MDPE Tee 25mm is a compression fitting designed for MDPE pipework, built for tradespeople installing water supply and irrigation lines. It provides a reliable 90-degree branch off a main run, specifically for 25mm MDPE pipe. Key specs and benefits
  • Pipe size: 25mm MDPE pipe
  • Pressure rating: PN10, meaning it is rated for up to 10 bar (approximately 1 MPa or 145 psi) under normal operating conditions
  • Material: MDPE, offering durability, flexibility and chemical resistance
  • Connection type: threaded compression connections to create a tight seal and minimise leakage when installed correctly
  • Corrosion resistance: MDPE fittings resist chemical attack and corrosion, contributing to longer service life in both indoor and outdoor environments
  • Durability: designed to withstand temperature variations and mechanical stress common in real-world piping
  • Versatility: suitable for water supply, irrigation, and other fluid transport applications
Why this matters on site - The 25mm size matches common MDPE distribution mains, enabling straightforward branching without re-sizing or adapters. - The PN10 rating provides a clear, verifiable pressure limit for domestic and light commercial systems, helping you select the right fitting for the job. - MDPE’s chemical resistance reduces maintenance needs in systems carrying treated water, fertilisers or variable weather exposure. - The compression connection design aims to deliver leak-free joints with proper installation, plus the approach is generally cost-effective and easy to deploy without specialist equipment. Practical use cases - Branching a garden irrigation line from a 25mm main run - Splitting a domestic cold water feed in a shed or outbuilding - Simple, reliable extensions in light industrial water piping where MDPE is specified Installation tips - Ensure pipe ends are clean and cut square before insertion - Insert fully into the tee’s compression connection and tighten to seal - Use compatible MDPE pipe and fittings to maintain the PN10 rating and system integrity - Check joints for leaks after pressurising; re-tighten if necessary This MDPE Tee 25mm offers a practical, field-ready solution for creating secure 90-degree branches in MDPE water and irrigation networks, with clear performance expectations and straightforward installation.
Akor
MDPE Pipe Fittings
MDPE Tee 25mm is a compression fitting designed for MDPE pipework, built for tradespeople installing water supply and irrigation lines. It provides a reliable 90-degree branch off a main run, specifically for 25mm MDPE pipe. Key specs and benefits
  • Pipe size: 25mm MDPE pipe
  • Pressure rating: PN10, meaning it is rated for up to 10 bar (approximately 1 MPa or 145 psi) under normal operating conditions
  • Material: MDPE, offering durability, flexibility and chemical resistance
  • Connection type: threaded compression connections to create a tight seal and minimise leakage when installed correctly
  • Corrosion resistance: MDPE fittings resist chemical attack and corrosion, contributing to longer service life in both indoor and outdoor environments
  • Durability: designed to withstand temperature variations and mechanical stress common in real-world piping
  • Versatility: suitable for water supply, irrigation, and other fluid transport applications
Why this matters on site - The 25mm size matches common MDPE distribution mains, enabling straightforward branching without re-sizing or adapters. - The PN10 rating provides a clear, verifiable pressure limit for domestic and light commercial systems, helping you select the right fitting for the job. - MDPE’s chemical resistance reduces maintenance needs in systems carrying treated water, fertilisers or variable weather exposure. - The compression connection design aims to deliver leak-free joints with proper installation, plus the approach is generally cost-effective and easy to deploy without specialist equipment. Practical use cases - Branching a garden irrigation line from a 25mm main run - Splitting a domestic cold water feed in a shed or outbuilding - Simple, reliable extensions in light industrial water piping where MDPE is specified Installation tips - Ensure pipe ends are clean and cut square before insertion - Insert fully into the tee’s compression connection and tighten to seal - Use compatible MDPE pipe and fittings to maintain the PN10 rating and system integrity - Check joints for leaks after pressurising; re-tighten if necessary This MDPE Tee 25mm offers a practical, field-ready solution for creating secure 90-degree branches in MDPE water and irrigation networks, with clear performance expectations and straightforward installation.
Akor
MDPE Pipe Fittings
Ex VAT Inc VAT
CALL US ON
01625 322269
Call us on 01625 322269
Trustpilot
Akor

MDPE Tee 25mm

£3.00

Delivery charges will vary depending on your location.

To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode

We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.

