MDPE Valve 20mm - 1/2" BSPM
MDPE Valve 20mm - 1/2" BSPM is backordered and will ship as soon as it is back in stock.
Couldn't load collection availability
Delivery charges will vary depending on your location.
To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode
We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.
An MDPE valve compression fitting that converts a 20mm MDPE pipe to a 1/2" BSPM thread. Built for water supply, irrigation and light industrial piping, it delivers a secure connection with no specialist equipment required.
Rated PN10, this fitting is designed to withstand up to 10 bar (approximately 145 psi) under typical cold-water conditions.
MDPE material offers good corrosion resistance to chemicals and stands up to outdoor exposure, temperature changes and mechanical stress. The compression joint forms a leak-free seal when installed correctly, helping to reduce maintenance needs.
Versatile: it adapts MDPE pipe to a standard 1/2" BSP male thread, enabling connections to valves, taps and other threaded components in domestic, irrigation and light industrial applications.
Practical use: ideal for retrofits and new installs where a 20mm MDPE line must feed into a threaded outlet, such as garden mains, irrigation manifolds or water-control points.
Installation tips: cut the MDPE pipe square and clean the end before inserting into the compression nut; tighten sufficiently to seal and check for leaks after commissioning. Regularly inspect joints as part of routine maintenance.
Description
Description
An MDPE valve compression fitting that converts a 20mm MDPE pipe to a 1/2" BSPM thread. Built for water supply, irrigation and light industrial piping, it delivers a secure connection with no specialist equipment required.
Rated PN10, this fitting is designed to withstand up to 10 bar (approximately 145 psi) under typical cold-water conditions.
MDPE material offers good corrosion resistance to chemicals and stands up to outdoor exposure, temperature changes and mechanical stress. The compression joint forms a leak-free seal when installed correctly, helping to reduce maintenance needs.
Versatile: it adapts MDPE pipe to a standard 1/2" BSP male thread, enabling connections to valves, taps and other threaded components in domestic, irrigation and light industrial applications.
Practical use: ideal for retrofits and new installs where a 20mm MDPE line must feed into a threaded outlet, such as garden mains, irrigation manifolds or water-control points.
Installation tips: cut the MDPE pipe square and clean the end before inserting into the compression nut; tighten sufficiently to seal and check for leaks after commissioning. Regularly inspect joints as part of routine maintenance.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
