The Wall Flange Kit 20mm MDPE - Geka & In Line Valve is a ready-to-install MDPE connection set for passing 20mm piping through walls or flat surfaces. It pairs a wall flange, a Geka-style connector and an inline valve for quick, reliable control at the point of use.

Inside the kit you get:

  • 1 x MDPE Wall Flange 20mm – ½" BSP (MDPEWF20-12BSPF)
  • 1 x Geka 1/2"BSPM Connector (GK12BSPM)
  • 1 x In Line MDPE Valve 20mm (MDPEVALVE20)

MDPE fittings are designed for durability, flexibility and chemical resistance, making them a common choice for water supply, irrigation and industrial processes. This kit uses threaded compression connections to create a tight, leak‑free seal without specialist tools. The wall flange allows a neat through-wall or through-surface connection, while the inline valve provides straightforward flow control right at the point of use.

The components are sized for 20mm MDPE piping and comply with PN10 ratings, meaning the fittings are engineered to withstand up to 10 bar (about 145 psi) under typical conditions. This makes the assembly well suited to domestic and light industrial installations where a robust, pressure‑tested joint is needed. MDPE’s inherent corrosion resistance helps extend service life in challenging environments, reducing maintenance needs over time.

The Geka‑style connector included is brass, featuring a universal claw design that interlocks quickly and securely. It supports tool‑free assembly and disassembly, with rubber seals to ensure a watertight and airtight seal. This makes it practical for on‑site adjustments or relocations, and suitable for applications such as irrigation runs, water supply lines, and temporary or semi‑permanent installations.

Who this is for: tradespeople laying MDPE systems that require a through‑wall connection plus convenient flow control at the wall. It’s ideal for retrofit work where passing through masonry or cladding is needed, and for new builds where a compact, reliable 20mm MDPE solution is required. Pro tip: verify pipe length, clean the pipe ends and hand‑tighten compression connections before final assignment to ensure a clean, leak‑free result.

Akor
MDPE Pipe Fittings

The Wall Flange Kit 20mm MDPE - Geka & In Line Valve is a ready-to-install MDPE connection set for passing 20mm piping through walls or flat surfaces. It pairs a wall flange, a Geka-style connector and an inline valve for quick, reliable control at the point of use.

Inside the kit you get:

  • 1 x MDPE Wall Flange 20mm – ½" BSP (MDPEWF20-12BSPF)
  • 1 x Geka 1/2"BSPM Connector (GK12BSPM)
  • 1 x In Line MDPE Valve 20mm (MDPEVALVE20)

MDPE fittings are designed for durability, flexibility and chemical resistance, making them a common choice for water supply, irrigation and industrial processes. This kit uses threaded compression connections to create a tight, leak‑free seal without specialist tools. The wall flange allows a neat through-wall or through-surface connection, while the inline valve provides straightforward flow control right at the point of use.

The components are sized for 20mm MDPE piping and comply with PN10 ratings, meaning the fittings are engineered to withstand up to 10 bar (about 145 psi) under typical conditions. This makes the assembly well suited to domestic and light industrial installations where a robust, pressure‑tested joint is needed. MDPE’s inherent corrosion resistance helps extend service life in challenging environments, reducing maintenance needs over time.

The Geka‑style connector included is brass, featuring a universal claw design that interlocks quickly and securely. It supports tool‑free assembly and disassembly, with rubber seals to ensure a watertight and airtight seal. This makes it practical for on‑site adjustments or relocations, and suitable for applications such as irrigation runs, water supply lines, and temporary or semi‑permanent installations.

Who this is for: tradespeople laying MDPE systems that require a through‑wall connection plus convenient flow control at the wall. It’s ideal for retrofit work where passing through masonry or cladding is needed, and for new builds where a compact, reliable 20mm MDPE solution is required. Pro tip: verify pipe length, clean the pipe ends and hand‑tighten compression connections before final assignment to ensure a clean, leak‑free result.

Akor
MDPE Pipe Fittings
Ex VAT Inc VAT
CALL US ON
01625 322269
Call us on 01625 322269
Trustpilot
1 10
Akor

Wall Flange Kit 20mm MDPE - Geka & In Line Valve

£10.00

Delivery charges will vary depending on your location.

To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode

We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.

The Wall Flange Kit 20mm MDPE - Geka & In Line Valve is a ready-to-install MDPE connection set for passing 20mm piping through walls or flat surfaces. It pairs a wall flange, a Geka-style connector and an inline valve for quick, reliable control at the point of use.

Inside the kit you get:

  • 1 x MDPE Wall Flange 20mm – ½" BSP (MDPEWF20-12BSPF)
  • 1 x Geka 1/2"BSPM Connector (GK12BSPM)
  • 1 x In Line MDPE Valve 20mm (MDPEVALVE20)

MDPE fittings are designed for durability, flexibility and chemical resistance, making them a common choice for water supply, irrigation and industrial processes. This kit uses threaded compression connections to create a tight, leak‑free seal without specialist tools. The wall flange allows a neat through-wall or through-surface connection, while the inline valve provides straightforward flow control right at the point of use.

