A practical two‑piece kit for IBC tanks that preserves container integrity while enabling safe venting during storage and transfer. Designed for tradespeople, storage operators and site managers, it pairs a vented 150mm blanking lid with a 50mm MDPE straight joiner to simplify conversions and maintain a secure, leak‑free connection.
  • Contents
  • 1 x Blanking Lid for IBC Tank 150mm with Built‑in Vent (IBCLIDCAP155MM)
  • 1 x MDPE Straight Joiner 50mm – 2" BSPM (MDPESTR50‑2BSPM)

150mm vented blanking lid is designed to maintain the integrity and functionality of IBC tanks. The built‑in vent prevents pressure buildup, allows controlled gas release and helps protect stored liquids from contamination or damage. Made from durable plastic, the lid is lightweight and easy to handle. It features a 6‑inch coarse thread (S160X7) to provide a secure, leak‑resistant seal during use. Availability of red, blue or black depends on stock. This vented blanking lid is a practical accessory for safe and efficient IBC tank operations, particularly when coordinating filling, storage and transfer of water and other compatible liquids.

MDPE Straight Joiner connects a 50mm MDPE pipe to a 2" BSP Male thread. It’s a straight compression fitting, designed for simple, reliable alignment in fluid transfer systems. The PN10 rating (up to 10 bar / 145 psi) indicates robust performance under typical site conditions, with good corrosion resistance and durability. MDPE fittings are commonly used in water supply, irrigation and industrial piping due to their secure compression connections that don’t require specialised tools. This joiner provides a straightforward pathway from 50mm pipework to equipment or accessories with a 2" BSPM connection.

Practical use and guidance—the kit suits scenarios where an IBC needs venting during storage, or where a 50mm MDPE supply line must be joined to a 2" BSPM component. It supports water and other compatible liquids, helping maintain internal conditions while enabling safe discharge when required. For best results, ensure the 150mm neck thread engages the S160X7 fit fully and that the MDPE joint is tightened per standard compression fitting practices.

Akor
IBC Fittings
A practical two‑piece kit for IBC tanks that preserves container integrity while enabling safe venting during storage and transfer. Designed for tradespeople, storage operators and site managers, it pairs a vented 150mm blanking lid with a 50mm MDPE straight joiner to simplify conversions and maintain a secure, leak‑free connection.
  • Contents
  • 1 x Blanking Lid for IBC Tank 150mm with Built‑in Vent (IBCLIDCAP155MM)
  • 1 x MDPE Straight Joiner 50mm – 2" BSPM (MDPESTR50‑2BSPM)

150mm vented blanking lid is designed to maintain the integrity and functionality of IBC tanks. The built‑in vent prevents pressure buildup, allows controlled gas release and helps protect stored liquids from contamination or damage. Made from durable plastic, the lid is lightweight and easy to handle. It features a 6‑inch coarse thread (S160X7) to provide a secure, leak‑resistant seal during use. Availability of red, blue or black depends on stock. This vented blanking lid is a practical accessory for safe and efficient IBC tank operations, particularly when coordinating filling, storage and transfer of water and other compatible liquids.

MDPE Straight Joiner connects a 50mm MDPE pipe to a 2" BSP Male thread. It’s a straight compression fitting, designed for simple, reliable alignment in fluid transfer systems. The PN10 rating (up to 10 bar / 145 psi) indicates robust performance under typical site conditions, with good corrosion resistance and durability. MDPE fittings are commonly used in water supply, irrigation and industrial piping due to their secure compression connections that don’t require specialised tools. This joiner provides a straightforward pathway from 50mm pipework to equipment or accessories with a 2" BSPM connection.

Practical use and guidance—the kit suits scenarios where an IBC needs venting during storage, or where a 50mm MDPE supply line must be joined to a 2" BSPM component. It supports water and other compatible liquids, helping maintain internal conditions while enabling safe discharge when required. For best results, ensure the 150mm neck thread engages the S160X7 fit fully and that the MDPE joint is tightened per standard compression fitting practices.

Akor
IBC Fittings
Ex VAT Inc VAT
CALL US ON
01625 322269
Call us on 01625 322269
Trustpilot
1 2
£7.62
Akor

IBC 6-inch Cap Kit with 50mm MDPE Straight
Trustpilot

We're here to help Monday to Friday 8:00 - 5:00

Live Chat or call us on 01625 322269

Delivery

Delivery charges will vary depending on your location.