MDPE Tee 25mm is a compression fitting designed for MDPE pipework, built for tradespeople installing water supply and irrigation lines. It provides a reliable 90-degree branch off a main run, specifically for 25mm MDPE pipe. Key specs and benefits
  • Pipe size: 25mm MDPE pipe
  • Pressure rating: PN10, meaning it is rated for up to 10 bar (approximately 1 MPa or 145 psi) under normal operating conditions
  • Material: MDPE, offering durability, flexibility and chemical resistance
  • Connection type: threaded compression connections to create a tight seal and minimise leakage when installed correctly
  • Corrosion resistance: MDPE fittings resist chemical attack and corrosion, contributing to longer service life in both indoor and outdoor environments
  • Durability: designed to withstand temperature variations and mechanical stress common in real-world piping
  • Versatility: suitable for water supply, irrigation, and other fluid transport applications
Why this matters on site - The 25mm size matches common MDPE distribution mains, enabling straightforward branching without re-sizing or adapters. - The PN10 rating provides a clear, verifiable pressure limit for domestic and light commercial systems, helping you select the right fitting for the job. - MDPE’s chemical resistance reduces maintenance needs in systems carrying treated water, fertilisers or variable weather exposure. - The compression connection design aims to deliver leak-free joints with proper installation, plus the approach is generally cost-effective and easy to deploy without specialist equipment. Practical use cases - Branching a garden irrigation line from a 25mm main run - Splitting a domestic cold water feed in a shed or outbuilding - Simple, reliable extensions in light industrial water piping where MDPE is specified Installation tips - Ensure pipe ends are clean and cut square before insertion - Insert fully into the tee’s compression connection and tighten to seal - Use compatible MDPE pipe and fittings to maintain the PN10 rating and system integrity - Check joints for leaks after pressurising; re-tighten if necessary This MDPE Tee 25mm offers a practical, field-ready solution for creating secure 90-degree branches in MDPE water and irrigation networks, with clear performance expectations and straightforward installation.

Description
MDPE Tee 25mm is a compression fitting designed for MDPE pipework, built for tradespeople installing water supply and irrigation lines. It provides a reliable 90-degree branch off a main run, specifically for 25mm MDPE pipe. Key specs and benefits
  • Pipe size: 25mm MDPE pipe
  • Pressure rating: PN10, meaning it is rated for up to 10 bar (approximately 1 MPa or 145 psi) under normal operating conditions
  • Material: MDPE, offering durability, flexibility and chemical resistance
  • Connection type: threaded compression connections to create a tight seal and minimise leakage when installed correctly
  • Corrosion resistance: MDPE fittings resist chemical attack and corrosion, contributing to longer service life in both indoor and outdoor environments
  • Durability: designed to withstand temperature variations and mechanical stress common in real-world piping
  • Versatility: suitable for water supply, irrigation, and other fluid transport applications
Why this matters on site - The 25mm size matches common MDPE distribution mains, enabling straightforward branching without re-sizing or adapters. - The PN10 rating provides a clear, verifiable pressure limit for domestic and light commercial systems, helping you select the right fitting for the job. - MDPE’s chemical resistance reduces maintenance needs in systems carrying treated water, fertilisers or variable weather exposure. - The compression connection design aims to deliver leak-free joints with proper installation, plus the approach is generally cost-effective and easy to deploy without specialist equipment. Practical use cases - Branching a garden irrigation line from a 25mm main run - Splitting a domestic cold water feed in a shed or outbuilding - Simple, reliable extensions in light industrial water piping where MDPE is specified Installation tips - Ensure pipe ends are clean and cut square before insertion - Insert fully into the tee’s compression connection and tighten to seal - Use compatible MDPE pipe and fittings to maintain the PN10 rating and system integrity - Check joints for leaks after pressurising; re-tighten if necessary This MDPE Tee 25mm offers a practical, field-ready solution for creating secure 90-degree branches in MDPE water and irrigation networks, with clear performance expectations and straightforward installation.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Have a question?

If you have any questions about our products or would like to learn more about our shipping options please feel free to contact one of our team today.

Contact Us
MDPE Tee 25mm - Armstrong Cheshire
Akor

MDPE Tee 25mm

£3.00
MDPE Tee 25mm is a compression fitting designed for MDPE pipework, built for tradespeople installing water supply and irrigation lines. It provides a reliable 90-degree branch off a main run, specifically for 25mm MDPE pipe. Key specs and benefits
  • Pipe size: 25mm MDPE pipe
  • Pressure rating: PN10, meaning it is rated for up to 10 bar (approximately 1 MPa or 145 psi) under normal operating conditions
  • Material: MDPE, offering durability, flexibility and chemical resistance
  • Connection type: threaded compression connections to create a tight seal and minimise leakage when installed correctly
  • Corrosion resistance: MDPE fittings resist chemical attack and corrosion, contributing to longer service life in both indoor and outdoor environments
  • Durability: designed to withstand temperature variations and mechanical stress common in real-world piping
  • Versatility: suitable for water supply, irrigation, and other fluid transport applications
Why this matters on site - The 25mm size matches common MDPE distribution mains, enabling straightforward branching without re-sizing or adapters. - The PN10 rating provides a clear, verifiable pressure limit for domestic and light commercial systems, helping you select the right fitting for the job. - MDPE’s chemical resistance reduces maintenance needs in systems carrying treated water, fertilisers or variable weather exposure. - The compression connection design aims to deliver leak-free joints with proper installation, plus the approach is generally cost-effective and easy to deploy without specialist equipment. Practical use cases - Branching a garden irrigation line from a 25mm main run - Splitting a domestic cold water feed in a shed or outbuilding - Simple, reliable extensions in light industrial water piping where MDPE is specified Installation tips - Ensure pipe ends are clean and cut square before insertion - Insert fully into the tee’s compression connection and tighten to seal - Use compatible MDPE pipe and fittings to maintain the PN10 rating and system integrity - Check joints for leaks after pressurising; re-tighten if necessary This MDPE Tee 25mm offers a practical, field-ready solution for creating secure 90-degree branches in MDPE water and irrigation networks, with clear performance expectations and straightforward installation.
View product