The components are sized for 20mm MDPE piping and comply with PN10 ratings, meaning the fittings are engineered to withstand up to 10 bar (about 145 psi) under typical conditions. This makes the assembly well suited to domestic and light industrial installations where a robust, pressure‑tested joint is needed. MDPE’s inherent corrosion resistance helps extend service life in challenging environments, reducing maintenance needs over time.

The Geka‑style connector included is brass, featuring a universal claw design that interlocks quickly and securely. It supports tool‑free assembly and disassembly, with rubber seals to ensure a watertight and airtight seal. This makes it practical for on‑site adjustments or relocations, and suitable for applications such as irrigation runs, water supply lines, and temporary or semi‑permanent installations.

Who this is for: tradespeople laying MDPE systems that require a through‑wall connection plus convenient flow control at the wall. It’s ideal for retrofit work where passing through masonry or cladding is needed, and for new builds where a compact, reliable 20mm MDPE solution is required. Pro tip: verify pipe length, clean the pipe ends and hand‑tighten compression connections before final assignment to ensure a clean, leak‑free result.

Description

The Wall Flange Kit 20mm MDPE - Geka & In Line Valve is a ready-to-install MDPE connection set for passing 20mm piping through walls or flat surfaces. It pairs a wall flange, a Geka-style connector and an inline valve for quick, reliable control at the point of use.

Inside the kit you get:

  • 1 x MDPE Wall Flange 20mm – ½" BSP (MDPEWF20-12BSPF)
  • 1 x Geka 1/2"BSPM Connector (GK12BSPM)
  • 1 x In Line MDPE Valve 20mm (MDPEVALVE20)

MDPE fittings are designed for durability, flexibility and chemical resistance, making them a common choice for water supply, irrigation and industrial processes. This kit uses threaded compression connections to create a tight, leak‑free seal without specialist tools. The wall flange allows a neat through-wall or through-surface connection, while the inline valve provides straightforward flow control right at the point of use.

The components are sized for 20mm MDPE piping and comply with PN10 ratings, meaning the fittings are engineered to withstand up to 10 bar (about 145 psi) under typical conditions. This makes the assembly well suited to domestic and light industrial installations where a robust, pressure‑tested joint is needed. MDPE’s inherent corrosion resistance helps extend service life in challenging environments, reducing maintenance needs over time.

The Geka‑style connector included is brass, featuring a universal claw design that interlocks quickly and securely. It supports tool‑free assembly and disassembly, with rubber seals to ensure a watertight and airtight seal. This makes it practical for on‑site adjustments or relocations, and suitable for applications such as irrigation runs, water supply lines, and temporary or semi‑permanent installations.

Who this is for: tradespeople laying MDPE systems that require a through‑wall connection plus convenient flow control at the wall. It’s ideal for retrofit work where passing through masonry or cladding is needed, and for new builds where a compact, reliable 20mm MDPE solution is required. Pro tip: verify pipe length, clean the pipe ends and hand‑tighten compression connections before final assignment to ensure a clean, leak‑free result.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Have a question?

If you have any questions about our products or would like to learn more about our shipping options please feel free to contact one of our team today.

Contact Us
Wall Flange Kit 20mm MDPE - Geka & In Line Valve - Armstrong Cheshire
Akor

Wall Flange Kit 20mm MDPE - Geka & In Line Valve

£10.00

The Wall Flange Kit 20mm MDPE - Geka & In Line Valve is a ready-to-install MDPE connection set for passing 20mm piping through walls or flat surfaces. It pairs a wall flange, a Geka-style connector and an inline valve for quick, reliable control at the point of use.

Inside the kit you get:

  • 1 x MDPE Wall Flange 20mm – ½" BSP (MDPEWF20-12BSPF)
  • 1 x Geka 1/2"BSPM Connector (GK12BSPM)
  • 1 x In Line MDPE Valve 20mm (MDPEVALVE20)

MDPE fittings are designed for durability, flexibility and chemical resistance, making them a common choice for water supply, irrigation and industrial processes. This kit uses threaded compression connections to create a tight, leak‑free seal without specialist tools. The wall flange allows a neat through-wall or through-surface connection, while the inline valve provides straightforward flow control right at the point of use.

The components are sized for 20mm MDPE piping and comply with PN10 ratings, meaning the fittings are engineered to withstand up to 10 bar (about 145 psi) under typical conditions. This makes the assembly well suited to domestic and light industrial installations where a robust, pressure‑tested joint is needed. MDPE’s inherent corrosion resistance helps extend service life in challenging environments, reducing maintenance needs over time.

The Geka‑style connector included is brass, featuring a universal claw design that interlocks quickly and securely. It supports tool‑free assembly and disassembly, with rubber seals to ensure a watertight and airtight seal. This makes it practical for on‑site adjustments or relocations, and suitable for applications such as irrigation runs, water supply lines, and temporary or semi‑permanent installations.

Who this is for: tradespeople laying MDPE systems that require a through‑wall connection plus convenient flow control at the wall. It’s ideal for retrofit work where passing through masonry or cladding is needed, and for new builds where a compact, reliable 20mm MDPE solution is required. Pro tip: verify pipe length, clean the pipe ends and hand‑tighten compression connections before final assignment to ensure a clean, leak‑free result.

View product