Printed Bricklayer Profile - 50.8mm x 50.8mm (3.2mm thick)
Printed Bricklayer Profile - 50.8mm x 50.8mm (3.2mm thick) - 1500mm long (4ft 11") is backordered and will ship as soon as it is back in stock.
Couldn't load collection availability
Delivery charges will vary depending on your location.
To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode
We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.
Printed Bricklayer Profile – 50.8mm x 50.8mm (3.2mm thick)
Designed for bricklayers and masons, this Printed Bricklayer Profile combines a light yet sturdy aluminium box section with a durable print to guide mortar lines and block alignment. It’s engineered for use with Dori blocks and clamps, delivering quick, reliable layout on site.
Features
- Aluminium box section: 50.8mm x 50.8mm with a 3.2mm wall thickness, offering strength without excess weight.
- Printed gauge on one face: 75mm gauge is applied for quick reference; the remaining three faces are intentionally unprinted to accommodate your own markings.
- Gauge specifics: 75mm between lines; gauge may shift if the cap is removed, and is measured between lines rather than from the end of the profile.
- End caps: capped at both ends to prevent mortar ingress and keep the profile clean during use.
- Durable print: printed with tough ink designed to withstand months of daily site use; scratches to bare aluminium may remove print, but this does not affect performance.
- Sizes and weight: available in 1500mm (2.35kg), 1950mm (3.22kg), and 2250mm (3.71kg) lengths.
- Compliance: profiles conform to BS EN 755-9:2001 for reliability and compatibility with standard bricklaying workflows.
- Finish practicality: expect light scratches or blemishes inherent to aluminium manufacturing; these do not impact structural performance.
Benefits
Precision-made layout that saves time: the printed 75mm gauge provides repeatable reference points for each course, helping you keep level lines and uniform mortar beds across long stretches. The unprinted faces give you room for site-specific markings, notes, or project identifiers without compromising the reference lines.
Durable, site-ready design: end caps prevent mortar ingress, reducing cleanup and maintaining a smooth setup as you position blocks and clamps. The aluminium construction keeps weight manageable for transport around site while delivering the rigidity needed for accurate brickwork alignment.
Versatile for multiple projects: ideal for new build projects, extensions, and renovations where fast, accurate layout matters. For maximum accuracy, lay to the first line (not from the end of the profile) and re-check if the profile length has been adjusted or capped.
Practical care and use: store with caps in place, and handle prints with care to avoid scratching. If the surface is scratched through to bare aluminium, the print may wear away, so treat the profile gently during handling and installation.
Printed Bricklayer Profile - 50.8mm x 50.8mm (3.2mm thick)
Description
Description
Printed Bricklayer Profile – 50.8mm x 50.8mm (3.2mm thick)
Designed for bricklayers and masons, this Printed Bricklayer Profile combines a light yet sturdy aluminium box section with a durable print to guide mortar lines and block alignment. It’s engineered for use with Dori blocks and clamps, delivering quick, reliable layout on site.
Features
- Aluminium box section: 50.8mm x 50.8mm with a 3.2mm wall thickness, offering strength without excess weight.
- Printed gauge on one face: 75mm gauge is applied for quick reference; the remaining three faces are intentionally unprinted to accommodate your own markings.
- Gauge specifics: 75mm between lines; gauge may shift if the cap is removed, and is measured between lines rather than from the end of the profile.
- End caps: capped at both ends to prevent mortar ingress and keep the profile clean during use.
- Durable print: printed with tough ink designed to withstand months of daily site use; scratches to bare aluminium may remove print, but this does not affect performance.
- Sizes and weight: available in 1500mm (2.35kg), 1950mm (3.22kg), and 2250mm (3.71kg) lengths.
- Compliance: profiles conform to BS EN 755-9:2001 for reliability and compatibility with standard bricklaying workflows.
- Finish practicality: expect light scratches or blemishes inherent to aluminium manufacturing; these do not impact structural performance.
Benefits
Precision-made layout that saves time: the printed 75mm gauge provides repeatable reference points for each course, helping you keep level lines and uniform mortar beds across long stretches. The unprinted faces give you room for site-specific markings, notes, or project identifiers without compromising the reference lines.
Durable, site-ready design: end caps prevent mortar ingress, reducing cleanup and maintaining a smooth setup as you position blocks and clamps. The aluminium construction keeps weight manageable for transport around site while delivering the rigidity needed for accurate brickwork alignment.
Versatile for multiple projects: ideal for new build projects, extensions, and renovations where fast, accurate layout matters. For maximum accuracy, lay to the first line (not from the end of the profile) and re-check if the profile length has been adjusted or capped.
Practical care and use: store with caps in place, and handle prints with care to avoid scratching. If the surface is scratched through to bare aluminium, the print may wear away, so treat the profile gently during handling and installation.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
