The MDPE Tee Compression Fitting splits a 50mm MDPE supply line to a 1.5" BSP Male thread, giving tradespeople a reliable branch connection for water or irrigation systems. Key features include a PN10 pressure rating (up to 10 bar), MDPE material with good chemical resistance, and a threaded compression joint designed to form a tight seal when assembled correctly. The 90-degree branch off the main run makes it practical for routing water to taps, sprinklers, or ancillary equipment without welding or solvent welding. Expect durable performance in varying weather and temperature conditions, with a long service life typical of MDPE fittings. This fitting is ideal for domestic water networks, agricultural irrigation, and light industrial piping where a secure branch is required from a 50mm MDPE line to a 1.5" BSPM outlet. It supports straightforward installation in systems that use MDPE pipe and PN10-rated components, helping crews avoid lengthy, complex jointing methods while maintaining system integrity. Installation tips to get the best result: ensure the 50mm MDPE pipe ends are clean and square, and cut straight. Insert the pipe fully into the compression nut and olive before tightening the nut with the appropriate spanner. Tighten to the manufacturer’s recommended torque without overtightening, then pressurise the line and check for leaks. Regular inspection of joints in exposed or outdoor installations is sensible, especially where temperature fluctuations occur. Durability and maintenance: MDPE fittings resist most common chemicals and acids found in residential and light industrial environments, helping reduce corrosion-related maintenance. The compression connection is designed for repeatable assembly and disassembly if adjustments are needed, subject to proper re-tightening and re-sealing. This makes the 50mm to 1.5" BSPM MDPE Tee a practical, cost-conscious choice for connecting branch lines in water supply and irrigation schemes.
Akor
MDPE Pipe Fittings
Delivery is free to Mainland England and Wales. Deliveries are chargable to Scotland.
Once the order is placed, our courier will call you within 3 working days to arrange a delivery date. If you do not hear from the courier within 3 days, please get in touch with us. The majority of deliveries are made within 7 days, occasionally a little longer during peak periods.
Deliveries are made between 08:00 and 18:00 on the day, we request the driver calls you one hour before with an advised time.
Delivery is made via a kerbside tail lift lorry, we cannot deliver to sloping ground as the tail lift must be able to lay flat.
The road must be wide enough for a lorry to fit down and free from obstruction, if there are any access restrictions, please contact us.
Deliveries must be signed for, please report any damages to us within 24 hours.
We offer all bricks with a tail lift offloading service, Please familiarise yourself with the information below.
Crane offloading is available as a premium service for some bricks.
All of our C16 and C24 graded timber is regularised
Regularised timber is timber that has been processed to have a uniform shape and size. This means that the wood has been sawn and planed to remove any irregularities and ensure that each piece of wood has consistent dimensions. Regularised timber is often used in construction, particularly in the framing of buildings, as it is easier to work with and can be more efficiently installed than irregularly shaped timber.
We have one of the largest ranges of timber lengths, dimensions and grades available to buy online.
The variation you require will determine the exact lead time and delivery method.
Most orders arrive within 3-4 days, the maximum is 7 days. Please get in touch before you order if you need a specifc delivery date.
Delivery charges vary by postcode. To find out the delivery charge, add the item(s) you require to your basket and select CALCULATE SHIPPING at the bottom of the page.
Some orders are delivered on our own vehicles based in Leicestershire and Cheshire. We also use carriers including Yodel and Tuffnells. For some sizes and locations we use regional distributors.
If you'd prefer crane offloading rather than tail lift vehicle offloading for your brick order then this service is available for the majority of bricks that we sell. Charges are shown at checkout.
For deliveries of less than 6 packs then Taillift offloading is normally a more cost effective option
Downloadable information can be found here:
Armstrong Cheshire supply the full range of Catnic Lintels. If you don't see the lintel you need on our website, choose from the Catnic Lintel Selector Brochure and give us a call 01625 322269
Downloadable information can be found here:
The MDPE Tee Compression Fitting splits a 50mm MDPE supply line to a 1.5" BSP Male thread, giving tradespeople a reliable branch connection for water or irrigation systems. Key features include a PN10 pressure rating (up to 10 bar), MDPE material with good chemical resistance, and a threaded compression joint designed to form a tight seal when assembled correctly. The 90-degree branch off the main run makes it practical for routing water to taps, sprinklers, or ancillary equipment without welding or solvent welding. Expect durable performance in varying weather and temperature conditions, with a long service life typical of MDPE fittings. This fitting is ideal for domestic water networks, agricultural irrigation, and light industrial piping where a secure branch is required from a 50mm MDPE line to a 1.5" BSPM outlet. It supports straightforward installation in systems that use MDPE pipe and PN10-rated components, helping crews avoid lengthy, complex jointing methods while maintaining system integrity. Installation tips to get the best result: ensure the 50mm MDPE pipe ends are clean and square, and cut straight. Insert the pipe fully into the compression nut and olive before tightening the nut with the appropriate spanner. Tighten to the manufacturer’s recommended torque without overtightening, then pressurise the line and check for leaks. Regular inspection of joints in exposed or outdoor installations is sensible, especially where temperature fluctuations occur. Durability and maintenance: MDPE fittings resist most common chemicals and acids found in residential and light industrial environments, helping reduce corrosion-related maintenance. The compression connection is designed for repeatable assembly and disassembly if adjustments are needed, subject to proper re-tightening and re-sealing. This makes the 50mm to 1.5" BSPM MDPE Tee a practical, cost-conscious choice for connecting branch lines in water supply and irrigation schemes.
