This MDPE Valve Compression Fitting for 50mm MDPE pipe is a practical solution for tradespeople installing or repairing water, irrigation, and light industrial piping. It combines a robust MDPE body with a compression connection to deliver secure control of flow in MDPE systems. The compression fitting design means you join MDPE pipe quickly and reliably, without needing specialist equipment. The PN10 rating confirms suitability for typical mains pressures found in residential and small commercial installations. MDPE material offers good chemical resistance and durability, helping to minimise maintenance over the life of the pipework. Key features
- Pressure rating: PN10 (maximum 10 bar, about 1 MPa or 145 psi), suitable for standard potable water and irrigation applications.
- Corrosion resistance: MDPE resists corrosion from chemicals commonly encountered in water supply and irrigation environments.
- Leak-free joints: When correctly installed, compression joints are designed to form a tight seal with MDPE pipe.
- Durability: MDPE fittings tolerate temperature variation and mechanical stresses typical of outdoor and service pipework.
- Versatility: Suitable for water supply, irrigation mains, and certain industrial piping tasks that use MDPE pipe.
- Easy installation: No specialist tools required beyond standard hand tools; designed for straightforward, on-site assembly. Who this is for
- Builders, plumbers, and irrigation contractors looking for a dependable 50mm MDPE valve solution that integrates with MDPE piping.
- Homeowners or site managers carrying out retrofit work who need a reliable, easy-to-install valve in an MDPE network.
- Projects where a PN10-rated valve is appropriate for the expected system pressure and pipework. How it helps your project
- Reduces downtime with a simple compression connection that delivers a tight, leak-resistant joint.
- Offers compatibility with PN10 MDPE piping, ensuring consistent performance across water and irrigation systems.
- Provides a durable, long-term solution that stands up to outdoor conditions and routine mechanical handling. Installation notes
- Use with 50mm MDPE pipe; ensure the pipe ends are cut square and clean.
- Align the fitting with the pipe, slide on the compression nut and ring, then tighten per the manufacturer’s instructions to achieve a proper seal.
- Check for leaks after commissioning and follow any site-specific testing procedures.
Akor
MDPE Pipe Fittings
Delivery is free to Mainland England and Wales. Deliveries are chargable to Scotland.
Once the order is placed, our courier will call you within 3 working days to arrange a delivery date. If you do not hear from the courier within 3 days, please get in touch with us. The majority of deliveries are made within 7 days, occasionally a little longer during peak periods.
Deliveries are made between 08:00 and 18:00 on the day, we request the driver calls you one hour before with an advised time.
Delivery is made via a kerbside tail lift lorry, we cannot deliver to sloping ground as the tail lift must be able to lay flat.
The road must be wide enough for a lorry to fit down and free from obstruction, if there are any access restrictions, please contact us.
Deliveries must be signed for, please report any damages to us within 24 hours.
We offer all bricks with a tail lift offloading service, Please familiarise yourself with the information below.
Crane offloading is available as a premium service for some bricks.
All of our C16 and C24 graded timber is regularised
Regularised timber is timber that has been processed to have a uniform shape and size. This means that the wood has been sawn and planed to remove any irregularities and ensure that each piece of wood has consistent dimensions. Regularised timber is often used in construction, particularly in the framing of buildings, as it is easier to work with and can be more efficiently installed than irregularly shaped timber.
We have one of the largest ranges of timber lengths, dimensions and grades available to buy online.
The variation you require will determine the exact lead time and delivery method.
Most orders arrive within 3-4 days, the maximum is 7 days. Please get in touch before you order if you need a specifc delivery date.
Delivery charges vary by postcode. To find out the delivery charge, add the item(s) you require to your basket and select CALCULATE SHIPPING at the bottom of the page.
Some orders are delivered on our own vehicles based in Leicestershire and Cheshire. We also use carriers including Yodel and Tuffnells. For some sizes and locations we use regional distributors.
If you'd prefer crane offloading rather than tail lift vehicle offloading for your brick order then this service is available for the majority of bricks that we sell. Charges are shown at checkout.
For deliveries of less than 6 packs then Taillift offloading is normally a more cost effective option
Downloadable information can be found here:
Armstrong Cheshire supply the full range of Catnic Lintels. If you don't see the lintel you need on our website, choose from the Catnic Lintel Selector Brochure and give us a call 01625 322269
Downloadable information can be found here:
This MDPE Valve Compression Fitting for 50mm MDPE pipe is a practical solution for tradespeople installing or repairing water, irrigation, and light industrial piping. It combines a robust MDPE body with a compression connection to deliver secure control of flow in MDPE systems. The compression fitting design means you join MDPE pipe quickly and reliably, without needing specialist equipment. The PN10 rating confirms suitability for typical mains pressures found in residential and small commercial installations. MDPE material offers good chemical resistance and durability, helping to minimise maintenance over the life of the pipework. Key features
- Pressure rating: PN10 (maximum 10 bar, about 1 MPa or 145 psi), suitable for standard potable water and irrigation applications.
- Corrosion resistance: MDPE resists corrosion from chemicals commonly encountered in water supply and irrigation environments.
- Leak-free joints: When correctly installed, compression joints are designed to form a tight seal with MDPE pipe.
- Durability: MDPE fittings tolerate temperature variation and mechanical stresses typical of outdoor and service pipework.
- Versatility: Suitable for water supply, irrigation mains, and certain industrial piping tasks that use MDPE pipe.
