MDPE Straight Joiner 50mm - 1.5" BSPM is a compression fitting that links a 50mm MDPE pipe to a 1.5" BSP male thread. Designed for plumbers, contractors and hands‑on trades, it provides a straightforward, straight connection for water supply, irrigation and industrial piping. This MDPE straight connector uses a compression mechanism to create a leak‑tight joint when installed following the manufacturer’s guidelines. The MDPE material offers good chemical resistance and durability, making it suitable for systems exposed to varying temperatures and outdoor conditions. The PN10 rating means the fitting is designed to withstand up to 10 bar of pressure, which aligns with many domestic and light commercial water systems. Key specifications and benefits
  • Pipe and thread compatibility: adapts from 50mm MDPE pipe to a 1.5" BSP male thread (BSPM), enabling straightforward size changes in line with typical UK pipework layouts.
  • Pressure rating: PN10 PE fittings rated for up to 10 bar, suitable for potable water and irrigation mains within normal residential and commercial installations.
  • Material and chemistry: MDPE offers good chemical resistance and mechanical strength while remaining flexible enough for thermal expansion and contraction in outdoor or exposed locations.
  • Sealing and joints: compression connections are designed to form leak‑free joints when installed correctly and with the appropriate seals and olives as specified for the product line.
  • Durability and lifecycle: MDPE fittings are known for long service life under varying weather conditions and mechanical stress, reducing maintenance needs over time.
  • Versatility: suitable for water supply, irrigation, and general industrial piping; can be used in both indoor and outdoor settings, subject to system design and local codes.
  • Installation approach: intended for straightforward assembly with standard MDPE pipe tools; no specialist equipment beyond typical pipework tooling is required.
Practical use tips
  1. Cut and deburr the 50mm MDPE pipe squarely before fitting.
  2. Clean the pipe ends to ensure a clean seating for the compression nut and olive.
  3. Do not exceed manufacturer torque recommendations when tightening the compression nut to avoid overtightening or joint damage.
  4. Ensure the BSPM thread is clean and aligned to avoid cross‑threading; tighten to the recommended specification.
For tradespeople needing a reliable method to bridge 50mm MDPE with BSP threads, this straight joiner offers a clear, practical solution that keeps line integrity and flow consistent across application scopes.
Akor
MDPE Pipe Fittings
MDPE Straight Joiner 50mm - 1.5" BSPM is a compression fitting that links a 50mm MDPE pipe to a 1.5" BSP male thread. Designed for plumbers, contractors and hands‑on trades, it provides a straightforward, straight connection for water supply, irrigation and industrial piping. This MDPE straight connector uses a compression mechanism to create a leak‑tight joint when installed following the manufacturer’s guidelines. The MDPE material offers good chemical resistance and durability, making it suitable for systems exposed to varying temperatures and outdoor conditions. The PN10 rating means the fitting is designed to withstand up to 10 bar of pressure, which aligns with many domestic and light commercial water systems. Key specifications and benefits
  • Pipe and thread compatibility: adapts from 50mm MDPE pipe to a 1.5" BSP male thread (BSPM), enabling straightforward size changes in line with typical UK pipework layouts.
  • Pressure rating: PN10 PE fittings rated for up to 10 bar, suitable for potable water and irrigation mains within normal residential and commercial installations.
  • Material and chemistry: MDPE offers good chemical resistance and mechanical strength while remaining flexible enough for thermal expansion and contraction in outdoor or exposed locations.
  • Sealing and joints: compression connections are designed to form leak‑free joints when installed correctly and with the appropriate seals and olives as specified for the product line.
  • Durability and lifecycle: MDPE fittings are known for long service life under varying weather conditions and mechanical stress, reducing maintenance needs over time.
  • Versatility: suitable for water supply, irrigation, and general industrial piping; can be used in both indoor and outdoor settings, subject to system design and local codes.
  • Installation approach: intended for straightforward assembly with standard MDPE pipe tools; no specialist equipment beyond typical pipework tooling is required.
Practical use tips
  1. Cut and deburr the 50mm MDPE pipe squarely before fitting.
  2. Clean the pipe ends to ensure a clean seating for the compression nut and olive.
  3. Do not exceed manufacturer torque recommendations when tightening the compression nut to avoid overtightening or joint damage.
  4. Ensure the BSPM thread is clean and aligned to avoid cross‑threading; tighten to the recommended specification.
For tradespeople needing a reliable method to bridge 50mm MDPE with BSP threads, this straight joiner offers a clear, practical solution that keeps line integrity and flow consistent across application scopes.
Akor
MDPE Pipe Fittings
Ex VAT Inc VAT
CALL US ON
01625 322269
Call us on 01625 322269
Trustpilot
Akor

