This MDPE Straight Joiner Reducer connects a 32mm MDPE pipe to a 20mm MDPE pipe using a compression fitting, designed for water supply and irrigation work. It provides a secure, leak‑tight transition when installed correctly.

  • Material: MDPE (Medium‑Density Polyethylene) offers durability and chemical resistance.
  • Size: reducing connector from 32mm to 20mm to suit key MDPE piping configurations.
  • Connection type: compression fitting for a secure seal without welding; ensure pipe ends are cut square and deburred.
  • Pressure rating: PN10, suitable for systems up to 10 bar (approximately 1 MPa or 145 psi).
  • Corrosion and chemical resistance: MDPE resists common chemicals, helping extend service life in domestic and irrigation environments.
  • Durability: designed to withstand temperature variation and mechanical stresses in outdoor and utility installations.
  • Applications: ideal for water supply, irrigation and general MDPE piping networks where a 32mm to 20mm transition is required.

Practical use: cut pipes square, deburr the edges, slide the compression nut and olive onto the 32mm pipe, insert fully into the reducer and tighten the nut to seal. Always depressurise the system before assembly and verify the operating pressure aligns with the PN10 rating.

Designed for tradespeople, builders and maintenance teams, this reducer offers a reliable, cost‑effective way to re‑size MDPE runs without the need for welding. It fits neatly into retrofit projects and new installations alike, helping you maintain flow and integrity across water and irrigation networks.

Akor
MDPE Pipe Fittings

This MDPE Straight Joiner Reducer connects a 32mm MDPE pipe to a 20mm MDPE pipe using a compression fitting, designed for water supply and irrigation work. It provides a secure, leak‑tight transition when installed correctly.

  • Material: MDPE (Medium‑Density Polyethylene) offers durability and chemical resistance.
  • Size: reducing connector from 32mm to 20mm to suit key MDPE piping configurations.
  • Connection type: compression fitting for a secure seal without welding; ensure pipe ends are cut square and deburred.
  • Pressure rating: PN10, suitable for systems up to 10 bar (approximately 1 MPa or 145 psi).
  • Corrosion and chemical resistance: MDPE resists common chemicals, helping extend service life in domestic and irrigation environments.
  • Durability: designed to withstand temperature variation and mechanical stresses in outdoor and utility installations.
  • Applications: ideal for water supply, irrigation and general MDPE piping networks where a 32mm to 20mm transition is required.

Practical use: cut pipes square, deburr the edges, slide the compression nut and olive onto the 32mm pipe, insert fully into the reducer and tighten the nut to seal. Always depressurise the system before assembly and verify the operating pressure aligns with the PN10 rating.

Designed for tradespeople, builders and maintenance teams, this reducer offers a reliable, cost‑effective way to re‑size MDPE runs without the need for welding. It fits neatly into retrofit projects and new installations alike, helping you maintain flow and integrity across water and irrigation networks.

Akor
MDPE Pipe Fittings
Ex VAT Inc VAT
CALL US ON
01625 322269
Call us on 01625 322269
Trustpilot
Akor

MDPE Straight Joiner Reducing 32mm - 20mm

£3.00

Delivery charges will vary depending on your location.

To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode

We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.

This MDPE Straight Joiner Reducer connects a 32mm MDPE pipe to a 20mm MDPE pipe using a compression fitting, designed for water supply and irrigation work. It provides a secure, leak‑tight transition when installed correctly.

  • Material: MDPE (Medium‑Density Polyethylene) offers durability and chemical resistance.
  • Size: reducing connector from 32mm to 20mm to suit key MDPE piping configurations.
  • Connection type: compression fitting for a secure seal without welding; ensure pipe ends are cut square and deburred.
  • Pressure rating: PN10, suitable for systems up to 10 bar (approximately 1 MPa or 145 psi).
  • Corrosion and chemical resistance: MDPE resists common chemicals, helping extend service life in domestic and irrigation environments.
  • Durability: designed to withstand temperature variation and mechanical stresses in outdoor and utility installations.
  • Applications: ideal for water supply, irrigation and general MDPE piping networks where a 32mm to 20mm transition is required.

