Extend and reposition your IBC outlet with this 3‑piece kit, designed for tradespeople working with IBC tanks in agriculture, water storage and similar tasks. It combines a S60x6 male‑to‑female extender, a BSPF end cap and a 32mm MDPE tee to deliver extra reach and flexible connections while keeping a secure, leak‑free fit.

What’s in the kit: IBC S60x6MF‑EXT extender, IBC S60X6 CAP1BSPF end cap, and MDPE Tee 32mm – 1" BSPM (MDPETEE32‑1BSPM).

IBC S60x6MF‑EXT extender features a male S60x6 thread on one end and a female S60x6 thread on the other, enabling extended reach or repositioning of your valve outlet. It is designed for compatibility with standard IBC valves and is manufactured in heavy‑duty plastic to resist impact and weathering.

IBC S60X6 CAP1BSPF end cap has a built‑in BSPF thread creating a secure seal and an easy connection point for plumbing and flow control components. The durable plastic construction helps prevent leaks and contamination in liquid handling systems.

MDPE Tee 32mm – 1" BSPM is a 32mm MDPE fitting with a 1" BSP male thread, intended for branching a line at 90 degrees. MDPE fittings are known for durability, flexibility and chemical resistance, with PN10 rating to withstand up to 10 bar (approximately 145 psi). The threaded compression connection helps achieve a tight, leak‑free seal without special tools, making on‑site installation straightforward for water supply and irrigation setups.

Ideal for farmers, haulage operators and DIY installers needing extra clearance in tight spaces, this kit extends valve outlets, improves access and enables additional components to be connected without replacing whole fittings. It helps maintain full flow capacity and keeps the system drip‑free under typical operating pressures.

Practical notes: keep threads clean and lightly lubricated where required; ensure MDPE is used within PN10 limits; check compatibility with any additives in the liquid. For installation, hand‑tighten and finish snugly, avoiding overtightening to prevent damage.

Akor
IBC Fittings

Extend and reposition your IBC outlet with this 3‑piece kit, designed for tradespeople working with IBC tanks in agriculture, water storage and similar tasks. It combines a S60x6 male‑to‑female extender, a BSPF end cap and a 32mm MDPE tee to deliver extra reach and flexible connections while keeping a secure, leak‑free fit.

What’s in the kit: IBC S60x6MF‑EXT extender, IBC S60X6 CAP1BSPF end cap, and MDPE Tee 32mm – 1" BSPM (MDPETEE32‑1BSPM).

IBC S60x6MF‑EXT extender features a male S60x6 thread on one end and a female S60x6 thread on the other, enabling extended reach or repositioning of your valve outlet. It is designed for compatibility with standard IBC valves and is manufactured in heavy‑duty plastic to resist impact and weathering.

IBC S60X6 CAP1BSPF end cap has a built‑in BSPF thread creating a secure seal and an easy connection point for plumbing and flow control components. The durable plastic construction helps prevent leaks and contamination in liquid handling systems.

MDPE Tee 32mm – 1" BSPM is a 32mm MDPE fitting with a 1" BSP male thread, intended for branching a line at 90 degrees. MDPE fittings are known for durability, flexibility and chemical resistance, with PN10 rating to withstand up to 10 bar (approximately 145 psi). The threaded compression connection helps achieve a tight, leak‑free seal without special tools, making on‑site installation straightforward for water supply and irrigation setups.

Ideal for farmers, haulage operators and DIY installers needing extra clearance in tight spaces, this kit extends valve outlets, improves access and enables additional components to be connected without replacing whole fittings. It helps maintain full flow capacity and keeps the system drip‑free under typical operating pressures.

Practical notes: keep threads clean and lightly lubricated where required; ensure MDPE is used within PN10 limits; check compatibility with any additives in the liquid. For installation, hand‑tighten and finish snugly, avoiding overtightening to prevent damage.

Akor
IBC Fittings
Ex VAT Inc VAT
CALL US ON
01625 322269
Call us on 01625 322269
Trustpilot
1 8
£8.00
Akor

IBC Extender with 2” S60X6 Cap and 32mm MDPE Tee
Trustpilot

We're here to help Monday to Friday 8:00 - 5:00

Live Chat or call us on 01625 322269

Delivery

Delivery charges will vary depending on your location.

