The MDPE Straight Joiner 50mm to 2" BSPM is a compression fitting that links a 50mm MDPE pipe to a 2" BSP male thread. It’s aimed at plumbers, installers and builders seeking reliable inline connections for water supply and irrigation networks.

Designed to work with MDPE piping, this straight connector enables a direct, in-line join without changing direction. The compression connection helps create a tight seal when properly installed, minimising the risk of leaks in routine service conditions.

  • Pressure rating: PN10, suitable for systems up to 10 bar (approximately 1 MPa) under typical operating conditions.
  • Material and corrosion resistance: Made from MDPE, offering natural resistance to chemical attack and robustness in harsh environmental conditions.
  • Leak-free joints: Engineered to deliver reliable seals at the MDPE pipe interface when tightened to the recommended specification.
  • Durability: MDPE fittings are designed to withstand temperature variation and mechanical stresses in both outdoor and indoor installations.
  • Versatility: Suitable for water supply, irrigation and general industrial piping where a transition to a threaded component is required.
  • Ease of installation: No specialist tools are typically needed for a standard compression connection, making it practical for on-site applications.

Use this joiner to connect a 50mm MDPE line to a 2" BSP male threaded outlet, enabling compatible integration with threaded fittings or components in your system. Ensure the PN10 rating aligns with your project requirements and follow best-practice installation to achieve a reliable, leak-free joint. For best results, verify pipe cut square, clean and fully seated in the compression end, and tighten to the manufacturer’s guidelines.

Akor
MDPE Pipe Fittings

The MDPE Straight Joiner 50mm to 2" BSPM is a compression fitting that links a 50mm MDPE pipe to a 2" BSP male thread. It’s aimed at plumbers, installers and builders seeking reliable inline connections for water supply and irrigation networks.

Designed to work with MDPE piping, this straight connector enables a direct, in-line join without changing direction. The compression connection helps create a tight seal when properly installed, minimising the risk of leaks in routine service conditions.

  • Pressure rating: PN10, suitable for systems up to 10 bar (approximately 1 MPa) under typical operating conditions.
  • Material and corrosion resistance: Made from MDPE, offering natural resistance to chemical attack and robustness in harsh environmental conditions.
  • Leak-free joints: Engineered to deliver reliable seals at the MDPE pipe interface when tightened to the recommended specification.
  • Durability: MDPE fittings are designed to withstand temperature variation and mechanical stresses in both outdoor and indoor installations.
  • Versatility: Suitable for water supply, irrigation and general industrial piping where a transition to a threaded component is required.
  • Ease of installation: No specialist tools are typically needed for a standard compression connection, making it practical for on-site applications.

Use this joiner to connect a 50mm MDPE line to a 2" BSP male threaded outlet, enabling compatible integration with threaded fittings or components in your system. Ensure the PN10 rating aligns with your project requirements and follow best-practice installation to achieve a reliable, leak-free joint. For best results, verify pipe cut square, clean and fully seated in the compression end, and tighten to the manufacturer’s guidelines.

Akor
MDPE Pipe Fittings
Ex VAT Inc VAT
CALL US ON
01625 322269
Call us on 01625 322269
Trustpilot
Akor

MDPE Straight Joiner 50mm - 2" BSPM

£5.00

Delivery charges will vary depending on your location.

To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode

We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.

The MDPE Straight Joiner 50mm to 2" BSPM is a compression fitting that links a 50mm MDPE pipe to a 2" BSP male thread. It’s aimed at plumbers, installers and builders seeking reliable inline connections for water supply and irrigation networks.

Designed to work with MDPE piping, this straight connector enables a direct, in-line join without changing direction. The compression connection helps create a tight seal when properly installed, minimising the risk of leaks in routine service conditions.

