This MDPE Tee Compression Fitting lets you take a branch off a 20mm MDPE line and tie into a 3/4" BSP female connection. Built for tradespeople, it provides a reliable, durable option for water supply and irrigation projects where a neat branch is needed.

What it is: A PN10-rated MDPE tee designed to join a 20mm MDPE pipe on the compression side and provide a 3/4" BSP female thread on the other for compatible accessories and valves. The compression end accepts 20mm MDPE pipe, while the threaded end is sized for standard BSP fittings.

  • Pressure rating: PN10 fittings are suitable for up to 10 bars (approximately 1 MPa or 145 psi) when used with the correct MDPE pipe size.
  • Material and corrosion resistance: MDPE offers chemical resistance and durability in water and irrigation environments, helping extend service life in a variety of conditions.
  • Joint integrity: Designed to create leak-free joints when installed in accordance with the fitting’s instructions; the MDPE compression connection helps secure a tight seal on the supply run.
  • Versatility: Ideal for splitting flow off a 20mm line to feed services such as taps, irrigation headers, or downstream valves without swapping to different piping.
  • Ease of installation: Suitable for on-site use by installers; the compression end is intended for straightforward connection to 20mm MDPE pipe, while the BSPF end accepts standard threaded components.

Use cases: Create a branch to power a garden tap, supply a drip irrigation header, or connect a valve off an existing 20mm MDPE run. This fitting is well-suited to routine potable water and irrigation networks where a reliable, metal-threaded connection is required at the branch point.

Tips for best results: cut the 20mm MDPE pipe square, deburr the edge, insert fully into the compression side, and tighten the nut as per manufacturer guidance. On the BSPF threaded side, connect to compatible components with the appropriate sealing method and avoid overtightening to protect the thread.

Akor
MDPE Pipe Fittings

This MDPE Tee Compression Fitting lets you take a branch off a 20mm MDPE line and tie into a 3/4" BSP female connection. Built for tradespeople, it provides a reliable, durable option for water supply and irrigation projects where a neat branch is needed.

What it is: A PN10-rated MDPE tee designed to join a 20mm MDPE pipe on the compression side and provide a 3/4" BSP female thread on the other for compatible accessories and valves. The compression end accepts 20mm MDPE pipe, while the threaded end is sized for standard BSP fittings.

  • Pressure rating: PN10 fittings are suitable for up to 10 bars (approximately 1 MPa or 145 psi) when used with the correct MDPE pipe size.
  • Material and corrosion resistance: MDPE offers chemical resistance and durability in water and irrigation environments, helping extend service life in a variety of conditions.
  • Joint integrity: Designed to create leak-free joints when installed in accordance with the fitting’s instructions; the MDPE compression connection helps secure a tight seal on the supply run.
  • Versatility: Ideal for splitting flow off a 20mm line to feed services such as taps, irrigation headers, or downstream valves without swapping to different piping.
  • Ease of installation: Suitable for on-site use by installers; the compression end is intended for straightforward connection to 20mm MDPE pipe, while the BSPF end accepts standard threaded components.

Use cases: Create a branch to power a garden tap, supply a drip irrigation header, or connect a valve off an existing 20mm MDPE run. This fitting is well-suited to routine potable water and irrigation networks where a reliable, metal-threaded connection is required at the branch point.

Tips for best results: cut the 20mm MDPE pipe square, deburr the edge, insert fully into the compression side, and tighten the nut as per manufacturer guidance. On the BSPF threaded side, connect to compatible components with the appropriate sealing method and avoid overtightening to protect the thread.

Akor
MDPE Pipe Fittings
Ex VAT Inc VAT
CALL US ON
01625 322269
Call us on 01625 322269
Trustpilot
Akor

MDPE Tee 20mm - 3/4" BSPF - 20mm

£2.00

Delivery charges will vary depending on your location.

To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode

We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.

This MDPE Tee Compression Fitting lets you take a branch off a 20mm MDPE line and tie into a 3/4" BSP female connection. Built for tradespeople, it provides a reliable, durable option for water supply and irrigation projects where a neat branch is needed.

What it is: A PN10-rated MDPE tee designed to join a 20mm MDPE pipe on the compression side and provide a 3/4" BSP female thread on the other for compatible accessories and valves. The compression end accepts 20mm MDPE pipe, while the threaded end is sized for standard BSP fittings.