To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode

We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.

Share information about this product with your customers.

Extend and reposition your IBC outlet with this 3‑piece kit, designed for tradespeople working with IBC tanks in agriculture, water storage and similar tasks. It combines a S60x6 male‑to‑female extender, a BSPF end cap and a 32mm MDPE tee to deliver extra reach and flexible connections while keeping a secure, leak‑free fit.

What’s in the kit: IBC S60x6MF‑EXT extender, IBC S60X6 CAP1BSPF end cap, and MDPE Tee 32mm – 1" BSPM (MDPETEE32‑1BSPM).

IBC S60x6MF‑EXT extender features a male S60x6 thread on one end and a female S60x6 thread on the other, enabling extended reach or repositioning of your valve outlet. It is designed for compatibility with standard IBC valves and is manufactured in heavy‑duty plastic to resist impact and weathering.

IBC S60X6 CAP1BSPF end cap has a built‑in BSPF thread creating a secure seal and an easy connection point for plumbing and flow control components. The durable plastic construction helps prevent leaks and contamination in liquid handling systems.

MDPE Tee 32mm – 1" BSPM is a 32mm MDPE fitting with a 1" BSP male thread, intended for branching a line at 90 degrees. MDPE fittings are known for durability, flexibility and chemical resistance, with PN10 rating to withstand up to 10 bar (approximately 145 psi). The threaded compression connection helps achieve a tight, leak‑free seal without special tools, making on‑site installation straightforward for water supply and irrigation setups.

Ideal for farmers, haulage operators and DIY installers needing extra clearance in tight spaces, this kit extends valve outlets, improves access and enables additional components to be connected without replacing whole fittings. It helps maintain full flow capacity and keeps the system drip‑free under typical operating pressures.

Practical notes: keep threads clean and lightly lubricated where required; ensure MDPE is used within PN10 limits; check compatibility with any additives in the liquid. For installation, hand‑tighten and finish snugly, avoiding overtightening to prevent damage.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Have a question?

If you have any questions about our products or would like to learn more about our shipping options please feel free to contact one of our team today.

Contact Us
IBC Extender with 2” S60X6 Cap and 32mm MDPE Tee - Armstrong Cheshire
Akor

IBC Extender with 2” S60X6 Cap and 32mm MDPE Tee

£8.00

Extend and reposition your IBC outlet with this 3‑piece kit, designed for tradespeople working with IBC tanks in agriculture, water storage and similar tasks. It combines a S60x6 male‑to‑female extender, a BSPF end cap and a 32mm MDPE tee to deliver extra reach and flexible connections while keeping a secure, leak‑free fit.

What’s in the kit: IBC S60x6MF‑EXT extender, IBC S60X6 CAP1BSPF end cap, and MDPE Tee 32mm – 1" BSPM (MDPETEE32‑1BSPM).

IBC S60x6MF‑EXT extender features a male S60x6 thread on one end and a female S60x6 thread on the other, enabling extended reach or repositioning of your valve outlet. It is designed for compatibility with standard IBC valves and is manufactured in heavy‑duty plastic to resist impact and weathering.

IBC S60X6 CAP1BSPF end cap has a built‑in BSPF thread creating a secure seal and an easy connection point for plumbing and flow control components. The durable plastic construction helps prevent leaks and contamination in liquid handling systems.

MDPE Tee 32mm – 1" BSPM is a 32mm MDPE fitting with a 1" BSP male thread, intended for branching a line at 90 degrees. MDPE fittings are known for durability, flexibility and chemical resistance, with PN10 rating to withstand up to 10 bar (approximately 145 psi). The threaded compression connection helps achieve a tight, leak‑free seal without special tools, making on‑site installation straightforward for water supply and irrigation setups.

Ideal for farmers, haulage operators and DIY installers needing extra clearance in tight spaces, this kit extends valve outlets, improves access and enables additional components to be connected without replacing whole fittings. It helps maintain full flow capacity and keeps the system drip‑free under typical operating pressures.

Practical notes: keep threads clean and lightly lubricated where required; ensure MDPE is used within PN10 limits; check compatibility with any additives in the liquid. For installation, hand‑tighten and finish snugly, avoiding overtightening to prevent damage.

View product