MDPE Straight Joiner 50mm - 1.5" BSPM

£4.00

Delivery charges will vary depending on your location.

To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode

We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.

MDPE Straight Joiner 50mm - 1.5" BSPM is a compression fitting that links a 50mm MDPE pipe to a 1.5" BSP male thread. Designed for plumbers, contractors and hands‑on trades, it provides a straightforward, straight connection for water supply, irrigation and industrial piping. This MDPE straight connector uses a compression mechanism to create a leak‑tight joint when installed following the manufacturer’s guidelines. The MDPE material offers good chemical resistance and durability, making it suitable for systems exposed to varying temperatures and outdoor conditions. The PN10 rating means the fitting is designed to withstand up to 10 bar of pressure, which aligns with many domestic and light commercial water systems. Key specifications and benefits
  • Pipe and thread compatibility: adapts from 50mm MDPE pipe to a 1.5" BSP male thread (BSPM), enabling straightforward size changes in line with typical UK pipework layouts.
  • Pressure rating: PN10 PE fittings rated for up to 10 bar, suitable for potable water and irrigation mains within normal residential and commercial installations.
  • Material and chemistry: MDPE offers good chemical resistance and mechanical strength while remaining flexible enough for thermal expansion and contraction in outdoor or exposed locations.
  • Sealing and joints: compression connections are designed to form leak‑free joints when installed correctly and with the appropriate seals and olives as specified for the product line.
  • Durability and lifecycle: MDPE fittings are known for long service life under varying weather conditions and mechanical stress, reducing maintenance needs over time.
  • Versatility: suitable for water supply, irrigation, and general industrial piping; can be used in both indoor and outdoor settings, subject to system design and local codes.
  • Installation approach: intended for straightforward assembly with standard MDPE pipe tools; no specialist equipment beyond typical pipework tooling is required.
Practical use tips
  1. Cut and deburr the 50mm MDPE pipe squarely before fitting.
  2. Clean the pipe ends to ensure a clean seating for the compression nut and olive.
  3. Do not exceed manufacturer torque recommendations when tightening the compression nut to avoid overtightening or joint damage.
  4. Ensure the BSPM thread is clean and aligned to avoid cross‑threading; tighten to the recommended specification.
For tradespeople needing a reliable method to bridge 50mm MDPE with BSP threads, this straight joiner offers a clear, practical solution that keeps line integrity and flow consistent across application scopes.