Practical use: cut pipes square, deburr the edges, slide the compression nut and olive onto the 32mm pipe, insert fully into the reducer and tighten the nut to seal. Always depressurise the system before assembly and verify the operating pressure aligns with the PN10 rating.

Designed for tradespeople, builders and maintenance teams, this reducer offers a reliable, cost‑effective way to re‑size MDPE runs without the need for welding. It fits neatly into retrofit projects and new installations alike, helping you maintain flow and integrity across water and irrigation networks.

Description

This MDPE Straight Joiner Reducer connects a 32mm MDPE pipe to a 20mm MDPE pipe using a compression fitting, designed for water supply and irrigation work. It provides a secure, leak‑tight transition when installed correctly.

  • Material: MDPE (Medium‑Density Polyethylene) offers durability and chemical resistance.
  • Size: reducing connector from 32mm to 20mm to suit key MDPE piping configurations.
  • Connection type: compression fitting for a secure seal without welding; ensure pipe ends are cut square and deburred.
  • Pressure rating: PN10, suitable for systems up to 10 bar (approximately 1 MPa or 145 psi).
  • Corrosion and chemical resistance: MDPE resists common chemicals, helping extend service life in domestic and irrigation environments.
  • Durability: designed to withstand temperature variation and mechanical stresses in outdoor and utility installations.
  • Applications: ideal for water supply, irrigation and general MDPE piping networks where a 32mm to 20mm transition is required.

Practical use: cut pipes square, deburr the edges, slide the compression nut and olive onto the 32mm pipe, insert fully into the reducer and tighten the nut to seal. Always depressurise the system before assembly and verify the operating pressure aligns with the PN10 rating.

Designed for tradespeople, builders and maintenance teams, this reducer offers a reliable, cost‑effective way to re‑size MDPE runs without the need for welding. It fits neatly into retrofit projects and new installations alike, helping you maintain flow and integrity across water and irrigation networks.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Have a question?

If you have any questions about our products or would like to learn more about our shipping options please feel free to contact one of our team today.

Contact Us
MDPE Straight Joiner Reducing 32mm - 20mm - Armstrong Cheshire
Akor

MDPE Straight Joiner Reducing 32mm - 20mm

£3.00

This MDPE Straight Joiner Reducer connects a 32mm MDPE pipe to a 20mm MDPE pipe using a compression fitting, designed for water supply and irrigation work. It provides a secure, leak‑tight transition when installed correctly.

  • Material: MDPE (Medium‑Density Polyethylene) offers durability and chemical resistance.
  • Size: reducing connector from 32mm to 20mm to suit key MDPE piping configurations.
  • Connection type: compression fitting for a secure seal without welding; ensure pipe ends are cut square and deburred.
  • Pressure rating: PN10, suitable for systems up to 10 bar (approximately 1 MPa or 145 psi).
  • Corrosion and chemical resistance: MDPE resists common chemicals, helping extend service life in domestic and irrigation environments.
  • Durability: designed to withstand temperature variation and mechanical stresses in outdoor and utility installations.
  • Applications: ideal for water supply, irrigation and general MDPE piping networks where a 32mm to 20mm transition is required.

Practical use: cut pipes square, deburr the edges, slide the compression nut and olive onto the 32mm pipe, insert fully into the reducer and tighten the nut to seal. Always depressurise the system before assembly and verify the operating pressure aligns with the PN10 rating.

Designed for tradespeople, builders and maintenance teams, this reducer offers a reliable, cost‑effective way to re‑size MDPE runs without the need for welding. It fits neatly into retrofit projects and new installations alike, helping you maintain flow and integrity across water and irrigation networks.

View product