MDPE Tee Compression Fitting, 25mm to 3/4" BSPF, is a practical branch connector for MDPE piping systems. Designed for tradespeople and hands-on builders, it lets you split a 25mm line into a 3/4" BSP female thread at a 90-degree angle with a secure, proven connection. Key features you can rely on include a PN10 rating (up to 10 bar) and a MDPE body that offers good chemical resistance and durability. The fitting is engineered to provide leak-free joints when installed correctly and to withstand typical residential and light industrial conditions, including temperature variations and environmental exposure. This tee uses a compression connection, meaning it’s straightforward to install with no specialist equipment required. For a reliable seal, ensure the MDPE pipe is clean and fully seated in the socket, then tighten the compression nut in line with standard practice. The 3/4" BSPF thread provides a compatible port for downstream components, expanding the options for branch connections within water supply and irrigation layouts. Applications span a range of fluid transport needs. It’s suitable for water supply and irrigation systems, as well as other MDPE-based piping setups where a branch off a 25mm line is needed. Its corrosion resistance supports longevity in residential environments and outdoor installations, where exposure to moisture and chlorinated water is common. Why choose this MDPE compression tee? It combines a 25mm MDPE pipe interface with a standard 3/4" BSPF outlet, enabling efficient layout changes without special tools. Its design prioritises reliability and ease of use, helping tradespeople complete branch connections quickly and with confidence, while keeping maintenance needs low over the system’s life.
Akor
MDPE Pipe Fittings
Delivery is free to Mainland England and Wales. Deliveries are chargable to Scotland.
Once the order is placed, our courier will call you within 3 working days to arrange a delivery date. If you do not hear from the courier within 3 days, please get in touch with us. The majority of deliveries are made within 7 days, occasionally a little longer during peak periods.
Deliveries are made between 08:00 and 18:00 on the day, we request the driver calls you one hour before with an advised time.
Delivery is made via a kerbside tail lift lorry, we cannot deliver to sloping ground as the tail lift must be able to lay flat.
The road must be wide enough for a lorry to fit down and free from obstruction, if there are any access restrictions, please contact us.
Deliveries must be signed for, please report any damages to us within 24 hours.
We offer all bricks with a tail lift offloading service, Please familiarise yourself with the information below.
Crane offloading is available as a premium service for some bricks.
All of our C16 and C24 graded timber is regularised
Regularised timber is timber that has been processed to have a uniform shape and size. This means that the wood has been sawn and planed to remove any irregularities and ensure that each piece of wood has consistent dimensions. Regularised timber is often used in construction, particularly in the framing of buildings, as it is easier to work with and can be more efficiently installed than irregularly shaped timber.
We have one of the largest ranges of timber lengths, dimensions and grades available to buy online.
The variation you require will determine the exact lead time and delivery method.
Most orders arrive within 3-4 days, the maximum is 7 days. Please get in touch before you order if you need a specifc delivery date.
Delivery charges vary by postcode. To find out the delivery charge, add the item(s) you require to your basket and select CALCULATE SHIPPING at the bottom of the page.
Some orders are delivered on our own vehicles based in Leicestershire and Cheshire. We also use carriers including Yodel and Tuffnells. For some sizes and locations we use regional distributors.
If you'd prefer crane offloading rather than tail lift vehicle offloading for your brick order then this service is available for the majority of bricks that we sell. Charges are shown at checkout.
For deliveries of less than 6 packs then Taillift offloading is normally a more cost effective option
Downloadable information can be found here:
Armstrong Cheshire supply the full range of Catnic Lintels. If you don't see the lintel you need on our website, choose from the Catnic Lintel Selector Brochure and give us a call 01625 322269
Downloadable information can be found here:
MDPE Tee Compression Fitting, 25mm to 3/4" BSPF, is a practical branch connector for MDPE piping systems. Designed for tradespeople and hands-on builders, it lets you split a 25mm line into a 3/4" BSP female thread at a 90-degree angle with a secure, proven connection. Key features you can rely on include a PN10 rating (up to 10 bar) and a MDPE body that offers good chemical resistance and durability. The fitting is engineered to provide leak-free joints when installed correctly and to withstand typical residential and light industrial conditions, including temperature variations and environmental exposure. This tee uses a compression connection, meaning it’s straightforward to install with no specialist equipment required. For a reliable seal, ensure the MDPE pipe is clean and fully seated in the socket, then tighten the compression nut in line with standard practice. The 3/4" BSPF thread provides a compatible port for downstream components, expanding the options for branch connections within water supply and irrigation layouts. Applications span a range of fluid transport needs. It’s suitable for water supply and irrigation systems, as well as other MDPE-based piping setups where a branch off a 25mm line is needed. Its corrosion resistance supports longevity in residential environments and outdoor installations, where exposure to moisture and chlorinated water is common. Why choose this MDPE compression tee? It combines a 25mm MDPE pipe interface with a standard 3/4" BSPF outlet, enabling efficient layout changes without special tools. Its design prioritises reliability and ease of use, helping tradespeople complete branch connections quickly and with confidence, while keeping maintenance needs low over the system’s life.
