MDPE Straight Joiner 25mm is a compression fitting designed to connect MDPE pipes in domestic water supply and irrigation systems. It’s aimed at tradespeople and builders who need a reliable, straight connection with a straightforward install.
  • Pipe size: 25mm MDPE straight joiner for direct inline connections.
  • Pressure rating: PN10, up to 10 bar (approximately 1 MPa or 145 psi).
  • Material: MDPE, offering resistance to common chemicals and outdoor weathering.
  • Sealing method: Threaded compression connection that provides a tight seal when tightened to specification.
  • Applications: Suitable for water supply, garden irrigation, and light industrial piping where a straight, uninterrupted run is required.
Designed for practical, cost‑effective use, this straight joiner helps maintain continuous flow without introducing bends or tees. MDPE’s inherent flexibility and chemical resistance make it a sensible choice for pipes exposed to varying temperatures and outdoor conditions, reducing the risk of cracking or corrosion over time. Practical use scenarios include upgrading a mains water line to a new run, adding a straight branch in an irrigation loop, or linking sections of MDPE pipe in short, uncomplicated layouts. It’s compatible with standard 25mm MDPE pipe and PN10 system components, ensuring consistent pressure performance across typical residential and light commercial projects. Installation tips: cut the pipe square and cleanly, insert it fully into the joint until seated, then tighten the compression nut to manufacturer guidance. Check for leaks after system pressurisation and re-tighten gradually if needed. For longer or more complex projects, combine this joiner with other MDPE compression fittings (elbows, tees, reducers) to create secure, leak‑free pipework that stands up to daily use.
Akor
MDPE Pipe Fittings
MDPE Straight Joiner 25mm is a compression fitting designed to connect MDPE pipes in domestic water supply and irrigation systems. It’s aimed at tradespeople and builders who need a reliable, straight connection with a straightforward install.
  • Pipe size: 25mm MDPE straight joiner for direct inline connections.
  • Pressure rating: PN10, up to 10 bar (approximately 1 MPa or 145 psi).
  • Material: MDPE, offering resistance to common chemicals and outdoor weathering.
  • Sealing method: Threaded compression connection that provides a tight seal when tightened to specification.
  • Applications: Suitable for water supply, garden irrigation, and light industrial piping where a straight, uninterrupted run is required.
Designed for practical, cost‑effective use, this straight joiner helps maintain continuous flow without introducing bends or tees. MDPE’s inherent flexibility and chemical resistance make it a sensible choice for pipes exposed to varying temperatures and outdoor conditions, reducing the risk of cracking or corrosion over time. Practical use scenarios include upgrading a mains water line to a new run, adding a straight branch in an irrigation loop, or linking sections of MDPE pipe in short, uncomplicated layouts. It’s compatible with standard 25mm MDPE pipe and PN10 system components, ensuring consistent pressure performance across typical residential and light commercial projects. Installation tips: cut the pipe square and cleanly, insert it fully into the joint until seated, then tighten the compression nut to manufacturer guidance. Check for leaks after system pressurisation and re-tighten gradually if needed. For longer or more complex projects, combine this joiner with other MDPE compression fittings (elbows, tees, reducers) to create secure, leak‑free pipework that stands up to daily use.
Akor
MDPE Pipe Fittings
Ex VAT Inc VAT
Log in
CALL US ON
01625 322269
Basket
Call us on 01625 322269

MDPE Straight Joiner 25mm

£3.00

Delivery charges will vary depending on your location.

To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode

We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.

