MDPE Straight Joiner Reducing 32mm - 25mm is a compression fitting that lets you connect a 32mm MDPE pipe to a 25mm MDPE pipe. Designed for water supply and irrigation projects, it delivers secure, leak-free joints with straightforward installation.
  • Material: MDPE (Medium-Density Polyethylene) for durability and chemical resistance.
  • Connection type: Compression fitting with threaded compression to seal the joint.
  • Sizes: Reduces from 32mm to 25mm to pair different MDPE pipe sizes in a single fitting.
  • Pressure rating: PN10, suitable for up to 10 bar (approximately 1 MPa or 145 psi) in compliant systems.
  • Applications: Ideal for domestic water supply and garden irrigation where MDPE piping is used.
  • Durability: MDPE fittings are designed to withstand temperature variations and outdoor exposure, offering long service life when installed correctly.
This reducer connector is purpose-built to create smooth, reliable transitions between pipe sizes, minimising flow disruption in run lengths that require a change from 32mm to 25mm. Its MDPE composition provides chemical resistance typical of potable water systems and irrigation networks, helping resist corrosion from common substances encountered in household and garden installations. The PN10 rating confirms suitability for standard pressure systems found in most residential and light commercial layouts. What this means for you: - Faster installs without solvent welding or heat fusion, reducing downtime on site. - Safer, leak-free joints when the fitting is properly tightened and the pipe is cut cleanly and squarely. - Versatility across multiple projects, from upgrading a home water supply to expanding a drip or sprinkler irrigation network. Tips for best results: - Prepare pipes by cutting square and deburring the ends before insertion. - Ensure the 32mm and 25mm pipes are fully seated to the correct depth for a full seal. - Tighten the compression nuts evenly with a suitable spanner; do not over-tighten, which can damage the olive or pipe. - Use with MDPE pipe and adapt to PN10 systems only where appropriate. Engineered for tradespeople and hands-on builders, this MDPE straight reducer provides a dependable, cost-effective solution for joining different MDPE sizes within water and irrigation networks.
Akor
MDPE Pipe Fittings
MDPE Straight Joiner Reducing 32mm - 25mm is a compression fitting that lets you connect a 32mm MDPE pipe to a 25mm MDPE pipe. Designed for water supply and irrigation projects, it delivers secure, leak-free joints with straightforward installation.
  • Material: MDPE (Medium-Density Polyethylene) for durability and chemical resistance.
  • Connection type: Compression fitting with threaded compression to seal the joint.
  • Sizes: Reduces from 32mm to 25mm to pair different MDPE pipe sizes in a single fitting.
  • Pressure rating: PN10, suitable for up to 10 bar (approximately 1 MPa or 145 psi) in compliant systems.
  • Applications: Ideal for domestic water supply and garden irrigation where MDPE piping is used.
  • Durability: MDPE fittings are designed to withstand temperature variations and outdoor exposure, offering long service life when installed correctly.
This reducer connector is purpose-built to create smooth, reliable transitions between pipe sizes, minimising flow disruption in run lengths that require a change from 32mm to 25mm. Its MDPE composition provides chemical resistance typical of potable water systems and irrigation networks, helping resist corrosion from common substances encountered in household and garden installations. The PN10 rating confirms suitability for standard pressure systems found in most residential and light commercial layouts. What this means for you: - Faster installs without solvent welding or heat fusion, reducing downtime on site. - Safer, leak-free joints when the fitting is properly tightened and the pipe is cut cleanly and squarely. - Versatility across multiple projects, from upgrading a home water supply to expanding a drip or sprinkler irrigation network. Tips for best results: - Prepare pipes by cutting square and deburring the ends before insertion. - Ensure the 32mm and 25mm pipes are fully seated to the correct depth for a full seal. - Tighten the compression nuts evenly with a suitable spanner; do not over-tighten, which can damage the olive or pipe. - Use with MDPE pipe and adapt to PN10 systems only where appropriate. Engineered for tradespeople and hands-on builders, this MDPE straight reducer provides a dependable, cost-effective solution for joining different MDPE sizes within water and irrigation networks.
Akor
MDPE Pipe Fittings
Ex VAT Inc VAT
CALL US ON
01625 322269
Call us on 01625 322269
Trustpilot
Akor

MDPE Straight Joiner Reducing 32mm - 25mm

£3.00

Delivery charges will vary depending on your location.

To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode

We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.