  • Pressure rating: PN10 fittings are suitable for up to 10 bars (approximately 1 MPa or 145 psi) when used with the correct MDPE pipe size.
  • Material and corrosion resistance: MDPE offers chemical resistance and durability in water and irrigation environments, helping extend service life in a variety of conditions.
  • Joint integrity: Designed to create leak-free joints when installed in accordance with the fitting’s instructions; the MDPE compression connection helps secure a tight seal on the supply run.
  • Versatility: Ideal for splitting flow off a 20mm line to feed services such as taps, irrigation headers, or downstream valves without swapping to different piping.
  • Ease of installation: Suitable for on-site use by installers; the compression end is intended for straightforward connection to 20mm MDPE pipe, while the BSPF end accepts standard threaded components.

Use cases: Create a branch to power a garden tap, supply a drip irrigation header, or connect a valve off an existing 20mm MDPE run. This fitting is well-suited to routine potable water and irrigation networks where a reliable, metal-threaded connection is required at the branch point.

Tips for best results: cut the 20mm MDPE pipe square, deburr the edge, insert fully into the compression side, and tighten the nut as per manufacturer guidance. On the BSPF threaded side, connect to compatible components with the appropriate sealing method and avoid overtightening to protect the thread.

Description

This MDPE Tee Compression Fitting lets you take a branch off a 20mm MDPE line and tie into a 3/4" BSP female connection. Built for tradespeople, it provides a reliable, durable option for water supply and irrigation projects where a neat branch is needed.

What it is: A PN10-rated MDPE tee designed to join a 20mm MDPE pipe on the compression side and provide a 3/4" BSP female thread on the other for compatible accessories and valves. The compression end accepts 20mm MDPE pipe, while the threaded end is sized for standard BSP fittings.

  • Pressure rating: PN10 fittings are suitable for up to 10 bars (approximately 1 MPa or 145 psi) when used with the correct MDPE pipe size.
  • Material and corrosion resistance: MDPE offers chemical resistance and durability in water and irrigation environments, helping extend service life in a variety of conditions.
  • Joint integrity: Designed to create leak-free joints when installed in accordance with the fitting’s instructions; the MDPE compression connection helps secure a tight seal on the supply run.
  • Versatility: Ideal for splitting flow off a 20mm line to feed services such as taps, irrigation headers, or downstream valves without swapping to different piping.
  • Ease of installation: Suitable for on-site use by installers; the compression end is intended for straightforward connection to 20mm MDPE pipe, while the BSPF end accepts standard threaded components.

Use cases: Create a branch to power a garden tap, supply a drip irrigation header, or connect a valve off an existing 20mm MDPE run. This fitting is well-suited to routine potable water and irrigation networks where a reliable, metal-threaded connection is required at the branch point.

Tips for best results: cut the 20mm MDPE pipe square, deburr the edge, insert fully into the compression side, and tighten the nut as per manufacturer guidance. On the BSPF threaded side, connect to compatible components with the appropriate sealing method and avoid overtightening to protect the thread.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Have a question?

If you have any questions about our products or would like to learn more about our shipping options please feel free to contact one of our team today.

Contact Us
MDPE Tee 20mm - 3/4" BSPF - 20mm - Armstrong Cheshire
Akor

MDPE Tee 20mm - 3/4" BSPF - 20mm

£2.00

This MDPE Tee Compression Fitting lets you take a branch off a 20mm MDPE line and tie into a 3/4" BSP female connection. Built for tradespeople, it provides a reliable, durable option for water supply and irrigation projects where a neat branch is needed.

What it is: A PN10-rated MDPE tee designed to join a 20mm MDPE pipe on the compression side and provide a 3/4" BSP female thread on the other for compatible accessories and valves. The compression end accepts 20mm MDPE pipe, while the threaded end is sized for standard BSP fittings.

  • Pressure rating: PN10 fittings are suitable for up to 10 bars (approximately 1 MPa or 145 psi) when used with the correct MDPE pipe size.
  • Material and corrosion resistance: MDPE offers chemical resistance and durability in water and irrigation environments, helping extend service life in a variety of conditions.
  • Joint integrity: Designed to create leak-free joints when installed in accordance with the fitting’s instructions; the MDPE compression connection helps secure a tight seal on the supply run.
  • Versatility: Ideal for splitting flow off a 20mm line to feed services such as taps, irrigation headers, or downstream valves without swapping to different piping.
  • Ease of installation: Suitable for on-site use by installers; the compression end is intended for straightforward connection to 20mm MDPE pipe, while the BSPF end accepts standard threaded components.

Use cases: Create a branch to power a garden tap, supply a drip irrigation header, or connect a valve off an existing 20mm MDPE run. This fitting is well-suited to routine potable water and irrigation networks where a reliable, metal-threaded connection is required at the branch point.

Tips for best results: cut the 20mm MDPE pipe square, deburr the edge, insert fully into the compression side, and tighten the nut as per manufacturer guidance. On the BSPF threaded side, connect to compatible components with the appropriate sealing method and avoid overtightening to protect the thread.

View product