MDPE Straight Joiner 25mm is a compression fitting designed to connect MDPE pipes in domestic water supply and irrigation systems. It’s aimed at tradespeople and builders who need a reliable, straight connection with a straightforward install.
  • Pipe size: 25mm MDPE straight joiner for direct inline connections.
  • Pressure rating: PN10, up to 10 bar (approximately 1 MPa or 145 psi).
  • Material: MDPE, offering resistance to common chemicals and outdoor weathering.
  • Sealing method: Threaded compression connection that provides a tight seal when tightened to specification.
  • Applications: Suitable for water supply, garden irrigation, and light industrial piping where a straight, uninterrupted run is required.
Designed for practical, cost‑effective use, this straight joiner helps maintain continuous flow without introducing bends or tees. MDPE’s inherent flexibility and chemical resistance make it a sensible choice for pipes exposed to varying temperatures and outdoor conditions, reducing the risk of cracking or corrosion over time. Practical use scenarios include upgrading a mains water line to a new run, adding a straight branch in an irrigation loop, or linking sections of MDPE pipe in short, uncomplicated layouts. It’s compatible with standard 25mm MDPE pipe and PN10 system components, ensuring consistent pressure performance across typical residential and light commercial projects. Installation tips: cut the pipe square and cleanly, insert it fully into the joint until seated, then tighten the compression nut to manufacturer guidance. Check for leaks after system pressurisation and re-tighten gradually if needed. For longer or more complex projects, combine this joiner with other MDPE compression fittings (elbows, tees, reducers) to create secure, leak‑free pipework that stands up to daily use.

Description

MDPE Straight Joiner 25mm is a compression fitting designed to connect MDPE pipes in domestic water supply and irrigation systems. It’s aimed at tradespeople and builders who need a reliable, straight connection with a straightforward install.
  • Pipe size: 25mm MDPE straight joiner for direct inline connections.
  • Pressure rating: PN10, up to 10 bar (approximately 1 MPa or 145 psi).
  • Material: MDPE, offering resistance to common chemicals and outdoor weathering.
  • Sealing method: Threaded compression connection that provides a tight seal when tightened to specification.
  • Applications: Suitable for water supply, garden irrigation, and light industrial piping where a straight, uninterrupted run is required.
Designed for practical, cost‑effective use, this straight joiner helps maintain continuous flow without introducing bends or tees. MDPE’s inherent flexibility and chemical resistance make it a sensible choice for pipes exposed to varying temperatures and outdoor conditions, reducing the risk of cracking or corrosion over time. Practical use scenarios include upgrading a mains water line to a new run, adding a straight branch in an irrigation loop, or linking sections of MDPE pipe in short, uncomplicated layouts. It’s compatible with standard 25mm MDPE pipe and PN10 system components, ensuring consistent pressure performance across typical residential and light commercial projects. Installation tips: cut the pipe square and cleanly, insert it fully into the joint until seated, then tighten the compression nut to manufacturer guidance. Check for leaks after system pressurisation and re-tighten gradually if needed. For longer or more complex projects, combine this joiner with other MDPE compression fittings (elbows, tees, reducers) to create secure, leak‑free pipework that stands up to daily use.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Have a question?

If you have any questions about our products or would like to learn more about our shipping options please feel free to contact one of our team today.

MDPE Straight Joiner 25mm - Armstrong Cheshire
Akor

MDPE Straight Joiner 25mm

£3.00
MDPE Straight Joiner 25mm is a compression fitting designed to connect MDPE pipes in domestic water supply and irrigation systems. It’s aimed at tradespeople and builders who need a reliable, straight connection with a straightforward install.
  • Pipe size: 25mm MDPE straight joiner for direct inline connections.
  • Pressure rating: PN10, up to 10 bar (approximately 1 MPa or 145 psi).
  • Material: MDPE, offering resistance to common chemicals and outdoor weathering.
  • Sealing method: Threaded compression connection that provides a tight seal when tightened to specification.
  • Applications: Suitable for water supply, garden irrigation, and light industrial piping where a straight, uninterrupted run is required.
Designed for practical, cost‑effective use, this straight joiner helps maintain continuous flow without introducing bends or tees. MDPE’s inherent flexibility and chemical resistance make it a sensible choice for pipes exposed to varying temperatures and outdoor conditions, reducing the risk of cracking or corrosion over time. Practical use scenarios include upgrading a mains water line to a new run, adding a straight branch in an irrigation loop, or linking sections of MDPE pipe in short, uncomplicated layouts. It’s compatible with standard 25mm MDPE pipe and PN10 system components, ensuring consistent pressure performance across typical residential and light commercial projects. Installation tips: cut the pipe square and cleanly, insert it fully into the joint until seated, then tighten the compression nut to manufacturer guidance. Check for leaks after system pressurisation and re-tighten gradually if needed. For longer or more complex projects, combine this joiner with other MDPE compression fittings (elbows, tees, reducers) to create secure, leak‑free pipework that stands up to daily use.
View product