MDPE Wall Flange 32mm to 3/4" BSPF is a compression fitting that lets you connect a 32mm MDPE pipe to a 3/4" BSP female thread, with a sturdy wall-facing mount for tidy, secure pipework. It’s aimed at tradespeople installing MDPE systems where a flush, wall-fixed connection is required.

The fitting uses MDPE material, recognised for durability, flexibility and chemical resistance, making it suitable for water supply, irrigation and light industrial use. It carries a PN10 pressure rating, meaning it is designed to withstand up to 10 bar (1 MPa or roughly 145 psi) when paired with compatible MDPE pipe. This combination helps maintain system integrity under typical pressure conditions found in domestic and light commercial plumbing.

Key benefits include leak-free joints when installed correctly and long service life in a range of environments. The wall flange design provides a robust mounting point that helps minimise movement and strain on the pipe, reducing the risk of leaks at the junction. MDPE PN10 fittings are corrosion resistant, which contributes to dependable performance in exposed or damp locations. Applications span water supply, irrigation, gas distribution and various industrial processes, offering versatility for site pockets where a wall-fixed outlet is advantageous.

How to install: ensure the cut end of the 32mm MDPE pipe is square and free from burrs. Insert the pipe into the MDPE side of the fitting until seated fully. Tighten the compression connection according to the manufacturer's guidelines to achieve a sealed joint. On the BSP side, apply an appropriate sealant or PTFE tape to the 3/4" BSP female thread if required by installation codes, then assemble to the corresponding male threaded component. Always follow local regulations and best practice for securing pipework to walls or panels, and check for leaks after commissioning.

Choose this wall flange variant when you need a neat, secure transition from MDPE to a threaded outlet that terminates on a wall or panel. Its combination of corrosion resistance, pressure capability and straightforward installation makes it a practical option for reliably routing MDPE piping in accessible or constrained spaces.

Akor
MDPE Pipe Fittings

MDPE Wall Flange 32mm to 3/4" BSPF is a compression fitting that lets you connect a 32mm MDPE pipe to a 3/4" BSP female thread, with a sturdy wall-facing mount for tidy, secure pipework. It’s aimed at tradespeople installing MDPE systems where a flush, wall-fixed connection is required.

The fitting uses MDPE material, recognised for durability, flexibility and chemical resistance, making it suitable for water supply, irrigation and light industrial use. It carries a PN10 pressure rating, meaning it is designed to withstand up to 10 bar (1 MPa or roughly 145 psi) when paired with compatible MDPE pipe. This combination helps maintain system integrity under typical pressure conditions found in domestic and light commercial plumbing.

Key benefits include leak-free joints when installed correctly and long service life in a range of environments. The wall flange design provides a robust mounting point that helps minimise movement and strain on the pipe, reducing the risk of leaks at the junction. MDPE PN10 fittings are corrosion resistant, which contributes to dependable performance in exposed or damp locations. Applications span water supply, irrigation, gas distribution and various industrial processes, offering versatility for site pockets where a wall-fixed outlet is advantageous.

How to install: ensure the cut end of the 32mm MDPE pipe is square and free from burrs. Insert the pipe into the MDPE side of the fitting until seated fully. Tighten the compression connection according to the manufacturer's guidelines to achieve a sealed joint. On the BSP side, apply an appropriate sealant or PTFE tape to the 3/4" BSP female thread if required by installation codes, then assemble to the corresponding male threaded component. Always follow local regulations and best practice for securing pipework to walls or panels, and check for leaks after commissioning.

Choose this wall flange variant when you need a neat, secure transition from MDPE to a threaded outlet that terminates on a wall or panel. Its combination of corrosion resistance, pressure capability and straightforward installation makes it a practical option for reliably routing MDPE piping in accessible or constrained spaces.

Akor
MDPE Pipe Fittings
Ex VAT Inc VAT
CALL US ON
01625 322269
Call us on 01625 322269
Trustpilot
1 4
£5.00
Akor

MDPE Wall Flange 32mm - 3/4" BSPF
Trustpilot

We're here to help Monday to Friday 8:00 - 5:00

Live Chat or call us on 01625 322269

Delivery

Delivery charges will vary depending on your location.

