This MDPE Valve 25mm to 3/4" BSPF compression fitting provides a reliable inline connection for MDPE piping, aimed at tradespeople installing water, irrigation, or light industrial lines. It adapts a 25mm MDPE pipe to a 3/4" BSP female thread, delivering a practical shut-off point within existing MDPE networks. Key features and benefits
- Pressure rating: PN10, designed to withstand up to 10 bar (approximately 1 MPa or 145 psi) in compliant MDPE systems.
- Material and corrosion resistance: MDPE offers good chemical resistance, contributing to longer service life in domestic and outdoor environments.
- Leak-free joints: when installed correctly, the compression connection and threaded interface help minimise leakage risks at the transition between MDPE pipe and BSP threaded components.
- Durability: MDPE fittings are known for resilience to temperature variations, mechanical stresses, and weather exposure, supporting reliable performance over time.
- Versatility: suitable for a wide range of MDPE applications, including water supply, irrigation, and light industrial piping, with compatibility to integrate BSP-threaded components. What this means for your job
- Quick adaptation: use this fitting to retrofit an MDPE system where a BSP-threaded valve or accessory is required, without re-piping or using complex adapters.
- Space and cost efficiency: compact design helps keep layouts neat and reduces downtime compared with more complex transition solutions.
- Reliability on site: PN10 rating provides clarity on the maximum expected system pressure, helping you design and commission installations with confidence. Typical use scenarios
- Domestic water service upgrades where a 25mm MDPE supply needs to feed a BSP-threaded valve or accessory.
- Irrigation mains that require a straightforward shut-off point and an MDPE-to-BSP transition.
- Light industrial piping where MDPE piping is prevalent and BSP connections are part of the downstream valve assemblies. Practical tips
- Ensure the 25mm MDPE pipe end is cut square and deburred for a clean compression seat.
- Align the MDPE line with the compression gland before tightening to avoid cross-threading or damaging the pipe.
- Confirm that the BSPF connection on the valve is mating with a compatible BSP male component, and tighten to the manufacturer’s recommended torque. This valve combines the durability and chemical resistance of MDPE with a straightforward 25mm-to-3/4" BSPF transition, making it a sensible, trades-focused choice for reliable flow control within MDPE systems.
Akor
MDPE Pipe Fittings
Delivery is free to Mainland England and Wales. Deliveries are chargable to Scotland.
Once the order is placed, our courier will call you within 3 working days to arrange a delivery date. If you do not hear from the courier within 3 days, please get in touch with us. The majority of deliveries are made within 7 days, occasionally a little longer during peak periods.
Deliveries are made between 08:00 and 18:00 on the day, we request the driver calls you one hour before with an advised time.
Delivery is made via a kerbside tail lift lorry, we cannot deliver to sloping ground as the tail lift must be able to lay flat.
The road must be wide enough for a lorry to fit down and free from obstruction, if there are any access restrictions, please contact us.
Deliveries must be signed for, please report any damages to us within 24 hours.
We offer all bricks with a tail lift offloading service, Please familiarise yourself with the information below.
Crane offloading is available as a premium service for some bricks.
All of our C16 and C24 graded timber is regularised
Regularised timber is timber that has been processed to have a uniform shape and size. This means that the wood has been sawn and planed to remove any irregularities and ensure that each piece of wood has consistent dimensions. Regularised timber is often used in construction, particularly in the framing of buildings, as it is easier to work with and can be more efficiently installed than irregularly shaped timber.
We have one of the largest ranges of timber lengths, dimensions and grades available to buy online.
The variation you require will determine the exact lead time and delivery method.
Most orders arrive within 3-4 days, the maximum is 7 days. Please get in touch before you order if you need a specifc delivery date.
Delivery charges vary by postcode. To find out the delivery charge, add the item(s) you require to your basket and select CALCULATE SHIPPING at the bottom of the page.
Some orders are delivered on our own vehicles based in Leicestershire and Cheshire. We also use carriers including Yodel and Tuffnells. For some sizes and locations we use regional distributors.
If you'd prefer crane offloading rather than tail lift vehicle offloading for your brick order then this service is available for the majority of bricks that we sell. Charges are shown at checkout.
For deliveries of less than 6 packs then Taillift offloading is normally a more cost effective option
Downloadable information can be found here:
Armstrong Cheshire supply the full range of Catnic Lintels. If you don't see the lintel you need on our website, choose from the Catnic Lintel Selector Brochure and give us a call 01625 322269
Downloadable information can be found here:
This MDPE Valve 25mm to 3/4" BSPF compression fitting provides a reliable inline connection for MDPE piping, aimed at tradespeople installing water, irrigation, or light industrial lines. It adapts a 25mm MDPE pipe to a 3/4" BSP female thread, delivering a practical shut-off point within existing MDPE networks. Key features and benefits
- Pressure rating: PN10, designed to withstand up to 10 bar (approximately 1 MPa or 145 psi) in compliant MDPE systems.
- Material and corrosion resistance: MDPE offers good chemical resistance, contributing to longer service life in domestic and outdoor environments.
- Leak-free joints: when installed correctly, the compression connection and threaded interface help minimise leakage risks at the transition between MDPE pipe and BSP threaded components.
- Durability: MDPE fittings are known for resilience to temperature variations, mechanical stresses, and weather exposure, supporting reliable performance over time.
- Versatility: suitable for a wide range of MDPE applications, including water supply, irrigation, and light industrial piping, with compatibility to integrate BSP-threaded components. What this means for your job
- Quick adaptation: use this fitting to retrofit an MDPE system where a BSP-threaded valve or accessory is required, without re-piping or using complex adapters.
