High-Performance Damp-Proofing Treatment for Rising Damp in Masonry Walls

Dryrod Damp-Proofing Rods are a patented, high-strength rising damp treatment developed for fast, clean, and effective installation. Each rod contains a powerful silane/siloxane formulation housed in a rigid fibre cartridge, allowing direct insertion into pre-drilled holes. Once inserted, the active ingredient diffuses deep into the wall structure, creating a permanent barrier against rising damp. BBA-approved and ideal for use in brick, stone, and mortar substrates.

Key Features & Benefits

Product Details

Application Instructions

  1. Drill Holes: Drill 12mm diameter holes at regular intervals along the mortar bed, typically 120mm apart and at the recommended height.
  2. Insert Rods: Push one Dryrod into each hole until fully recessed.
  3. Seal Holes: Plug or repoint the holes to restore the wall finish and retain treatment.
  4. Allow to Cure: The active ingredient disperses into the wall, forming a damp-proof course over the coming weeks.

Limitations

Health & Safety

Wear gloves and eye protection during installation. Wash hands after handling. Refer to the Safety Data Sheet (SDS) for full guidance on safe use.

DIY Refurb
Damp Proofing

High-Performance Damp-Proofing Treatment for Rising Damp in Masonry Walls

Dryrod Damp-Proofing Rods are a patented, high-strength rising damp treatment developed for fast, clean, and effective installation. Each rod contains a powerful silane/siloxane formulation housed in a rigid fibre cartridge, allowing direct insertion into pre-drilled holes. Once inserted, the active ingredient diffuses deep into the wall structure, creating a permanent barrier against rising damp. BBA-approved and ideal for use in brick, stone, and mortar substrates.

Key Features & Benefits

Product Details

Application Instructions

  1. Drill Holes: Drill 12mm diameter holes at regular intervals along the mortar bed, typically 120mm apart and at the recommended height.
  2. Insert Rods: Push one Dryrod into each hole until fully recessed.
  3. Seal Holes: Plug or repoint the holes to restore the wall finish and retain treatment.
  4. Allow to Cure: The active ingredient disperses into the wall, forming a damp-proof course over the coming weeks.

Limitations

Health & Safety

Wear gloves and eye protection during installation. Wash hands after handling. Refer to the Safety Data Sheet (SDS) for full guidance on safe use.

DIY Refurb
Damp Proofing
Ex VAT Inc VAT
Log in
CALL US ON
01625 322269
Basket
Call us on 01625 322269
£120.00

Safeguard Dryrod Damp-Proofing Rods - 50 Pack - For Rising Damp


We're here to help Monday to Friday 8:00 - 5:00

Live Chat or call us on 01625 322269

Delivery

Delivery charges will vary depending on your location.

To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode

We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.

Share information about this product with your customers.

High-Performance Damp-Proofing Treatment for Rising Damp in Masonry Walls

Dryrod Damp-Proofing Rods are a patented, high-strength rising damp treatment developed for fast, clean, and effective installation. Each rod contains a powerful silane/siloxane formulation housed in a rigid fibre cartridge, allowing direct insertion into pre-drilled holes. Once inserted, the active ingredient diffuses deep into the wall structure, creating a permanent barrier against rising damp. BBA-approved and ideal for use in brick, stone, and mortar substrates.

Key Features & Benefits

  • Clean & Precise: No mess, no waste – each rod delivers a consistent dose with minimal disruption.
  • High Performance: Delivers a deep, uniform silane-based barrier for long-lasting damp protection.
  • Fast Installation: Pre-measured rods are quick and simple to insert with no specialist tools required.
  • Versatile Application: Suitable for most masonry types, including brick, stone, and mortar joints.
  • BBA Certified: Independently tested and approved for reliability and effectiveness.

Product Details

  • Pack Size: 50 rods
  • Rod Size: 12mm diameter x 180mm length
  • Chemistry: Silane/siloxane-based active ingredient
  • Cure Time: Forms a barrier typically within 2–4 weeks under normal conditions
  • Coverage: Approx. 1 rod per 120mm of wall thickness (1 metre length)

Application Instructions

  1. Drill Holes: Drill 12mm diameter holes at regular intervals along the mortar bed, typically 120mm apart and at the recommended height.
  2. Insert Rods: Push one Dryrod into each hole until fully recessed.
  3. Seal Holes: Plug or repoint the holes to restore the wall finish and retain treatment.
  4. Allow to Cure: The active ingredient disperses into the wall, forming a damp-proof course over the coming weeks.

Limitations

  • Not suitable for walls below 95mm in thickness.
  • Do not use if masonry is saturated with standing water.

Health & Safety

Wear gloves and eye protection during installation. Wash hands after handling. Refer to the Safety Data Sheet (SDS) for full guidance on safe use.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Have a question?

If you have any questions about our products or would like to learn more about our shipping options please feel free to contact one of our team today.

Safeguard Dryrod Damp-Proofing Rods - 50 Pack - For Rising Damp - Armstrong Cheshire
DIY Refurb

Safeguard Dryrod Damp-Proofing Rods - 50 Pack - For Rising Damp

£120.00

High-Performance Damp-Proofing Treatment for Rising Damp in Masonry Walls

Dryrod Damp-Proofing Rods are a patented, high-strength rising damp treatment developed for fast, clean, and effective installation. Each rod contains a powerful silane/siloxane formulation housed in a rigid fibre cartridge, allowing direct insertion into pre-drilled holes. Once inserted, the active ingredient diffuses deep into the wall structure, creating a permanent barrier against rising damp. BBA-approved and ideal for use in brick, stone, and mortar substrates.

Key Features & Benefits

Product Details

Application Instructions

  1. Drill Holes: Drill 12mm diameter holes at regular intervals along the mortar bed, typically 120mm apart and at the recommended height.
  2. Insert Rods: Push one Dryrod into each hole until fully recessed.
  3. Seal Holes: Plug or repoint the holes to restore the wall finish and retain treatment.
  4. Allow to Cure: The active ingredient disperses into the wall, forming a damp-proof course over the coming weeks.

Limitations

Health & Safety

Wear gloves and eye protection during installation. Wash hands after handling. Refer to the Safety Data Sheet (SDS) for full guidance on safe use.

View product