  • Pressure rating: PN10, suitable for systems up to 10 bar (approximately 1 MPa) under typical operating conditions.
  • Material and corrosion resistance: Made from MDPE, offering natural resistance to chemical attack and robustness in harsh environmental conditions.
  • Leak-free joints: Engineered to deliver reliable seals at the MDPE pipe interface when tightened to the recommended specification.
  • Durability: MDPE fittings are designed to withstand temperature variation and mechanical stresses in both outdoor and indoor installations.
  • Versatility: Suitable for water supply, irrigation and general industrial piping where a transition to a threaded component is required.
  • Ease of installation: No specialist tools are typically needed for a standard compression connection, making it practical for on-site applications.

Use this joiner to connect a 50mm MDPE line to a 2" BSP male threaded outlet, enabling compatible integration with threaded fittings or components in your system. Ensure the PN10 rating aligns with your project requirements and follow best-practice installation to achieve a reliable, leak-free joint. For best results, verify pipe cut square, clean and fully seated in the compression end, and tighten to the manufacturer’s guidelines.

Description

The MDPE Straight Joiner 50mm to 2" BSPM is a compression fitting that links a 50mm MDPE pipe to a 2" BSP male thread. It’s aimed at plumbers, installers and builders seeking reliable inline connections for water supply and irrigation networks.

Designed to work with MDPE piping, this straight connector enables a direct, in-line join without changing direction. The compression connection helps create a tight seal when properly installed, minimising the risk of leaks in routine service conditions.

  • Pressure rating: PN10, suitable for systems up to 10 bar (approximately 1 MPa) under typical operating conditions.
  • Material and corrosion resistance: Made from MDPE, offering natural resistance to chemical attack and robustness in harsh environmental conditions.
  • Leak-free joints: Engineered to deliver reliable seals at the MDPE pipe interface when tightened to the recommended specification.
  • Durability: MDPE fittings are designed to withstand temperature variation and mechanical stresses in both outdoor and indoor installations.
  • Versatility: Suitable for water supply, irrigation and general industrial piping where a transition to a threaded component is required.
  • Ease of installation: No specialist tools are typically needed for a standard compression connection, making it practical for on-site applications.

Use this joiner to connect a 50mm MDPE line to a 2" BSP male threaded outlet, enabling compatible integration with threaded fittings or components in your system. Ensure the PN10 rating aligns with your project requirements and follow best-practice installation to achieve a reliable, leak-free joint. For best results, verify pipe cut square, clean and fully seated in the compression end, and tighten to the manufacturer’s guidelines.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Have a question?

If you have any questions about our products or would like to learn more about our shipping options please feel free to contact one of our team today.

Contact Us
MDPE Straight Joiner 50mm - 2" BSPM - Armstrong Cheshire
Akor

MDPE Straight Joiner 50mm - 2" BSPM

£5.00

The MDPE Straight Joiner 50mm to 2" BSPM is a compression fitting that links a 50mm MDPE pipe to a 2" BSP male thread. It’s aimed at plumbers, installers and builders seeking reliable inline connections for water supply and irrigation networks.

Designed to work with MDPE piping, this straight connector enables a direct, in-line join without changing direction. The compression connection helps create a tight seal when properly installed, minimising the risk of leaks in routine service conditions.

  • Pressure rating: PN10, suitable for systems up to 10 bar (approximately 1 MPa) under typical operating conditions.
  • Material and corrosion resistance: Made from MDPE, offering natural resistance to chemical attack and robustness in harsh environmental conditions.
  • Leak-free joints: Engineered to deliver reliable seals at the MDPE pipe interface when tightened to the recommended specification.
  • Durability: MDPE fittings are designed to withstand temperature variation and mechanical stresses in both outdoor and indoor installations.
  • Versatility: Suitable for water supply, irrigation and general industrial piping where a transition to a threaded component is required.
  • Ease of installation: No specialist tools are typically needed for a standard compression connection, making it practical for on-site applications.

Use this joiner to connect a 50mm MDPE line to a 2" BSP male threaded outlet, enabling compatible integration with threaded fittings or components in your system. Ensure the PN10 rating aligns with your project requirements and follow best-practice installation to achieve a reliable, leak-free joint. For best results, verify pipe cut square, clean and fully seated in the compression end, and tighten to the manufacturer’s guidelines.

View product