MDPE Tee Compression Fitting 25mm to 1/2" BSPM provides a reliable branch connection for MDPE piping in water supply and irrigation setups. It takes a 25mm main line and yields a 1/2" BSP male outlet with a 90-degree branch, enabling tidy, no-wuss connections on-site. Constructed from MDPE, the fitting offers chemical and corrosion resistance suitable for domestic and light industrial environments. The compression joint seals with a nut and olive, delivering leak-free performance when installed in accordance with the manufacturer’s instructions. Rated PN10, it is designed for up to 10 bar (approximately 145 psi) at 20°C, appropriate for typical potable water and irrigation applications. Key specifications
  • Material: MDPE (Medium-Density Polyethylene)
  • Connection: 25mm pipe to 1/2" BSP Male outlet
  • Branch angle: 90°
  • Pressure rating: PN10 (10 bar) at 20°C
  • Usage: Water supply, garden irrigation, and light industrial piping
Why this matters for tradespeople - Quick, tool-friendly installation without welding or solvent bonding; compatible with standard MDPE compression olives and nuts. - A dedicated branch point from a 25mm main line to feed fixtures, taps or small irrigation lines, with a robust, long-service MDPE joint. - Versatile for outdoor and indoor installations, with good resistance to routine chemical exposure found in residential and commercial settings. Practical notes - Ensure pipe ends are cut square and de-burred before fitting. Use the correct olive size and tighten the compression nut to the manufacturer’s torque guidance to achieve a leak-free joint. - Inspect joints after pressurising; reseat if any slow leaks appear. - Suitable for systems operating within the PN10 rating; avoid exceeding temperature and pressure conditions beyond spec.
Akor
MDPE Pipe Fittings
MDPE Tee Compression Fitting 25mm to 1/2" BSPM provides a reliable branch connection for MDPE piping in water supply and irrigation setups. It takes a 25mm main line and yields a 1/2" BSP male outlet with a 90-degree branch, enabling tidy, no-wuss connections on-site. Constructed from MDPE, the fitting offers chemical and corrosion resistance suitable for domestic and light industrial environments. The compression joint seals with a nut and olive, delivering leak-free performance when installed in accordance with the manufacturer’s instructions. Rated PN10, it is designed for up to 10 bar (approximately 145 psi) at 20°C, appropriate for typical potable water and irrigation applications. Key specifications
  • Material: MDPE (Medium-Density Polyethylene)
  • Connection: 25mm pipe to 1/2" BSP Male outlet
  • Branch angle: 90°
  • Pressure rating: PN10 (10 bar) at 20°C
  • Usage: Water supply, garden irrigation, and light industrial piping
Why this matters for tradespeople - Quick, tool-friendly installation without welding or solvent bonding; compatible with standard MDPE compression olives and nuts. - A dedicated branch point from a 25mm main line to feed fixtures, taps or small irrigation lines, with a robust, long-service MDPE joint. - Versatile for outdoor and indoor installations, with good resistance to routine chemical exposure found in residential and commercial settings. Practical notes - Ensure pipe ends are cut square and de-burred before fitting. Use the correct olive size and tighten the compression nut to the manufacturer’s torque guidance to achieve a leak-free joint. - Inspect joints after pressurising; reseat if any slow leaks appear. - Suitable for systems operating within the PN10 rating; avoid exceeding temperature and pressure conditions beyond spec.
Akor
MDPE Pipe Fittings
Ex VAT Inc VAT
CALL US ON
01625 322269
Call us on 01625 322269
Trustpilot
Akor

MDPE Tee 25mm - 1/2" BSPM - 25mm

£3.00

Delivery charges will vary depending on your location.

To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode

We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.

