MDPE Valve 20mm to 1/2" BSPF is a compression valve fitting designed for MDPE piping, giving tradespeople a reliable way to connect a 20mm MDPE line to a 1/2" BSP female outlet. It suits domestic water, irrigation, and light industrial installations where a secure MDPE to BSP connection is needed. This fitting combines a 20mm MDPE compression end with a 1/2" BSP female thread. The MDPE body provides chemical resistance and durability, while the compression nut and olive create a leak-free joint on the MDPE pipe when installed correctly. The 1/2" BSPF outlet accepts compatible male BSP connectors, enabling straightforward integration with standard fittings and valves.
  • Pressure rating: PN10 MDPE fittings designed to withstand up to 10 bar (approximately 145 psi) in typical water and irrigation networks.
  • Material and durability: MDPE offers corrosion resistance and flexibility, helping manage pressure fluctuations and outdoor exposure.
  • Joint integrity: Compression connection on the MDPE side is intended to be leak-free when the olive is seated and the nut is tightened per guidance.
  • Outlet type: 1/2" BSPF thread provides a standard female thread for compatible male BSP components.
  • Versatility: Suitable for water supply, irrigation manifolds, and systems where an MDPE to BSP connection is required.
  • Ease of installation: No specialised equipment is needed beyond basic hand tools; ensure clean, square pipe ends and proper tightening.
Use cases: - Isolating and diverting water in a garden irrigation setup by linking MDPE 20mm runs to a 1/2" BSP male valve or accessory. - Retrofitting an existing MDPE network to connect to standard BSP accessories, filters, or back-check valves. - Joining MDPE pipework to compatible pressure-regulating or metering devices with BSP connections. Installation tips: - Cut the MDPE pipe square, deburr edges, and slide the olive into the pipe before tightening the compression nut. - Thread the BSP side only to the mating component; use appropriate thread sealant or PTFE tape on the male BSP thread, not on the compression side. - Do not overtighten; test the system for leaks with the correct pressure, then repressurise gradually. This fitting offers a practical, field-proven solution for converting a 20mm MDPE run to a 1/2" BSP outlet, with a focus on straightforward installation and durable performance in typical UK plumbing and irrigation applications.
Akor
MDPE Pipe Fittings
MDPE Valve 20mm to 1/2" BSPF is a compression valve fitting designed for MDPE piping, giving tradespeople a reliable way to connect a 20mm MDPE line to a 1/2" BSP female outlet. It suits domestic water, irrigation, and light industrial installations where a secure MDPE to BSP connection is needed. This fitting combines a 20mm MDPE compression end with a 1/2" BSP female thread. The MDPE body provides chemical resistance and durability, while the compression nut and olive create a leak-free joint on the MDPE pipe when installed correctly. The 1/2" BSPF outlet accepts compatible male BSP connectors, enabling straightforward integration with standard fittings and valves.
  • Pressure rating: PN10 MDPE fittings designed to withstand up to 10 bar (approximately 145 psi) in typical water and irrigation networks.
  • Material and durability: MDPE offers corrosion resistance and flexibility, helping manage pressure fluctuations and outdoor exposure.
  • Joint integrity: Compression connection on the MDPE side is intended to be leak-free when the olive is seated and the nut is tightened per guidance.
  • Outlet type: 1/2" BSPF thread provides a standard female thread for compatible male BSP components.
  • Versatility: Suitable for water supply, irrigation manifolds, and systems where an MDPE to BSP connection is required.
  • Ease of installation: No specialised equipment is needed beyond basic hand tools; ensure clean, square pipe ends and proper tightening.
Use cases: - Isolating and diverting water in a garden irrigation setup by linking MDPE 20mm runs to a 1/2" BSP male valve or accessory. - Retrofitting an existing MDPE network to connect to standard BSP accessories, filters, or back-check valves. - Joining MDPE pipework to compatible pressure-regulating or metering devices with BSP connections. Installation tips: - Cut the MDPE pipe square, deburr edges, and slide the olive into the pipe before tightening the compression nut. - Thread the BSP side only to the mating component; use appropriate thread sealant or PTFE tape on the male BSP thread, not on the compression side. - Do not overtighten; test the system for leaks with the correct pressure, then repressurise gradually. This fitting offers a practical, field-proven solution for converting a 20mm MDPE run to a 1/2" BSP outlet, with a focus on straightforward installation and durable performance in typical UK plumbing and irrigation applications.
Akor
MDPE Pipe Fittings
Ex VAT Inc VAT
CALL US ON
01625 322269
Call us on 01625 322269
Trustpilot
Akor

MDPE Valve 20mm - 1/2" BSPF

£4.00

Delivery charges will vary depending on your location.

To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode

We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.

