This MDPE Wall Flange 25mm to 3/4" BSPF is a compact compression fitting that joins a 25mm MDPE pipe to a 3/4" BSP female thread, designed for neat, secure wall or panel entries in water supply and irrigation systems.

  • Connection type: MDPE wall flange compression fitting, adapts from a 25mm MDPE pipe to a 3/4" BSP female thread, suitable for surface-mounted installations.
  • Pressure rating: PN10 rated; capable of withstanding up to 10 bar (1 MPa) in compliant MDPE piping systems.
  • Material and resistance: MDPE provides chemical resistance and corrosion resistance, helping extend service life in typical domestic and outdoor environments.
  • Seal and joint integrity: Designed to produce leak-free joints when installed according to manufacturer guidance and using compatible seals and components.
  • Durability: Resilient to temperature variations and mechanical stresses, with a long service life under normal piping conditions.
  • Versatility: Suitable for water supply and irrigation applications, with the wall flange feature helping to support and align the pipe run from a flat surface.

Key considerations: The fitting is intended for PN10 MDPE systems and should be installed with compatible MDPE compression fittings to ensure the integrity of the connection. The wall flange provides a neat entry point and helps stabilise the pipe against movement, which can minimise stress on the joint.

Practical usage tips: ensure cut ends are square and clean, insert the pipe fully into the compression area, and tighten per the manufacturer’s instructions to achieve a secure seal. Mount the flange to a suitable flat surface using appropriate fixings, then check for leaks after the first pressurisation. For best results, use alongside matched MDPE PN10 components and follow local guidelines for pipework integrity.

In short, this MDPE Wall Flange 25mm to 3/4" BSPF offers a reliable, space-saving solution for connecting MDPE piping to a threaded outlet, with a robust flange for dependable wall or panel installations in domestic and light commercial settings.

Akor
MDPE Pipe Fittings

This MDPE Wall Flange 25mm to 3/4" BSPF is a compact compression fitting that joins a 25mm MDPE pipe to a 3/4" BSP female thread, designed for neat, secure wall or panel entries in water supply and irrigation systems.

  • Connection type: MDPE wall flange compression fitting, adapts from a 25mm MDPE pipe to a 3/4" BSP female thread, suitable for surface-mounted installations.
  • Pressure rating: PN10 rated; capable of withstanding up to 10 bar (1 MPa) in compliant MDPE piping systems.
  • Material and resistance: MDPE provides chemical resistance and corrosion resistance, helping extend service life in typical domestic and outdoor environments.
  • Seal and joint integrity: Designed to produce leak-free joints when installed according to manufacturer guidance and using compatible seals and components.
  • Durability: Resilient to temperature variations and mechanical stresses, with a long service life under normal piping conditions.
  • Versatility: Suitable for water supply and irrigation applications, with the wall flange feature helping to support and align the pipe run from a flat surface.

Key considerations: The fitting is intended for PN10 MDPE systems and should be installed with compatible MDPE compression fittings to ensure the integrity of the connection. The wall flange provides a neat entry point and helps stabilise the pipe against movement, which can minimise stress on the joint.

Practical usage tips: ensure cut ends are square and clean, insert the pipe fully into the compression area, and tighten per the manufacturer’s instructions to achieve a secure seal. Mount the flange to a suitable flat surface using appropriate fixings, then check for leaks after the first pressurisation. For best results, use alongside matched MDPE PN10 components and follow local guidelines for pipework integrity.

In short, this MDPE Wall Flange 25mm to 3/4" BSPF offers a reliable, space-saving solution for connecting MDPE piping to a threaded outlet, with a robust flange for dependable wall or panel installations in domestic and light commercial settings.

Akor
MDPE Pipe Fittings
Ex VAT Inc VAT
CALL US ON
01625 322269
Call us on 01625 322269
Trustpilot
1 4
Akor

MDPE Wall Flange 25mm - 3/4" BSPF

£4.00

Delivery charges will vary depending on your location.

To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode

We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.

This MDPE Wall Flange 25mm to 3/4" BSPF is a compact compression fitting that joins a 25mm MDPE pipe to a 3/4" BSP female thread, designed for neat, secure wall or panel entries in water supply and irrigation systems.

  • Connection type: MDPE wall flange compression fitting, adapts from a 25mm MDPE pipe to a 3/4" BSP female thread, suitable for surface-mounted installations.
  • Pressure rating: PN10 rated; capable of withstanding up to 10 bar (1 MPa) in compliant MDPE piping systems.
  • Material and resistance: MDPE provides chemical resistance and corrosion resistance, helping extend service life in typical domestic and outdoor environments.
  • Seal and joint integrity: Designed to produce leak-free joints when installed according to manufacturer guidance and using compatible seals and components.
  • Durability: Resilient to temperature variations and mechanical stresses, with a long service life under normal piping conditions.
  • Versatility: Suitable for water supply and irrigation applications, with the wall flange feature helping to support and align the pipe run from a flat surface.

