MDPE Valve 25mm
MDPE Valve 25mm is backordered and will ship as soon as it is back in stock.
Couldn't load collection availability
Delivery charges will vary depending on your location.
To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode
We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.
This MDPE Valve 25mm is a compression-fitting valve designed for MDPE piping, giving tradespeople a reliable isolation point in 25mm MDPE runs for water, irrigation or light industrial applications.
Designed for MDPE pipe, the valve uses threaded compression connections to secure a seal and minimise leakage when installed correctly. The fitting is compatible with PN10 PE pipe systems, aligning with common 10 bar maximum pressures found in domestic and light commercial water and irrigation networks.
Key technical points: - Pressure rating: PN10, up to 10 bar (approximately 1 MPa or 145 psi) for MDPE pipe systems. - Material performance: MDPE offers chemical resistance and durability, helping resist corrosion from substances typically encountered in water, irrigation and related environments. - Joint integrity: Precisely engineered compression connections are designed to create leak-free joints when the pipe ends are prepared and installed correctly.
Why choose this valve — it provides a robust means to isolate sections of MDPE piping for maintenance, repairs or system changes without replacing whole runs. Its MDPE body and compression fittings deliver a practical, shift-friendly solution that supports straightforward field servicing and replacements.
Use cases: - Isolating a water supply line in a domestic or small-scale commercial setting. - Temporary or permanent shut-off in irrigation circuits. - Light industrial water or process lines where MDPE is specified.
In installation terms, prepare the pipe ends squarely, slide on the compression nut and olive as directed, then insert the pipe into the valve body and tighten to seal. As with all compression fittings, correct alignment, pipe cleanliness and proper tightening are essential for a reliable, long-lasting joint. This valve is intended for use with MDPE piping and should not be substituted with other plastics unless the manufacturer confirms compatibility.
Ideal for tradespeople, contractors and careful DIYers who need a dependable MDPE 25mm isolation valve that balances performance with cost-effectiveness in water, irrigation and light industrial piping networks.
Description
Description
This MDPE Valve 25mm is a compression-fitting valve designed for MDPE piping, giving tradespeople a reliable isolation point in 25mm MDPE runs for water, irrigation or light industrial applications.
Designed for MDPE pipe, the valve uses threaded compression connections to secure a seal and minimise leakage when installed correctly. The fitting is compatible with PN10 PE pipe systems, aligning with common 10 bar maximum pressures found in domestic and light commercial water and irrigation networks.
Key technical points: - Pressure rating: PN10, up to 10 bar (approximately 1 MPa or 145 psi) for MDPE pipe systems. - Material performance: MDPE offers chemical resistance and durability, helping resist corrosion from substances typically encountered in water, irrigation and related environments. - Joint integrity: Precisely engineered compression connections are designed to create leak-free joints when the pipe ends are prepared and installed correctly.
Why choose this valve — it provides a robust means to isolate sections of MDPE piping for maintenance, repairs or system changes without replacing whole runs. Its MDPE body and compression fittings deliver a practical, shift-friendly solution that supports straightforward field servicing and replacements.
Use cases: - Isolating a water supply line in a domestic or small-scale commercial setting. - Temporary or permanent shut-off in irrigation circuits. - Light industrial water or process lines where MDPE is specified.
In installation terms, prepare the pipe ends squarely, slide on the compression nut and olive as directed, then insert the pipe into the valve body and tighten to seal. As with all compression fittings, correct alignment, pipe cleanliness and proper tightening are essential for a reliable, long-lasting joint. This valve is intended for use with MDPE piping and should not be substituted with other plastics unless the manufacturer confirms compatibility.
Ideal for tradespeople, contractors and careful DIYers who need a dependable MDPE 25mm isolation valve that balances performance with cost-effectiveness in water, irrigation and light industrial piping networks.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