MDPE Valve 20mm to 1/2" BSPF is a compression valve fitting designed for MDPE piping, giving tradespeople a reliable way to connect a 20mm MDPE line to a 1/2" BSP female outlet. It suits domestic water, irrigation, and light industrial installations where a secure MDPE to BSP connection is needed. This fitting combines a 20mm MDPE compression end with a 1/2" BSP female thread. The MDPE body provides chemical resistance and durability, while the compression nut and olive create a leak-free joint on the MDPE pipe when installed correctly. The 1/2" BSPF outlet accepts compatible male BSP connectors, enabling straightforward integration with standard fittings and valves.
  • Pressure rating: PN10 MDPE fittings designed to withstand up to 10 bar (approximately 145 psi) in typical water and irrigation networks.
  • Material and durability: MDPE offers corrosion resistance and flexibility, helping manage pressure fluctuations and outdoor exposure.
  • Joint integrity: Compression connection on the MDPE side is intended to be leak-free when the olive is seated and the nut is tightened per guidance.
  • Outlet type: 1/2" BSPF thread provides a standard female thread for compatible male BSP components.
  • Versatility: Suitable for water supply, irrigation manifolds, and systems where an MDPE to BSP connection is required.
  • Ease of installation: No specialised equipment is needed beyond basic hand tools; ensure clean, square pipe ends and proper tightening.
Use cases: - Isolating and diverting water in a garden irrigation setup by linking MDPE 20mm runs to a 1/2" BSP male valve or accessory. - Retrofitting an existing MDPE network to connect to standard BSP accessories, filters, or back-check valves. - Joining MDPE pipework to compatible pressure-regulating or metering devices with BSP connections. Installation tips: - Cut the MDPE pipe square, deburr edges, and slide the olive into the pipe before tightening the compression nut. - Thread the BSP side only to the mating component; use appropriate thread sealant or PTFE tape on the male BSP thread, not on the compression side. - Do not overtighten; test the system for leaks with the correct pressure, then repressurise gradually. This fitting offers a practical, field-proven solution for converting a 20mm MDPE run to a 1/2" BSP outlet, with a focus on straightforward installation and durable performance in typical UK plumbing and irrigation applications.

Description
MDPE Valve 20mm to 1/2" BSPF is a compression valve fitting designed for MDPE piping, giving tradespeople a reliable way to connect a 20mm MDPE line to a 1/2" BSP female outlet. It suits domestic water, irrigation, and light industrial installations where a secure MDPE to BSP connection is needed. This fitting combines a 20mm MDPE compression end with a 1/2" BSP female thread. The MDPE body provides chemical resistance and durability, while the compression nut and olive create a leak-free joint on the MDPE pipe when installed correctly. The 1/2" BSPF outlet accepts compatible male BSP connectors, enabling straightforward integration with standard fittings and valves.
  • Pressure rating: PN10 MDPE fittings designed to withstand up to 10 bar (approximately 145 psi) in typical water and irrigation networks.
  • Material and durability: MDPE offers corrosion resistance and flexibility, helping manage pressure fluctuations and outdoor exposure.
  • Joint integrity: Compression connection on the MDPE side is intended to be leak-free when the olive is seated and the nut is tightened per guidance.
  • Outlet type: 1/2" BSPF thread provides a standard female thread for compatible male BSP components.
  • Versatility: Suitable for water supply, irrigation manifolds, and systems where an MDPE to BSP connection is required.
  • Ease of installation: No specialised equipment is needed beyond basic hand tools; ensure clean, square pipe ends and proper tightening.
Use cases: - Isolating and diverting water in a garden irrigation setup by linking MDPE 20mm runs to a 1/2" BSP male valve or accessory. - Retrofitting an existing MDPE network to connect to standard BSP accessories, filters, or back-check valves. - Joining MDPE pipework to compatible pressure-regulating or metering devices with BSP connections. Installation tips: - Cut the MDPE pipe square, deburr edges, and slide the olive into the pipe before tightening the compression nut. - Thread the BSP side only to the mating component; use appropriate thread sealant or PTFE tape on the male BSP thread, not on the compression side. - Do not overtighten; test the system for leaks with the correct pressure, then repressurise gradually. This fitting offers a practical, field-proven solution for converting a 20mm MDPE run to a 1/2" BSP outlet, with a focus on straightforward installation and durable performance in typical UK plumbing and irrigation applications.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Have a question?

If you have any questions about our products or would like to learn more about our shipping options please feel free to contact one of our team today.

Contact Us
MDPE Valve 20mm - 1/2" BSPF - Armstrong Cheshire
Akor

MDPE Valve 20mm - 1/2" BSPF

£4.00
MDPE Valve 20mm to 1/2" BSPF is a compression valve fitting designed for MDPE piping, giving tradespeople a reliable way to connect a 20mm MDPE line to a 1/2" BSP female outlet. It suits domestic water, irrigation, and light industrial installations where a secure MDPE to BSP connection is needed. This fitting combines a 20mm MDPE compression end with a 1/2" BSP female thread. The MDPE body provides chemical resistance and durability, while the compression nut and olive create a leak-free joint on the MDPE pipe when installed correctly. The 1/2" BSPF outlet accepts compatible male BSP connectors, enabling straightforward integration with standard fittings and valves.
  • Pressure rating: PN10 MDPE fittings designed to withstand up to 10 bar (approximately 145 psi) in typical water and irrigation networks.
  • Material and durability: MDPE offers corrosion resistance and flexibility, helping manage pressure fluctuations and outdoor exposure.
  • Joint integrity: Compression connection on the MDPE side is intended to be leak-free when the olive is seated and the nut is tightened per guidance.
  • Outlet type: 1/2" BSPF thread provides a standard female thread for compatible male BSP components.
  • Versatility: Suitable for water supply, irrigation manifolds, and systems where an MDPE to BSP connection is required.
  • Ease of installation: No specialised equipment is needed beyond basic hand tools; ensure clean, square pipe ends and proper tightening.
Use cases: - Isolating and diverting water in a garden irrigation setup by linking MDPE 20mm runs to a 1/2" BSP male valve or accessory. - Retrofitting an existing MDPE network to connect to standard BSP accessories, filters, or back-check valves. - Joining MDPE pipework to compatible pressure-regulating or metering devices with BSP connections. Installation tips: - Cut the MDPE pipe square, deburr edges, and slide the olive into the pipe before tightening the compression nut. - Thread the BSP side only to the mating component; use appropriate thread sealant or PTFE tape on the male BSP thread, not on the compression side. - Do not overtighten; test the system for leaks with the correct pressure, then repressurise gradually. This fitting offers a practical, field-proven solution for converting a 20mm MDPE run to a 1/2" BSP outlet, with a focus on straightforward installation and durable performance in typical UK plumbing and irrigation applications.
View product