- Easy installation: No specialist tools required beyond standard hand tools; designed for straightforward, on-site assembly. Who this is for
- Builders, plumbers, and irrigation contractors looking for a dependable 50mm MDPE valve solution that integrates with MDPE piping.
- Homeowners or site managers carrying out retrofit work who need a reliable, easy-to-install valve in an MDPE network.
- Projects where a PN10-rated valve is appropriate for the expected system pressure and pipework. How it helps your project
- Reduces downtime with a simple compression connection that delivers a tight, leak-resistant joint.
- Offers compatibility with PN10 MDPE piping, ensuring consistent performance across water and irrigation systems.
- Provides a durable, long-term solution that stands up to outdoor conditions and routine mechanical handling. Installation notes
- Use with 50mm MDPE pipe; ensure the pipe ends are cut square and clean.
- Align the fitting with the pipe, slide on the compression nut and ring, then tighten per the manufacturer’s instructions to achieve a proper seal.
- Check for leaks after commissioning and follow any site-specific testing procedures.
Akor
MDPE Pipe Fittings
Delivery is free to Mainland England and Wales. Deliveries are chargable to Scotland.
Once the order is placed, our courier will call you within 3 working days to arrange a delivery date. If you do not hear from the courier within 3 days, please get in touch with us. The majority of deliveries are made within 7 days, occasionally a little longer during peak periods.
Deliveries are made between 08:00 and 18:00 on the day, we request the driver calls you one hour before with an advised time.
Delivery is made via a kerbside tail lift lorry, we cannot deliver to sloping ground as the tail lift must be able to lay flat.
The road must be wide enough for a lorry to fit down and free from obstruction, if there are any access restrictions, please contact us.
Deliveries must be signed for, please report any damages to us within 24 hours.
We offer all bricks with a tail lift offloading service, Please familiarise yourself with the information below.
Crane offloading is available as a premium service for some bricks.
All of our C16 and C24 graded timber is regularised
Regularised timber is timber that has been processed to have a uniform shape and size. This means that the wood has been sawn and planed to remove any irregularities and ensure that each piece of wood has consistent dimensions. Regularised timber is often used in construction, particularly in the framing of buildings, as it is easier to work with and can be more efficiently installed than irregularly shaped timber.
We have one of the largest ranges of timber lengths, dimensions and grades available to buy online. The variation you require will determine the exact lead time and delivery method.
Most orders arrive within 3-4 days, the maximum is 7 days.
Please get in touch before you order if you need a specific delivery date.
Delivery charges vary by postcode. To find out the delivery charge, add the item(s) you require to your basket and select CALCULATE SHIPPING at the bottom of the page. Some orders are delivered on our vehicles based in Leicestershire and Cheshire. We also use carriers including Yodel and Tuffnells. For some sizes and locations, we use regional distributors.
If you'd prefer crane offloading rather than tail lift vehicle offloading for your brick order then this service is available for the majority of bricks that we sell. Charges are shown at checkout.
For deliveries of less than 6 packs then Taillift offloading is normally a more cost effective option
Downloadable information can be found here:
Armstrong Cheshire supply the full range of Catnic Lintels. If you don't see the lintel you need on our website, choose from the Catnic Lintel Selector Brochure and give us a call 01625 322269
Downloadable information can be found here:
Brick Calculator
Brick Calculator
Akor
MDPE Valve 50mm
£14.00
Unit price
/
Unavailable
This MDPE Valve Compression Fitting for 50mm MDPE pipe is a practical solution for tradespeople installing or repairing water, irrigation, and light industrial piping. It combines a robust MDPE body with a compression connection to deliver secure control of flow in MDPE systems. The compression fitting design means you join MDPE pipe quickly and reliably, without needing specialist equipment. The PN10 rating confirms suitability for typical mains pressures found in residential and small commercial installations. MDPE material offers good chemical resistance and durability, helping to minimise maintenance over the life of the pipework. Key features
- Pressure rating: PN10 (maximum 10 bar, about 1 MPa or 145 psi), suitable for standard potable water and irrigation applications.
- Corrosion resistance: MDPE resists corrosion from chemicals commonly encountered in water supply and irrigation environments.
- Leak-free joints: When correctly installed, compression joints are designed to form a tight seal with MDPE pipe.
- Durability: MDPE fittings tolerate temperature variation and mechanical stresses typical of outdoor and service pipework.
- Versatility: Suitable for water supply, irrigation mains, and certain industrial piping tasks that use MDPE pipe.
- Easy installation: No specialist tools required beyond standard hand tools; designed for straightforward, on-site assembly. Who this is for
- Builders, plumbers, and irrigation contractors looking for a dependable 50mm MDPE valve solution that integrates with MDPE piping.
- Homeowners or site managers carrying out retrofit work who need a reliable, easy-to-install valve in an MDPE network.
- Projects where a PN10-rated valve is appropriate for the expected system pressure and pipework. How it helps your project
- Reduces downtime with a simple compression connection that delivers a tight, leak-resistant joint.
- Offers compatibility with PN10 MDPE piping, ensuring consistent performance across water and irrigation systems.
- Provides a durable, long-term solution that stands up to outdoor conditions and routine mechanical handling. Installation notes
- Use with 50mm MDPE pipe; ensure the pipe ends are cut square and clean.
- Align the fitting with the pipe, slide on the compression nut and ring, then tighten per the manufacturer’s instructions to achieve a proper seal.
- Check for leaks after commissioning and follow any site-specific testing procedures.