- Space and cost efficiency: compact design helps keep layouts neat and reduces downtime compared with more complex transition solutions.
- Reliability on site: PN10 rating provides clarity on the maximum expected system pressure, helping you design and commission installations with confidence. Typical use scenarios
- Domestic water service upgrades where a 25mm MDPE supply needs to feed a BSP-threaded valve or accessory.
- Irrigation mains that require a straightforward shut-off point and an MDPE-to-BSP transition.
- Light industrial piping where MDPE piping is prevalent and BSP connections are part of the downstream valve assemblies. Practical tips
- Ensure the 25mm MDPE pipe end is cut square and deburred for a clean compression seat.
- Align the MDPE line with the compression gland before tightening to avoid cross-threading or damaging the pipe.
- Confirm that the BSPF connection on the valve is mating with a compatible BSP male component, and tighten to the manufacturer’s recommended torque. This valve combines the durability and chemical resistance of MDPE with a straightforward 25mm-to-3/4" BSPF transition, making it a sensible, trades-focused choice for reliable flow control within MDPE systems.
Akor
MDPE Pipe Fittings
Delivery is free to Mainland England and Wales. Deliveries are chargable to Scotland.
Once the order is placed, our courier will call you within 3 working days to arrange a delivery date. If you do not hear from the courier within 3 days, please get in touch with us. The majority of deliveries are made within 7 days, occasionally a little longer during peak periods.
Deliveries are made between 08:00 and 18:00 on the day, we request the driver calls you one hour before with an advised time.
Delivery is made via a kerbside tail lift lorry, we cannot deliver to sloping ground as the tail lift must be able to lay flat.
The road must be wide enough for a lorry to fit down and free from obstruction, if there are any access restrictions, please contact us.
Deliveries must be signed for, please report any damages to us within 24 hours.
We offer all bricks with a tail lift offloading service, Please familiarise yourself with the information below.
Crane offloading is available as a premium service for some bricks.
All of our C16 and C24 graded timber is regularised
Regularised timber is timber that has been processed to have a uniform shape and size. This means that the wood has been sawn and planed to remove any irregularities and ensure that each piece of wood has consistent dimensions. Regularised timber is often used in construction, particularly in the framing of buildings, as it is easier to work with and can be more efficiently installed than irregularly shaped timber.
We have one of the largest ranges of timber lengths, dimensions and grades available to buy online. The variation you require will determine the exact lead time and delivery method.
Most orders arrive within 3-4 days, the maximum is 7 days.
Please get in touch before you order if you need a specific delivery date.
Delivery charges vary by postcode. To find out the delivery charge, add the item(s) you require to your basket and select CALCULATE SHIPPING at the bottom of the page. Some orders are delivered on our vehicles based in Leicestershire and Cheshire. We also use carriers including Yodel and Tuffnells. For some sizes and locations, we use regional distributors.
If you'd prefer crane offloading rather than tail lift vehicle offloading for your brick order then this service is available for the majority of bricks that we sell. Charges are shown at checkout.
For deliveries of less than 6 packs then Taillift offloading is normally a more cost effective option
Downloadable information can be found here:
Armstrong Cheshire supply the full range of Catnic Lintels. If you don't see the lintel you need on our website, choose from the Catnic Lintel Selector Brochure and give us a call 01625 322269
Downloadable information can be found here:
Brick Calculator
Brick Calculator
Akor
MDPE Valve 25mm - 3/4" BSPF
£4.00
Unit price
/
Unavailable
This MDPE Valve 25mm to 3/4" BSPF compression fitting provides a reliable inline connection for MDPE piping, aimed at tradespeople installing water, irrigation, or light industrial lines. It adapts a 25mm MDPE pipe to a 3/4" BSP female thread, delivering a practical shut-off point within existing MDPE networks. Key features and benefits
- Pressure rating: PN10, designed to withstand up to 10 bar (approximately 1 MPa or 145 psi) in compliant MDPE systems.
- Material and corrosion resistance: MDPE offers good chemical resistance, contributing to longer service life in domestic and outdoor environments.
- Leak-free joints: when installed correctly, the compression connection and threaded interface help minimise leakage risks at the transition between MDPE pipe and BSP threaded components.
- Durability: MDPE fittings are known for resilience to temperature variations, mechanical stresses, and weather exposure, supporting reliable performance over time.
- Versatility: suitable for a wide range of MDPE applications, including water supply, irrigation, and light industrial piping, with compatibility to integrate BSP-threaded components. What this means for your job
- Quick adaptation: use this fitting to retrofit an MDPE system where a BSP-threaded valve or accessory is required, without re-piping or using complex adapters.
- Space and cost efficiency: compact design helps keep layouts neat and reduces downtime compared with more complex transition solutions.
- Reliability on site: PN10 rating provides clarity on the maximum expected system pressure, helping you design and commission installations with confidence. Typical use scenarios
- Domestic water service upgrades where a 25mm MDPE supply needs to feed a BSP-threaded valve or accessory.
- Irrigation mains that require a straightforward shut-off point and an MDPE-to-BSP transition.
- Light industrial piping where MDPE piping is prevalent and BSP connections are part of the downstream valve assemblies. Practical tips
- Ensure the 25mm MDPE pipe end is cut square and deburred for a clean compression seat.
- Align the MDPE line with the compression gland before tightening to avoid cross-threading or damaging the pipe.
- Confirm that the BSPF connection on the valve is mating with a compatible BSP male component, and tighten to the manufacturer’s recommended torque. This valve combines the durability and chemical resistance of MDPE with a straightforward 25mm-to-3/4" BSPF transition, making it a sensible, trades-focused choice for reliable flow control within MDPE systems.
