MDPE Tee 32mm - 3/4" BSPF - 32mm
MDPE Tee 32mm - 3/4" BSPF - 32mm is backordered and will ship as soon as it is back in stock.
Couldn't load collection availability
Delivery charges will vary depending on your location.
To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode
We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.
The MDPE Tee Compression Fitting 32mm to 3/4" BSPF is a robust, easy-to-install branch fitting for MDPE piping, aimed at tradespeople handling water supply and irrigation projects.
It takes a 32mm main line and provides a 3/4" BSP female thread, creating a 90-degree branch to feed an additional line or appliance. The threaded compression connection is designed to deliver a tight, leak-free seal when paired with MDPE pipe, aiding reliability in pressurised systems.
- Pressure rating PN10: suitable for up to 10 bar (approximately 1 MPa or 145 psi) in typical domestic and light commercial installations
- MDPE material offers good chemical resistance and durability, supporting long service life across varied environments
- Corrosion-resistant and weather-tolerant, appropriate for both indoor and outdoor setups
- Leak-free joints when installed correctly with MDPE pipe and compression fittings
- Versatile for water supply, irrigation and related industrial piping where a 32mm to 3/4" BSP connection is required
- Simple, tool-light installation without the need for specialist equipment
Practical tips: ensure pipe ends are clean and square, align the 32mm branch with the tee correctly, and tighten the compression nut to the manufacturer’s guidelines. After installation, test the system at or below PN10 rating to verify a leak-free joint. This fitting complements MDPE networks by providing a reliable branch point without compromising system integrity.
Description
Description
The MDPE Tee Compression Fitting 32mm to 3/4" BSPF is a robust, easy-to-install branch fitting for MDPE piping, aimed at tradespeople handling water supply and irrigation projects.
It takes a 32mm main line and provides a 3/4" BSP female thread, creating a 90-degree branch to feed an additional line or appliance. The threaded compression connection is designed to deliver a tight, leak-free seal when paired with MDPE pipe, aiding reliability in pressurised systems.
- Pressure rating PN10: suitable for up to 10 bar (approximately 1 MPa or 145 psi) in typical domestic and light commercial installations
- MDPE material offers good chemical resistance and durability, supporting long service life across varied environments
- Corrosion-resistant and weather-tolerant, appropriate for both indoor and outdoor setups
- Leak-free joints when installed correctly with MDPE pipe and compression fittings
- Versatile for water supply, irrigation and related industrial piping where a 32mm to 3/4" BSP connection is required
- Simple, tool-light installation without the need for specialist equipment
Practical tips: ensure pipe ends are clean and square, align the 32mm branch with the tee correctly, and tighten the compression nut to the manufacturer’s guidelines. After installation, test the system at or below PN10 rating to verify a leak-free joint. This fitting complements MDPE networks by providing a reliable branch point without compromising system integrity.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