MDPE Straight Joiner Reducing 32mm - 25mm is a compression fitting that lets you connect a 32mm MDPE pipe to a 25mm MDPE pipe. Designed for water supply and irrigation projects, it delivers secure, leak-free joints with straightforward installation.
  • Material: MDPE (Medium-Density Polyethylene) for durability and chemical resistance.
  • Connection type: Compression fitting with threaded compression to seal the joint.
  • Sizes: Reduces from 32mm to 25mm to pair different MDPE pipe sizes in a single fitting.
  • Pressure rating: PN10, suitable for up to 10 bar (approximately 1 MPa or 145 psi) in compliant systems.
  • Applications: Ideal for domestic water supply and garden irrigation where MDPE piping is used.
  • Durability: MDPE fittings are designed to withstand temperature variations and outdoor exposure, offering long service life when installed correctly.
This reducer connector is purpose-built to create smooth, reliable transitions between pipe sizes, minimising flow disruption in run lengths that require a change from 32mm to 25mm. Its MDPE composition provides chemical resistance typical of potable water systems and irrigation networks, helping resist corrosion from common substances encountered in household and garden installations. The PN10 rating confirms suitability for standard pressure systems found in most residential and light commercial layouts. What this means for you: - Faster installs without solvent welding or heat fusion, reducing downtime on site. - Safer, leak-free joints when the fitting is properly tightened and the pipe is cut cleanly and squarely. - Versatility across multiple projects, from upgrading a home water supply to expanding a drip or sprinkler irrigation network. Tips for best results: - Prepare pipes by cutting square and deburring the ends before insertion. - Ensure the 32mm and 25mm pipes are fully seated to the correct depth for a full seal. - Tighten the compression nuts evenly with a suitable spanner; do not over-tighten, which can damage the olive or pipe. - Use with MDPE pipe and adapt to PN10 systems only where appropriate. Engineered for tradespeople and hands-on builders, this MDPE straight reducer provides a dependable, cost-effective solution for joining different MDPE sizes within water and irrigation networks.

Description
MDPE Straight Joiner Reducing 32mm - 25mm is a compression fitting that lets you connect a 32mm MDPE pipe to a 25mm MDPE pipe. Designed for water supply and irrigation projects, it delivers secure, leak-free joints with straightforward installation.
  • Material: MDPE (Medium-Density Polyethylene) for durability and chemical resistance.
  • Connection type: Compression fitting with threaded compression to seal the joint.
  • Sizes: Reduces from 32mm to 25mm to pair different MDPE pipe sizes in a single fitting.
  • Pressure rating: PN10, suitable for up to 10 bar (approximately 1 MPa or 145 psi) in compliant systems.
  • Applications: Ideal for domestic water supply and garden irrigation where MDPE piping is used.
  • Durability: MDPE fittings are designed to withstand temperature variations and outdoor exposure, offering long service life when installed correctly.
This reducer connector is purpose-built to create smooth, reliable transitions between pipe sizes, minimising flow disruption in run lengths that require a change from 32mm to 25mm. Its MDPE composition provides chemical resistance typical of potable water systems and irrigation networks, helping resist corrosion from common substances encountered in household and garden installations. The PN10 rating confirms suitability for standard pressure systems found in most residential and light commercial layouts. What this means for you: - Faster installs without solvent welding or heat fusion, reducing downtime on site. - Safer, leak-free joints when the fitting is properly tightened and the pipe is cut cleanly and squarely. - Versatility across multiple projects, from upgrading a home water supply to expanding a drip or sprinkler irrigation network. Tips for best results: - Prepare pipes by cutting square and deburring the ends before insertion. - Ensure the 32mm and 25mm pipes are fully seated to the correct depth for a full seal. - Tighten the compression nuts evenly with a suitable spanner; do not over-tighten, which can damage the olive or pipe. - Use with MDPE pipe and adapt to PN10 systems only where appropriate. Engineered for tradespeople and hands-on builders, this MDPE straight reducer provides a dependable, cost-effective solution for joining different MDPE sizes within water and irrigation networks.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Have a question?

If you have any questions about our products or would like to learn more about our shipping options please feel free to contact one of our team today.

Contact Us
MDPE Straight Joiner Reducing 32mm - 25mm - Armstrong Cheshire
Akor

MDPE Straight Joiner Reducing 32mm - 25mm

£3.00
MDPE Straight Joiner Reducing 32mm - 25mm is a compression fitting that lets you connect a 32mm MDPE pipe to a 25mm MDPE pipe. Designed for water supply and irrigation projects, it delivers secure, leak-free joints with straightforward installation.
  • Material: MDPE (Medium-Density Polyethylene) for durability and chemical resistance.
  • Connection type: Compression fitting with threaded compression to seal the joint.
  • Sizes: Reduces from 32mm to 25mm to pair different MDPE pipe sizes in a single fitting.
  • Pressure rating: PN10, suitable for up to 10 bar (approximately 1 MPa or 145 psi) in compliant systems.
  • Applications: Ideal for domestic water supply and garden irrigation where MDPE piping is used.
  • Durability: MDPE fittings are designed to withstand temperature variations and outdoor exposure, offering long service life when installed correctly.
This reducer connector is purpose-built to create smooth, reliable transitions between pipe sizes, minimising flow disruption in run lengths that require a change from 32mm to 25mm. Its MDPE composition provides chemical resistance typical of potable water systems and irrigation networks, helping resist corrosion from common substances encountered in household and garden installations. The PN10 rating confirms suitability for standard pressure systems found in most residential and light commercial layouts. What this means for you: - Faster installs without solvent welding or heat fusion, reducing downtime on site. - Safer, leak-free joints when the fitting is properly tightened and the pipe is cut cleanly and squarely. - Versatility across multiple projects, from upgrading a home water supply to expanding a drip or sprinkler irrigation network. Tips for best results: - Prepare pipes by cutting square and deburring the ends before insertion. - Ensure the 32mm and 25mm pipes are fully seated to the correct depth for a full seal. - Tighten the compression nuts evenly with a suitable spanner; do not over-tighten, which can damage the olive or pipe. - Use with MDPE pipe and adapt to PN10 systems only where appropriate. Engineered for tradespeople and hands-on builders, this MDPE straight reducer provides a dependable, cost-effective solution for joining different MDPE sizes within water and irrigation networks.
View product