Akor
MDPE Pipe Fittings
Delivery is free to Mainland England and Wales. Deliveries are chargable to Scotland.
Once the order is placed, our courier will call you within 3 working days to arrange a delivery date. If you do not hear from the courier within 3 days, please get in touch with us. The majority of deliveries are made within 7 days, occasionally a little longer during peak periods.
Deliveries are made between 08:00 and 18:00 on the day, we request the driver calls you one hour before with an advised time.
Delivery is made via a kerbside tail lift lorry, we cannot deliver to sloping ground as the tail lift must be able to lay flat.
The road must be wide enough for a lorry to fit down and free from obstruction, if there are any access restrictions, please contact us.
Deliveries must be signed for, please report any damages to us within 24 hours.
We offer all bricks with a tail lift offloading service, Please familiarise yourself with the information below.
Crane offloading is available as a premium service for some bricks.
All of our C16 and C24 graded timber is regularised
Regularised timber is timber that has been processed to have a uniform shape and size. This means that the wood has been sawn and planed to remove any irregularities and ensure that each piece of wood has consistent dimensions. Regularised timber is often used in construction, particularly in the framing of buildings, as it is easier to work with and can be more efficiently installed than irregularly shaped timber.
We have one of the largest ranges of timber lengths, dimensions and grades available to buy online. The variation you require will determine the exact lead time and delivery method.
Most orders arrive within 3-4 days, the maximum is 7 days.
Please get in touch before you order if you need a specific delivery date.
Delivery charges vary by postcode. To find out the delivery charge, add the item(s) you require to your basket and select CALCULATE SHIPPING at the bottom of the page. Some orders are delivered on our vehicles based in Leicestershire and Cheshire. We also use carriers including Yodel and Tuffnells. For some sizes and locations, we use regional distributors.
If you'd prefer crane offloading rather than tail lift vehicle offloading for your brick order then this service is available for the majority of bricks that we sell. Charges are shown at checkout.
For deliveries of less than 6 packs then Taillift offloading is normally a more cost effective option
Downloadable information can be found here:
Armstrong Cheshire supply the full range of Catnic Lintels. If you don't see the lintel you need on our website, choose from the Catnic Lintel Selector Brochure and give us a call 01625 322269
Downloadable information can be found here:
Brick Calculator
Brick Calculator
Akor
MDPE Tee 25mm - 3/4" BSPF - 25mm
£3.00
Unit price
/
Unavailable
MDPE Tee Compression Fitting, 25mm to 3/4" BSPF, is a practical branch connector for MDPE piping systems. Designed for tradespeople and hands-on builders, it lets you split a 25mm line into a 3/4" BSP female thread at a 90-degree angle with a secure, proven connection. Key features you can rely on include a PN10 rating (up to 10 bar) and a MDPE body that offers good chemical resistance and durability. The fitting is engineered to provide leak-free joints when installed correctly and to withstand typical residential and light industrial conditions, including temperature variations and environmental exposure. This tee uses a compression connection, meaning it’s straightforward to install with no specialist equipment required. For a reliable seal, ensure the MDPE pipe is clean and fully seated in the socket, then tighten the compression nut in line with standard practice. The 3/4" BSPF thread provides a compatible port for downstream components, expanding the options for branch connections within water supply and irrigation layouts. Applications span a range of fluid transport needs. It’s suitable for water supply and irrigation systems, as well as other MDPE-based piping setups where a branch off a 25mm line is needed. Its corrosion resistance supports longevity in residential environments and outdoor installations, where exposure to moisture and chlorinated water is common. Why choose this MDPE compression tee? It combines a 25mm MDPE pipe interface with a standard 3/4" BSPF outlet, enabling efficient layout changes without special tools. Its design prioritises reliability and ease of use, helping tradespeople complete branch connections quickly and with confidence, while keeping maintenance needs low over the system’s life.