To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode

We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.

Share information about this product with your customers.

MDPE Wall Flange 32mm to 3/4" BSPF is a compression fitting that lets you connect a 32mm MDPE pipe to a 3/4" BSP female thread, with a sturdy wall-facing mount for tidy, secure pipework. It’s aimed at tradespeople installing MDPE systems where a flush, wall-fixed connection is required.

The fitting uses MDPE material, recognised for durability, flexibility and chemical resistance, making it suitable for water supply, irrigation and light industrial use. It carries a PN10 pressure rating, meaning it is designed to withstand up to 10 bar (1 MPa or roughly 145 psi) when paired with compatible MDPE pipe. This combination helps maintain system integrity under typical pressure conditions found in domestic and light commercial plumbing.

Key benefits include leak-free joints when installed correctly and long service life in a range of environments. The wall flange design provides a robust mounting point that helps minimise movement and strain on the pipe, reducing the risk of leaks at the junction. MDPE PN10 fittings are corrosion resistant, which contributes to dependable performance in exposed or damp locations. Applications span water supply, irrigation, gas distribution and various industrial processes, offering versatility for site pockets where a wall-fixed outlet is advantageous.

How to install: ensure the cut end of the 32mm MDPE pipe is square and free from burrs. Insert the pipe into the MDPE side of the fitting until seated fully. Tighten the compression connection according to the manufacturer's guidelines to achieve a sealed joint. On the BSP side, apply an appropriate sealant or PTFE tape to the 3/4" BSP female thread if required by installation codes, then assemble to the corresponding male threaded component. Always follow local regulations and best practice for securing pipework to walls or panels, and check for leaks after commissioning.

Choose this wall flange variant when you need a neat, secure transition from MDPE to a threaded outlet that terminates on a wall or panel. Its combination of corrosion resistance, pressure capability and straightforward installation makes it a practical option for reliably routing MDPE piping in accessible or constrained spaces.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Have a question?

If you have any questions about our products or would like to learn more about our shipping options please feel free to contact one of our team today.

Contact Us
MDPE Wall Flange 32mm - 3/4" BSPF - Armstrong Cheshire
Akor

MDPE Wall Flange 32mm - 3/4" BSPF

£5.00

MDPE Wall Flange 32mm to 3/4" BSPF is a compression fitting that lets you connect a 32mm MDPE pipe to a 3/4" BSP female thread, with a sturdy wall-facing mount for tidy, secure pipework. It’s aimed at tradespeople installing MDPE systems where a flush, wall-fixed connection is required.

The fitting uses MDPE material, recognised for durability, flexibility and chemical resistance, making it suitable for water supply, irrigation and light industrial use. It carries a PN10 pressure rating, meaning it is designed to withstand up to 10 bar (1 MPa or roughly 145 psi) when paired with compatible MDPE pipe. This combination helps maintain system integrity under typical pressure conditions found in domestic and light commercial plumbing.

Key benefits include leak-free joints when installed correctly and long service life in a range of environments. The wall flange design provides a robust mounting point that helps minimise movement and strain on the pipe, reducing the risk of leaks at the junction. MDPE PN10 fittings are corrosion resistant, which contributes to dependable performance in exposed or damp locations. Applications span water supply, irrigation, gas distribution and various industrial processes, offering versatility for site pockets where a wall-fixed outlet is advantageous.

How to install: ensure the cut end of the 32mm MDPE pipe is square and free from burrs. Insert the pipe into the MDPE side of the fitting until seated fully. Tighten the compression connection according to the manufacturer's guidelines to achieve a sealed joint. On the BSP side, apply an appropriate sealant or PTFE tape to the 3/4" BSP female thread if required by installation codes, then assemble to the corresponding male threaded component. Always follow local regulations and best practice for securing pipework to walls or panels, and check for leaks after commissioning.

Choose this wall flange variant when you need a neat, secure transition from MDPE to a threaded outlet that terminates on a wall or panel. Its combination of corrosion resistance, pressure capability and straightforward installation makes it a practical option for reliably routing MDPE piping in accessible or constrained spaces.

View product