MDPE Tee Compression Fitting 25mm to 1/2" BSPM provides a reliable branch connection for MDPE piping in water supply and irrigation setups. It takes a 25mm main line and yields a 1/2" BSP male outlet with a 90-degree branch, enabling tidy, no-wuss connections on-site. Constructed from MDPE, the fitting offers chemical and corrosion resistance suitable for domestic and light industrial environments. The compression joint seals with a nut and olive, delivering leak-free performance when installed in accordance with the manufacturer’s instructions. Rated PN10, it is designed for up to 10 bar (approximately 145 psi) at 20°C, appropriate for typical potable water and irrigation applications. Key specifications
  • Material: MDPE (Medium-Density Polyethylene)
  • Connection: 25mm pipe to 1/2" BSP Male outlet
  • Branch angle: 90°
  • Pressure rating: PN10 (10 bar) at 20°C
  • Usage: Water supply, garden irrigation, and light industrial piping
Why this matters for tradespeople - Quick, tool-friendly installation without welding or solvent bonding; compatible with standard MDPE compression olives and nuts. - A dedicated branch point from a 25mm main line to feed fixtures, taps or small irrigation lines, with a robust, long-service MDPE joint. - Versatile for outdoor and indoor installations, with good resistance to routine chemical exposure found in residential and commercial settings. Practical notes - Ensure pipe ends are cut square and de-burred before fitting. Use the correct olive size and tighten the compression nut to the manufacturer’s torque guidance to achieve a leak-free joint. - Inspect joints after pressurising; reseat if any slow leaks appear. - Suitable for systems operating within the PN10 rating; avoid exceeding temperature and pressure conditions beyond spec.

Description
MDPE Tee Compression Fitting 25mm to 1/2" BSPM provides a reliable branch connection for MDPE piping in water supply and irrigation setups. It takes a 25mm main line and yields a 1/2" BSP male outlet with a 90-degree branch, enabling tidy, no-wuss connections on-site. Constructed from MDPE, the fitting offers chemical and corrosion resistance suitable for domestic and light industrial environments. The compression joint seals with a nut and olive, delivering leak-free performance when installed in accordance with the manufacturer’s instructions. Rated PN10, it is designed for up to 10 bar (approximately 145 psi) at 20°C, appropriate for typical potable water and irrigation applications. Key specifications
  • Material: MDPE (Medium-Density Polyethylene)
  • Connection: 25mm pipe to 1/2" BSP Male outlet
  • Branch angle: 90°
  • Pressure rating: PN10 (10 bar) at 20°C
  • Usage: Water supply, garden irrigation, and light industrial piping
Why this matters for tradespeople - Quick, tool-friendly installation without welding or solvent bonding; compatible with standard MDPE compression olives and nuts. - A dedicated branch point from a 25mm main line to feed fixtures, taps or small irrigation lines, with a robust, long-service MDPE joint. - Versatile for outdoor and indoor installations, with good resistance to routine chemical exposure found in residential and commercial settings. Practical notes - Ensure pipe ends are cut square and de-burred before fitting. Use the correct olive size and tighten the compression nut to the manufacturer’s torque guidance to achieve a leak-free joint. - Inspect joints after pressurising; reseat if any slow leaks appear. - Suitable for systems operating within the PN10 rating; avoid exceeding temperature and pressure conditions beyond spec.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Have a question?

If you have any questions about our products or would like to learn more about our shipping options please feel free to contact one of our team today.

Contact Us
MDPE Tee 25mm - 1/2" BSPM - 25mm - Armstrong Cheshire
Akor

MDPE Tee 25mm - 1/2" BSPM - 25mm

£3.00
MDPE Tee Compression Fitting 25mm to 1/2" BSPM provides a reliable branch connection for MDPE piping in water supply and irrigation setups. It takes a 25mm main line and yields a 1/2" BSP male outlet with a 90-degree branch, enabling tidy, no-wuss connections on-site. Constructed from MDPE, the fitting offers chemical and corrosion resistance suitable for domestic and light industrial environments. The compression joint seals with a nut and olive, delivering leak-free performance when installed in accordance with the manufacturer’s instructions. Rated PN10, it is designed for up to 10 bar (approximately 145 psi) at 20°C, appropriate for typical potable water and irrigation applications. Key specifications
  • Material: MDPE (Medium-Density Polyethylene)
  • Connection: 25mm pipe to 1/2" BSP Male outlet
  • Branch angle: 90°
  • Pressure rating: PN10 (10 bar) at 20°C
  • Usage: Water supply, garden irrigation, and light industrial piping
Why this matters for tradespeople - Quick, tool-friendly installation without welding or solvent bonding; compatible with standard MDPE compression olives and nuts. - A dedicated branch point from a 25mm main line to feed fixtures, taps or small irrigation lines, with a robust, long-service MDPE joint. - Versatile for outdoor and indoor installations, with good resistance to routine chemical exposure found in residential and commercial settings. Practical notes - Ensure pipe ends are cut square and de-burred before fitting. Use the correct olive size and tighten the compression nut to the manufacturer’s torque guidance to achieve a leak-free joint. - Inspect joints after pressurising; reseat if any slow leaks appear. - Suitable for systems operating within the PN10 rating; avoid exceeding temperature and pressure conditions beyond spec.
View product