Akor
MDPE Pipe Fittings
Delivery is free to Mainland England and Wales. Deliveries are chargable to Scotland.
Once the order is placed, our courier will call you within 3 working days to arrange a delivery date. If you do not hear from the courier within 3 days, please get in touch with us. The majority of deliveries are made within 7 days, occasionally a little longer during peak periods.
Deliveries are made between 08:00 and 18:00 on the day, we request the driver calls you one hour before with an advised time.
Delivery is made via a kerbside tail lift lorry, we cannot deliver to sloping ground as the tail lift must be able to lay flat.
The road must be wide enough for a lorry to fit down and free from obstruction, if there are any access restrictions, please contact us.
Deliveries must be signed for, please report any damages to us within 24 hours.
We offer all bricks with a tail lift offloading service, Please familiarise yourself with the information below.
Crane offloading is available as a premium service for some bricks.
All of our C16 and C24 graded timber is regularised
Regularised timber is timber that has been processed to have a uniform shape and size. This means that the wood has been sawn and planed to remove any irregularities and ensure that each piece of wood has consistent dimensions. Regularised timber is often used in construction, particularly in the framing of buildings, as it is easier to work with and can be more efficiently installed than irregularly shaped timber.
We have one of the largest ranges of timber lengths, dimensions and grades available to buy online. The variation you require will determine the exact lead time and delivery method.
Most orders arrive within 3-4 days, the maximum is 7 days.
Please get in touch before you order if you need a specific delivery date.
Delivery charges vary by postcode. To find out the delivery charge, add the item(s) you require to your basket and select CALCULATE SHIPPING at the bottom of the page. Some orders are delivered on our vehicles based in Leicestershire and Cheshire. We also use carriers including Yodel and Tuffnells. For some sizes and locations, we use regional distributors.
If you'd prefer crane offloading rather than tail lift vehicle offloading for your brick order then this service is available for the majority of bricks that we sell. Charges are shown at checkout.
For deliveries of less than 6 packs then Taillift offloading is normally a more cost effective option
Downloadable information can be found here:
Armstrong Cheshire supply the full range of Catnic Lintels. If you don't see the lintel you need on our website, choose from the Catnic Lintel Selector Brochure and give us a call 01625 322269
Downloadable information can be found here:
Brick Calculator
Brick Calculator
Akor
MDPE Tee 50mm - 1.5" BSPM - 50mm
£9.00
Unit price
/
Unavailable
The MDPE Tee Compression Fitting splits a 50mm MDPE supply line to a 1.5" BSP Male thread, giving tradespeople a reliable branch connection for water or irrigation systems. Key features include a PN10 pressure rating (up to 10 bar), MDPE material with good chemical resistance, and a threaded compression joint designed to form a tight seal when assembled correctly. The 90-degree branch off the main run makes it practical for routing water to taps, sprinklers, or ancillary equipment without welding or solvent welding. Expect durable performance in varying weather and temperature conditions, with a long service life typical of MDPE fittings. This fitting is ideal for domestic water networks, agricultural irrigation, and light industrial piping where a secure branch is required from a 50mm MDPE line to a 1.5" BSPM outlet. It supports straightforward installation in systems that use MDPE pipe and PN10-rated components, helping crews avoid lengthy, complex jointing methods while maintaining system integrity. Installation tips to get the best result: ensure the 50mm MDPE pipe ends are clean and square, and cut straight. Insert the pipe fully into the compression nut and olive before tightening the nut with the appropriate spanner. Tighten to the manufacturer’s recommended torque without overtightening, then pressurise the line and check for leaks. Regular inspection of joints in exposed or outdoor installations is sensible, especially where temperature fluctuations occur. Durability and maintenance: MDPE fittings resist most common chemicals and acids found in residential and light industrial environments, helping reduce corrosion-related maintenance. The compression connection is designed for repeatable assembly and disassembly if adjustments are needed, subject to proper re-tightening and re-sealing. This makes the 50mm to 1.5" BSPM MDPE Tee a practical, cost-conscious choice for connecting branch lines in water supply and irrigation schemes.