Key considerations: The fitting is intended for PN10 MDPE systems and should be installed with compatible MDPE compression fittings to ensure the integrity of the connection. The wall flange provides a neat entry point and helps stabilise the pipe against movement, which can minimise stress on the joint.

Practical usage tips: ensure cut ends are square and clean, insert the pipe fully into the compression area, and tighten per the manufacturer’s instructions to achieve a secure seal. Mount the flange to a suitable flat surface using appropriate fixings, then check for leaks after the first pressurisation. For best results, use alongside matched MDPE PN10 components and follow local guidelines for pipework integrity.

In short, this MDPE Wall Flange 25mm to 3/4" BSPF offers a reliable, space-saving solution for connecting MDPE piping to a threaded outlet, with a robust flange for dependable wall or panel installations in domestic and light commercial settings.

Description

This MDPE Wall Flange 25mm to 3/4" BSPF is a compact compression fitting that joins a 25mm MDPE pipe to a 3/4" BSP female thread, designed for neat, secure wall or panel entries in water supply and irrigation systems.

  • Connection type: MDPE wall flange compression fitting, adapts from a 25mm MDPE pipe to a 3/4" BSP female thread, suitable for surface-mounted installations.
  • Pressure rating: PN10 rated; capable of withstanding up to 10 bar (1 MPa) in compliant MDPE piping systems.
  • Material and resistance: MDPE provides chemical resistance and corrosion resistance, helping extend service life in typical domestic and outdoor environments.
  • Seal and joint integrity: Designed to produce leak-free joints when installed according to manufacturer guidance and using compatible seals and components.
  • Durability: Resilient to temperature variations and mechanical stresses, with a long service life under normal piping conditions.
  • Versatility: Suitable for water supply and irrigation applications, with the wall flange feature helping to support and align the pipe run from a flat surface.

Key considerations: The fitting is intended for PN10 MDPE systems and should be installed with compatible MDPE compression fittings to ensure the integrity of the connection. The wall flange provides a neat entry point and helps stabilise the pipe against movement, which can minimise stress on the joint.

Practical usage tips: ensure cut ends are square and clean, insert the pipe fully into the compression area, and tighten per the manufacturer’s instructions to achieve a secure seal. Mount the flange to a suitable flat surface using appropriate fixings, then check for leaks after the first pressurisation. For best results, use alongside matched MDPE PN10 components and follow local guidelines for pipework integrity.

In short, this MDPE Wall Flange 25mm to 3/4" BSPF offers a reliable, space-saving solution for connecting MDPE piping to a threaded outlet, with a robust flange for dependable wall or panel installations in domestic and light commercial settings.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Have a question?

If you have any questions about our products or would like to learn more about our shipping options please feel free to contact one of our team today.

Contact Us
MDPE Wall Flange 25mm - 3/4" BSPF - Armstrong Cheshire
Akor

MDPE Wall Flange 25mm - 3/4" BSPF

£4.00

This MDPE Wall Flange 25mm to 3/4" BSPF is a compact compression fitting that joins a 25mm MDPE pipe to a 3/4" BSP female thread, designed for neat, secure wall or panel entries in water supply and irrigation systems.

  • Connection type: MDPE wall flange compression fitting, adapts from a 25mm MDPE pipe to a 3/4" BSP female thread, suitable for surface-mounted installations.
  • Pressure rating: PN10 rated; capable of withstanding up to 10 bar (1 MPa) in compliant MDPE piping systems.
  • Material and resistance: MDPE provides chemical resistance and corrosion resistance, helping extend service life in typical domestic and outdoor environments.
  • Seal and joint integrity: Designed to produce leak-free joints when installed according to manufacturer guidance and using compatible seals and components.
  • Durability: Resilient to temperature variations and mechanical stresses, with a long service life under normal piping conditions.
  • Versatility: Suitable for water supply and irrigation applications, with the wall flange feature helping to support and align the pipe run from a flat surface.

Key considerations: The fitting is intended for PN10 MDPE systems and should be installed with compatible MDPE compression fittings to ensure the integrity of the connection. The wall flange provides a neat entry point and helps stabilise the pipe against movement, which can minimise stress on the joint.

Practical usage tips: ensure cut ends are square and clean, insert the pipe fully into the compression area, and tighten per the manufacturer’s instructions to achieve a secure seal. Mount the flange to a suitable flat surface using appropriate fixings, then check for leaks after the first pressurisation. For best results, use alongside matched MDPE PN10 components and follow local guidelines for pipework integrity.

In short, this MDPE Wall Flange 25mm to 3/4" BSPF offers a reliable, space-saving solution for connecting MDPE piping to a threaded outlet, with a robust flange for dependable wall or panel installations in domestic and light commercial settings.

View product