Description
MDPE Straight Joiner 50mm - 1.5" BSPM is a compression fitting that links a 50mm MDPE pipe to a 1.5" BSP male thread. Designed for plumbers, contractors and hands‑on trades, it provides a straightforward, straight connection for water supply, irrigation and industrial piping. This MDPE straight connector uses a compression mechanism to create a leak‑tight joint when installed following the manufacturer’s guidelines. The MDPE material offers good chemical resistance and durability, making it suitable for systems exposed to varying temperatures and outdoor conditions. The PN10 rating means the fitting is designed to withstand up to 10 bar of pressure, which aligns with many domestic and light commercial water systems. Key specifications and benefits
  • Pipe and thread compatibility: adapts from 50mm MDPE pipe to a 1.5" BSP male thread (BSPM), enabling straightforward size changes in line with typical UK pipework layouts.
  • Pressure rating: PN10 PE fittings rated for up to 10 bar, suitable for potable water and irrigation mains within normal residential and commercial installations.
  • Material and chemistry: MDPE offers good chemical resistance and mechanical strength while remaining flexible enough for thermal expansion and contraction in outdoor or exposed locations.
  • Sealing and joints: compression connections are designed to form leak‑free joints when installed correctly and with the appropriate seals and olives as specified for the product line.
  • Durability and lifecycle: MDPE fittings are known for long service life under varying weather conditions and mechanical stress, reducing maintenance needs over time.
  • Versatility: suitable for water supply, irrigation, and general industrial piping; can be used in both indoor and outdoor settings, subject to system design and local codes.
  • Installation approach: intended for straightforward assembly with standard MDPE pipe tools; no specialist equipment beyond typical pipework tooling is required.
Practical use tips
  1. Cut and deburr the 50mm MDPE pipe squarely before fitting.
  2. Clean the pipe ends to ensure a clean seating for the compression nut and olive.
  3. Do not exceed manufacturer torque recommendations when tightening the compression nut to avoid overtightening or joint damage.
  4. Ensure the BSPM thread is clean and aligned to avoid cross‑threading; tighten to the recommended specification.
For tradespeople needing a reliable method to bridge 50mm MDPE with BSP threads, this straight joiner offers a clear, practical solution that keeps line integrity and flow consistent across application scopes.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Have a question?

If you have any questions about our products or would like to learn more about our shipping options please feel free to contact one of our team today.

Contact Us
MDPE Straight Joiner 50mm - 1.5" BSPM - Armstrong Cheshire
Akor

MDPE Straight Joiner 50mm - 1.5" BSPM

£4.00
MDPE Straight Joiner 50mm - 1.5" BSPM is a compression fitting that links a 50mm MDPE pipe to a 1.5" BSP male thread. Designed for plumbers, contractors and hands‑on trades, it provides a straightforward, straight connection for water supply, irrigation and industrial piping. This MDPE straight connector uses a compression mechanism to create a leak‑tight joint when installed following the manufacturer’s guidelines. The MDPE material offers good chemical resistance and durability, making it suitable for systems exposed to varying temperatures and outdoor conditions. The PN10 rating means the fitting is designed to withstand up to 10 bar of pressure, which aligns with many domestic and light commercial water systems. Key specifications and benefits
  • Pipe and thread compatibility: adapts from 50mm MDPE pipe to a 1.5" BSP male thread (BSPM), enabling straightforward size changes in line with typical UK pipework layouts.
  • Pressure rating: PN10 PE fittings rated for up to 10 bar, suitable for potable water and irrigation mains within normal residential and commercial installations.
  • Material and chemistry: MDPE offers good chemical resistance and mechanical strength while remaining flexible enough for thermal expansion and contraction in outdoor or exposed locations.
  • Sealing and joints: compression connections are designed to form leak‑free joints when installed correctly and with the appropriate seals and olives as specified for the product line.
  • Durability and lifecycle: MDPE fittings are known for long service life under varying weather conditions and mechanical stress, reducing maintenance needs over time.
  • Versatility: suitable for water supply, irrigation, and general industrial piping; can be used in both indoor and outdoor settings, subject to system design and local codes.
  • Installation approach: intended for straightforward assembly with standard MDPE pipe tools; no specialist equipment beyond typical pipework tooling is required.
Practical use tips
  1. Cut and deburr the 50mm MDPE pipe squarely before fitting.
  2. Clean the pipe ends to ensure a clean seating for the compression nut and olive.
  3. Do not exceed manufacturer torque recommendations when tightening the compression nut to avoid overtightening or joint damage.
  4. Ensure the BSPM thread is clean and aligned to avoid cross‑threading; tighten to the recommended specification.
For tradespeople needing a reliable method to bridge 50mm MDPE with BSP threads, this straight joiner offers a clear, practical solution that keeps line integrity and flow consistent across application scopes.
View product