MDPE Straight Joiner 20mm - 1/2" BSPM
MDPE Straight Joiner 20mm - 1/2" BSPM is backordered and will ship as soon as it is back in stock.
Couldn't load collection availability
Delivery charges will vary depending on your location.
To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode
We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.
This MDPE Straight Joiner Compression Fitting adapts a 20mm MDPE pipe to a 1/2" BSP male thread, providing a straight, secure connection for water supply and irrigation systems. It’s tailored for PN10 MDPE piping, delivering reliable joints when installed to the manufacturer’s guidance.
Key specifications and benefits
- Pressure rating: PN10, up to 10 bar (approximately 1 MPa or 145 psi) for MDPE piping.
- Material and resistance: MDPE construction offers chemical and corrosion resistance, contributing to long service life in domestic and industrial environments.
- Connection type: straight compression method from 20mm MDPE to 1/2" BSP male thread, designed to create leak-free joints when properly installed.
- Durability: Robust against temperature variation and mechanical stress, suitable for outdoor and unprotected locations.
- Versatility: Appropriate for water supply, irrigation, gas distribution, and certain industrial piping applications within PN10 systems.
- Ease of installation: Recommends standard compression fitting practice; typically installs with basic hand tools and without specialist equipment.
Why it matters on site
For tradespeople and builders, a straight joiner that securely links 20mm MDPE to a 1/2" BSP thread simplifies run layouts and reduces joint points in tight spaces. The PN10 rating aligns with common domestic water and irrigation designs, helping you specify fittings that meet expected pressure conditions without over-specifying.
Practical use and tips
- Prepare pipe ends by cutting square and deburring to ensure a clean insertion.
- Slide the compression nut and olive onto the pipe, insert fully into the fitting, then tighten the nut firmly to seal the joint.
- Inspect for leaks after commissioning and re-tighten if necessary according to the torque guidelines provided by the manufacturer.
- Replace any damaged olives or nuts; do not reuse compressed components.
Keep a spare in your favourites kit for quick, reliable connections when you’re routing MDPE lines between 20mm pipes and 1/2" BSP threaded fittings.
Description
Description
This MDPE Straight Joiner Compression Fitting adapts a 20mm MDPE pipe to a 1/2" BSP male thread, providing a straight, secure connection for water supply and irrigation systems. It’s tailored for PN10 MDPE piping, delivering reliable joints when installed to the manufacturer’s guidance.
Key specifications and benefits
- Pressure rating: PN10, up to 10 bar (approximately 1 MPa or 145 psi) for MDPE piping.
- Material and resistance: MDPE construction offers chemical and corrosion resistance, contributing to long service life in domestic and industrial environments.
- Connection type: straight compression method from 20mm MDPE to 1/2" BSP male thread, designed to create leak-free joints when properly installed.
- Durability: Robust against temperature variation and mechanical stress, suitable for outdoor and unprotected locations.
- Versatility: Appropriate for water supply, irrigation, gas distribution, and certain industrial piping applications within PN10 systems.
- Ease of installation: Recommends standard compression fitting practice; typically installs with basic hand tools and without specialist equipment.
Why it matters on site
For tradespeople and builders, a straight joiner that securely links 20mm MDPE to a 1/2" BSP thread simplifies run layouts and reduces joint points in tight spaces. The PN10 rating aligns with common domestic water and irrigation designs, helping you specify fittings that meet expected pressure conditions without over-specifying.
Practical use and tips
- Prepare pipe ends by cutting square and deburring to ensure a clean insertion.
- Slide the compression nut and olive onto the pipe, insert fully into the fitting, then tighten the nut firmly to seal the joint.
- Inspect for leaks after commissioning and re-tighten if necessary according to the torque guidelines provided by the manufacturer.
- Replace any damaged olives or nuts; do not reuse compressed components.
Keep a spare in your favourites kit for quick, reliable connections when you’re routing MDPE lines between 20mm pipes and 1/2" BSP threaded fittings.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
