This MDPE Elbow 63mm is a compression 90-degree fitting for MDPE pipework, designed for tradespeople installing or repairing water, irrigation and industrial piping. It delivers a reliable directional change with a tight, leak-free seal when installed to the manufacturer’s guidance.

  • Connection: 63mm MDPE compression elbow (90°) for MDPE pipe ends
  • Pressure rating: PN10, up to 10 bar (about 1 MPa) when used with compatible pipe
  • Material: MDPE offering chemical resistance and durability in outdoor conditions
  • Joint integrity: Designed to create leak-free joints when properly seated and tightened per guidelines
  • Durability: Withstands temperature variations and mechanical stress typical of external installations
  • Versatility: Suitable for water supply, irrigation and light industrial piping
  • Installation: Compression fitting; easy to assemble with no specialist tools required

Use this elbow to route MDPE lines around obstacles or changes in direction where space is limited. Match with 63mm PN10 MDPE pipe and other PN10 compression fittings to build reliable runs. Before assembly, ensure pipe ends are cut square, clean and fully seated to achieve a proper seal; after installation, test the line at an appropriate pressure to verify leak integrity.

Packaged as part of the MDPE PN10 fittings range, this 63mm elbow combines chemical resistance, durability and cost-effectiveness for dependable water and irrigation networks.

Akor
MDPE Pipe Fittings

This MDPE Elbow 63mm is a compression 90-degree fitting for MDPE pipework, designed for tradespeople installing or repairing water, irrigation and industrial piping. It delivers a reliable directional change with a tight, leak-free seal when installed to the manufacturer’s guidance.

  • Connection: 63mm MDPE compression elbow (90°) for MDPE pipe ends
  • Pressure rating: PN10, up to 10 bar (about 1 MPa) when used with compatible pipe
  • Material: MDPE offering chemical resistance and durability in outdoor conditions
  • Joint integrity: Designed to create leak-free joints when properly seated and tightened per guidelines
  • Durability: Withstands temperature variations and mechanical stress typical of external installations
  • Versatility: Suitable for water supply, irrigation and light industrial piping
  • Installation: Compression fitting; easy to assemble with no specialist tools required

Use this elbow to route MDPE lines around obstacles or changes in direction where space is limited. Match with 63mm PN10 MDPE pipe and other PN10 compression fittings to build reliable runs. Before assembly, ensure pipe ends are cut square, clean and fully seated to achieve a proper seal; after installation, test the line at an appropriate pressure to verify leak integrity.

Packaged as part of the MDPE PN10 fittings range, this 63mm elbow combines chemical resistance, durability and cost-effectiveness for dependable water and irrigation networks.

Akor
MDPE Pipe Fittings
Ex VAT Inc VAT
Log in
CALL US ON
01625 322269
Basket
Call us on 01625 322269
£11.00

MDPE Elbow 63mm


We're here to help Monday to Friday 8:00 - 5:00

Live Chat or call us on 01625 322269

Delivery

Delivery charges will vary depending on your location.

To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode

We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.

Share information about this product with your customers.

This MDPE Elbow 63mm is a compression 90-degree fitting for MDPE pipework, designed for tradespeople installing or repairing water, irrigation and industrial piping. It delivers a reliable directional change with a tight, leak-free seal when installed to the manufacturer’s guidance.

  • Connection: 63mm MDPE compression elbow (90°) for MDPE pipe ends
  • Pressure rating: PN10, up to 10 bar (about 1 MPa) when used with compatible pipe
  • Material: MDPE offering chemical resistance and durability in outdoor conditions
  • Joint integrity: Designed to create leak-free joints when properly seated and tightened per guidelines
  • Durability: Withstands temperature variations and mechanical stress typical of external installations
  • Versatility: Suitable for water supply, irrigation and light industrial piping
  • Installation: Compression fitting; easy to assemble with no specialist tools required

Use this elbow to route MDPE lines around obstacles or changes in direction where space is limited. Match with 63mm PN10 MDPE pipe and other PN10 compression fittings to build reliable runs. Before assembly, ensure pipe ends are cut square, clean and fully seated to achieve a proper seal; after installation, test the line at an appropriate pressure to verify leak integrity.

Packaged as part of the MDPE PN10 fittings range, this 63mm elbow combines chemical resistance, durability and cost-effectiveness for dependable water and irrigation networks.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Have a question?

If you have any questions about our products or would like to learn more about our shipping options please feel free to contact one of our team today.

MDPE Elbow 63mm - Armstrong Cheshire
Akor

MDPE Elbow 63mm

£11.00

This MDPE Elbow 63mm is a compression 90-degree fitting for MDPE pipework, designed for tradespeople installing or repairing water, irrigation and industrial piping. It delivers a reliable directional change with a tight, leak-free seal when installed to the manufacturer’s guidance.

  • Connection: 63mm MDPE compression elbow (90°) for MDPE pipe ends
  • Pressure rating: PN10, up to 10 bar (about 1 MPa) when used with compatible pipe
  • Material: MDPE offering chemical resistance and durability in outdoor conditions
  • Joint integrity: Designed to create leak-free joints when properly seated and tightened per guidelines
  • Durability: Withstands temperature variations and mechanical stress typical of external installations
  • Versatility: Suitable for water supply, irrigation and light industrial piping
  • Installation: Compression fitting; easy to assemble with no specialist tools required

Use this elbow to route MDPE lines around obstacles or changes in direction where space is limited. Match with 63mm PN10 MDPE pipe and other PN10 compression fittings to build reliable runs. Before assembly, ensure pipe ends are cut square, clean and fully seated to achieve a proper seal; after installation, test the line at an appropriate pressure to verify leak integrity.

Packaged as part of the MDPE PN10 fittings range, this 63mm elbow combines chemical resistance, durability and cost-effectiveness for dependable water and irrigation networks.

View product