.

The kit contains: 1 x MDPE Wall Flange 25mm – ¾” BSP (MDPEWF25-34BSPF); 1 x Geka Type Fitting ¾” BSP (GK34BSPM); 1 x Geka Type Fitting 19mm Barb (GK19MM). The wall flange provides a secure, flat‑surface connection for MDPE pipe, while the two Geka fittings give versatile options for appliance and hose connections on site. The fittings use a threaded compression connection to seal without the need for specialist equipment, helping to keep installation efficient and cost‑effective.

MDPE fittings are selected for durability and chemical resistance, with MDPE pipes commonly used in potable water networks, irrigation systems and industrial fluid transfer. These MDPE PN10 components are rated to withstand up to 10 bars (approximately 145 psi) under normal operating conditions, supporting a range of routine site pressures while maintaining integrity in outdoor or harsh environments. The material’s flexibility also aids ease of alignment and drainage in tight spaces.

Geka type connectors, or claw couplings, are known for quick, tool‑free assembly and a secure seal. In this kit you get two Geka fittings with a universal claw inlet design. One provides a claw inlet with a ¾” BSP outlet, and the other offers a claw inlet with a 19mm barb outlet. Brass construction on the Geka fittings offers good corrosion resistance in demanding environments, and rubber seals help achieve a watertight and airtight connection across a range of fluids.

Ideal for on‑site water supply runs, irrigation risers and temporary or semi‑permanent fluid transfer lines, this kit combines a wall‑mounted MDPE interface with flexible Geka joinery. It shortens install times, reduces the need for specialised tools and provides a robust, leak‑tight solution for compliant MDPE systems.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Have a question?

If you have any questions about our products or would like to learn more about our shipping options please feel free to contact one of our team today.

Contact Us
Wall Flange Kit 25mm MDPE + 19mm Barbed Geka Set - Armstrong Cheshire
Akor

Wall Flange Kit 25mm MDPE + 19mm Barbed Geka Set

£13.00

Wall Flange Kit 25mm MDPE + 19mm Barbed Geka Set is a ready‑to‑fit connection pack for tradespeople needing to attach MDPE piping to walls and link quickly to hoses via Geka claw fittings. Built for water supply, irrigation and light industrial tasks, it offers a reliable, leak‑tight seal with straightforward installation.

The kit contains: 1 x MDPE Wall Flange 25mm – ¾” BSP (MDPEWF25-34BSPF); 1 x Geka Type Fitting ¾” BSP (GK34BSPM); 1 x Geka Type Fitting 19mm Barb (GK19MM). The wall flange provides a secure, flat‑surface connection for MDPE pipe, while the two Geka fittings give versatile options for appliance and hose connections on site. The fittings use a threaded compression connection to seal without the need for specialist equipment, helping to keep installation efficient and cost‑effective.

MDPE fittings are selected for durability and chemical resistance, with MDPE pipes commonly used in potable water networks, irrigation systems and industrial fluid transfer. These MDPE PN10 components are rated to withstand up to 10 bars (approximately 145 psi) under normal operating conditions, supporting a range of routine site pressures while maintaining integrity in outdoor or harsh environments. The material’s flexibility also aids ease of alignment and drainage in tight spaces.

Geka type connectors, or claw couplings, are known for quick, tool‑free assembly and a secure seal. In this kit you get two Geka fittings with a universal claw inlet design. One provides a claw inlet with a ¾” BSP outlet, and the other offers a claw inlet with a 19mm barb outlet. Brass construction on the Geka fittings offers good corrosion resistance in demanding environments, and rubber seals help achieve a watertight and airtight connection across a range of fluids.

Ideal for on‑site water supply runs, irrigation risers and temporary or semi‑permanent fluid transfer lines, this kit combines a wall‑mounted MDPE interface with flexible Geka joinery. It shortens install times, reduces the need for specialised tools and provides a robust, leak‑tight solution for compliant MDPE systems.

View product