An MDPE Tee compression fitting that splits a 25mm MDPE line to a 1/2" BSP female outlet. Designed for water supply and irrigation work, it suits on-site tradespeople and builders needing reliable branch connections.

This Tee allows a 90-degree branch off a 25mm main, with a PN10 rating to handle up to 10 bar (about 1 MPa or 145 psi) under typical service conditions. It’s built to form a secure, leak‑free joint when installed to the manufacturer’s guidelines.

  • Connection type: compression for MDPE from 25mm to a 1/2" BSP female thread (BSPF).
  • Pressure rating: PN10, suitable for up to 10 bar in everyday water and irrigation applications.
  • Material: MDPE, offering chemical resistance and durability in outdoor and indoor environments.
  • Joint integrity: engineered to deliver leak-free joints when fitted correctly.
  • Versatility: applicable to water supply, irrigation, and broader industrial piping contexts.
  • Installability: no specialist equipment required; use standard MDPE compression practices and tighten per guidelines.

MDPE fittings provide long service life thanks to corrosion resistance and the ability to withstand temperature variations common in domestic and light commercial settings. This 25mm to 1/2" BSPF tee is well suited for creating branches off a main MDPE feed to service taps, zones in irrigation layouts, or other branches needing a 1/2" female connection on a 25mm run.

Practical guidance for use: ensure you cut the main pipe square and deburr edges, insert firmly into the compression fitting, and follow the recommended torque or hand-tightening guidance from the manufacturer. After installation, pressurise the system and inspect for any signs of leakage at the joint. This approach helps maximise reliability and minimise maintenance in busy site conditions.

Akor
MDPE Pipe Fittings

An MDPE Tee compression fitting that splits a 25mm MDPE line to a 1/2" BSP female outlet. Designed for water supply and irrigation work, it suits on-site tradespeople and builders needing reliable branch connections.

This Tee allows a 90-degree branch off a 25mm main, with a PN10 rating to handle up to 10 bar (about 1 MPa or 145 psi) under typical service conditions. It’s built to form a secure, leak‑free joint when installed to the manufacturer’s guidelines.

  • Connection type: compression for MDPE from 25mm to a 1/2" BSP female thread (BSPF).
  • Pressure rating: PN10, suitable for up to 10 bar in everyday water and irrigation applications.
  • Material: MDPE, offering chemical resistance and durability in outdoor and indoor environments.
  • Joint integrity: engineered to deliver leak-free joints when fitted correctly.
  • Versatility: applicable to water supply, irrigation, and broader industrial piping contexts.
  • Installability: no specialist equipment required; use standard MDPE compression practices and tighten per guidelines.

MDPE fittings provide long service life thanks to corrosion resistance and the ability to withstand temperature variations common in domestic and light commercial settings. This 25mm to 1/2" BSPF tee is well suited for creating branches off a main MDPE feed to service taps, zones in irrigation layouts, or other branches needing a 1/2" female connection on a 25mm run.

Practical guidance for use: ensure you cut the main pipe square and deburr edges, insert firmly into the compression fitting, and follow the recommended torque or hand-tightening guidance from the manufacturer. After installation, pressurise the system and inspect for any signs of leakage at the joint. This approach helps maximise reliability and minimise maintenance in busy site conditions.

Akor
MDPE Pipe Fittings
Ex VAT Inc VAT
CALL US ON
01625 322269
Call us on 01625 322269
Trustpilot
Akor

MDPE Tee 25mm - 1/2" BSPF - 25mm

£3.00

Delivery charges will vary depending on your location.

To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode

We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.

An MDPE Tee compression fitting that splits a 25mm MDPE line to a 1/2" BSP female outlet. Designed for water supply and irrigation work, it suits on-site tradespeople and builders needing reliable branch connections.

This Tee allows a 90-degree branch off a 25mm main, with a PN10 rating to handle up to 10 bar (about 1 MPa or 145 psi) under typical service conditions. It’s built to form a secure, leak‑free joint when installed to the manufacturer’s guidelines.

  • Connection type: compression for MDPE from 25mm to a 1/2" BSP female thread (BSPF).
  • Pressure rating: PN10, suitable for up to 10 bar in everyday water and irrigation applications.
  • Material: MDPE, offering chemical resistance and durability in outdoor and indoor environments.
  • Joint integrity: engineered to deliver leak-free joints when fitted correctly.
  • Versatility: applicable to water supply, irrigation, and broader industrial piping contexts.
  • Installability: no specialist equipment required; use standard MDPE compression practices and tighten per guidelines.