To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode

We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.

Share information about this product with your customers.

A practical two‑piece kit for IBC tanks that preserves container integrity while enabling safe venting during storage and transfer. Designed for tradespeople, storage operators and site managers, it pairs a vented 150mm blanking lid with a 50mm MDPE straight joiner to simplify conversions and maintain a secure, leak‑free connection.
  • Contents
  • 1 x Blanking Lid for IBC Tank 150mm with Built‑in Vent (IBCLIDCAP155MM)
  • 1 x MDPE Straight Joiner 50mm – 2" BSPM (MDPESTR50‑2BSPM)

150mm vented blanking lid is designed to maintain the integrity and functionality of IBC tanks. The built‑in vent prevents pressure buildup, allows controlled gas release and helps protect stored liquids from contamination or damage. Made from durable plastic, the lid is lightweight and easy to handle. It features a 6‑inch coarse thread (S160X7) to provide a secure, leak‑resistant seal during use. Availability of red, blue or black depends on stock. This vented blanking lid is a practical accessory for safe and efficient IBC tank operations, particularly when coordinating filling, storage and transfer of water and other compatible liquids.

MDPE Straight Joiner connects a 50mm MDPE pipe to a 2" BSP Male thread. It’s a straight compression fitting, designed for simple, reliable alignment in fluid transfer systems. The PN10 rating (up to 10 bar / 145 psi) indicates robust performance under typical site conditions, with good corrosion resistance and durability. MDPE fittings are commonly used in water supply, irrigation and industrial piping due to their secure compression connections that don’t require specialised tools. This joiner provides a straightforward pathway from 50mm pipework to equipment or accessories with a 2" BSPM connection.

Practical use and guidance—the kit suits scenarios where an IBC needs venting during storage, or where a 50mm MDPE supply line must be joined to a 2" BSPM component. It supports water and other compatible liquids, helping maintain internal conditions while enabling safe discharge when required. For best results, ensure the 150mm neck thread engages the S160X7 fit fully and that the MDPE joint is tightened per standard compression fitting practices.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Have a question?

If you have any questions about our products or would like to learn more about our shipping options please feel free to contact one of our team today.

Contact Us
IBC 6-inch Cap Kit with 50mm MDPE Straight - Armstrong Cheshire
Akor

IBC 6-inch Cap Kit with 50mm MDPE Straight

£7.62
A practical two‑piece kit for IBC tanks that preserves container integrity while enabling safe venting during storage and transfer. Designed for tradespeople, storage operators and site managers, it pairs a vented 150mm blanking lid with a 50mm MDPE straight joiner to simplify conversions and maintain a secure, leak‑free connection.
  • Contents
  • 1 x Blanking Lid for IBC Tank 150mm with Built‑in Vent (IBCLIDCAP155MM)
  • 1 x MDPE Straight Joiner 50mm – 2" BSPM (MDPESTR50‑2BSPM)

150mm vented blanking lid is designed to maintain the integrity and functionality of IBC tanks. The built‑in vent prevents pressure buildup, allows controlled gas release and helps protect stored liquids from contamination or damage. Made from durable plastic, the lid is lightweight and easy to handle. It features a 6‑inch coarse thread (S160X7) to provide a secure, leak‑resistant seal during use. Availability of red, blue or black depends on stock. This vented blanking lid is a practical accessory for safe and efficient IBC tank operations, particularly when coordinating filling, storage and transfer of water and other compatible liquids.

MDPE Straight Joiner connects a 50mm MDPE pipe to a 2" BSP Male thread. It’s a straight compression fitting, designed for simple, reliable alignment in fluid transfer systems. The PN10 rating (up to 10 bar / 145 psi) indicates robust performance under typical site conditions, with good corrosion resistance and durability. MDPE fittings are commonly used in water supply, irrigation and industrial piping due to their secure compression connections that don’t require specialised tools. This joiner provides a straightforward pathway from 50mm pipework to equipment or accessories with a 2" BSPM connection.

Practical use and guidance—the kit suits scenarios where an IBC needs venting during storage, or where a 50mm MDPE supply line must be joined to a 2" BSPM component. It supports water and other compatible liquids, helping maintain internal conditions while enabling safe discharge when required. For best results, ensure the 150mm neck thread engages the S160X7 fit fully and that the MDPE joint is tightened per standard compression fitting practices.

View product