MDPE fittings provide long service life thanks to corrosion resistance and the ability to withstand temperature variations common in domestic and light commercial settings. This 25mm to 1/2" BSPF tee is well suited for creating branches off a main MDPE feed to service taps, zones in irrigation layouts, or other branches needing a 1/2" female connection on a 25mm run.

Practical guidance for use: ensure you cut the main pipe square and deburr edges, insert firmly into the compression fitting, and follow the recommended torque or hand-tightening guidance from the manufacturer. After installation, pressurise the system and inspect for any signs of leakage at the joint. This approach helps maximise reliability and minimise maintenance in busy site conditions.

Description

An MDPE Tee compression fitting that splits a 25mm MDPE line to a 1/2" BSP female outlet. Designed for water supply and irrigation work, it suits on-site tradespeople and builders needing reliable branch connections.

This Tee allows a 90-degree branch off a 25mm main, with a PN10 rating to handle up to 10 bar (about 1 MPa or 145 psi) under typical service conditions. It’s built to form a secure, leak‑free joint when installed to the manufacturer’s guidelines.

  • Connection type: compression for MDPE from 25mm to a 1/2" BSP female thread (BSPF).
  • Pressure rating: PN10, suitable for up to 10 bar in everyday water and irrigation applications.
  • Material: MDPE, offering chemical resistance and durability in outdoor and indoor environments.
  • Joint integrity: engineered to deliver leak-free joints when fitted correctly.
  • Versatility: applicable to water supply, irrigation, and broader industrial piping contexts.
  • Installability: no specialist equipment required; use standard MDPE compression practices and tighten per guidelines.

MDPE fittings provide long service life thanks to corrosion resistance and the ability to withstand temperature variations common in domestic and light commercial settings. This 25mm to 1/2" BSPF tee is well suited for creating branches off a main MDPE feed to service taps, zones in irrigation layouts, or other branches needing a 1/2" female connection on a 25mm run.

Practical guidance for use: ensure you cut the main pipe square and deburr edges, insert firmly into the compression fitting, and follow the recommended torque or hand-tightening guidance from the manufacturer. After installation, pressurise the system and inspect for any signs of leakage at the joint. This approach helps maximise reliability and minimise maintenance in busy site conditions.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Have a question?

If you have any questions about our products or would like to learn more about our shipping options please feel free to contact one of our team today.

Contact Us
MDPE Tee 25mm - 1/2" BSPF - 25mm - Armstrong Cheshire
Akor

MDPE Tee 25mm - 1/2" BSPF - 25mm

£3.00

An MDPE Tee compression fitting that splits a 25mm MDPE line to a 1/2" BSP female outlet. Designed for water supply and irrigation work, it suits on-site tradespeople and builders needing reliable branch connections.

This Tee allows a 90-degree branch off a 25mm main, with a PN10 rating to handle up to 10 bar (about 1 MPa or 145 psi) under typical service conditions. It’s built to form a secure, leak‑free joint when installed to the manufacturer’s guidelines.

  • Connection type: compression for MDPE from 25mm to a 1/2" BSP female thread (BSPF).
  • Pressure rating: PN10, suitable for up to 10 bar in everyday water and irrigation applications.
  • Material: MDPE, offering chemical resistance and durability in outdoor and indoor environments.
  • Joint integrity: engineered to deliver leak-free joints when fitted correctly.
  • Versatility: applicable to water supply, irrigation, and broader industrial piping contexts.
  • Installability: no specialist equipment required; use standard MDPE compression practices and tighten per guidelines.

MDPE fittings provide long service life thanks to corrosion resistance and the ability to withstand temperature variations common in domestic and light commercial settings. This 25mm to 1/2" BSPF tee is well suited for creating branches off a main MDPE feed to service taps, zones in irrigation layouts, or other branches needing a 1/2" female connection on a 25mm run.

Practical guidance for use: ensure you cut the main pipe square and deburr edges, insert firmly into the compression fitting, and follow the recommended torque or hand-tightening guidance from the manufacturer. After installation, pressurise the system and inspect for any signs of leakage at the joint. This approach helps maximise reliability and minimise maintenance in busy site conditions.

View product