IBC 2” S60X6 Cap with Lever Valve and 32mm MDPE Tee
IBC 2” S60X6 Cap with Lever Valve and 32mm MDPE Tee is backordered and will ship as soon as it is back in stock.
Couldn't load collection availability
Delivery charges will vary depending on your location.
To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode
We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.
For tradespeople working with Intermediate Bulk Containers (IBC), this kit brings together a S60X6 end cap with a built‑in BSPF thread, a brass nickel‑plated lever valve and a 32mm MDPE tee to deliver a secure, easy‑to‑operate liquid connection for IBC systems.
- IBC S60X6 End Cap with BSPF thread — made from durable plastic, designed to seal IBC outlets and prevent leaks. The built‑in BSPF (female) thread provides a straightforward connection point for BSP fittings.
- Brass Nickel Plated Lever Valve — 1" BSP, M‑F configuration with a lever handle for smooth on/off control. Brass offers strength and corrosion resistance; nickel plating adds durability against wear and environmental factors.
- MDPE Tee 32mm – 1" BSPM — MDPE fitting with 32mm pipe connections and a 1" BSP male thread on the main run. MDPE fittings are known for durability, flexibility and chemical resistance, with threaded compression connections that help create a tight, leak‑free seal without specialist tools. The PN10 rating confirms suitability up to 10 bar (approximately 145 psi) for typical water and light chemical applications.
Why it matters on site
- Designed for IBC liquid handling, enabling secure sealing at the container and straightforward flow control downstream.
- Combines a robust end cap, reliable valve and a reliable tee to enable safe branch connections and controlled transfer of liquids.
- Threaded connections (BSP) allow interchange with common fittings, reducing the need for additional adapters.
Practical installation tips
- Clean all BSP threads before assembly and use PTFE thread tape to help seal BSP connections where appropriate.
- Hand‑tighten the end cap and valve, then give a small additional turn to seat the seal firmly without over‑tightening.
- Verify the MDPE run for free movement after fitting the 32mm tee, checking for any kinks or stress on the pipework.
IBC 2” S60X6 Cap with Lever Valve and 32mm MDPE Tee
Description
Description
For tradespeople working with Intermediate Bulk Containers (IBC), this kit brings together a S60X6 end cap with a built‑in BSPF thread, a brass nickel‑plated lever valve and a 32mm MDPE tee to deliver a secure, easy‑to‑operate liquid connection for IBC systems.
- IBC S60X6 End Cap with BSPF thread — made from durable plastic, designed to seal IBC outlets and prevent leaks. The built‑in BSPF (female) thread provides a straightforward connection point for BSP fittings.
- Brass Nickel Plated Lever Valve — 1" BSP, M‑F configuration with a lever handle for smooth on/off control. Brass offers strength and corrosion resistance; nickel plating adds durability against wear and environmental factors.
- MDPE Tee 32mm – 1" BSPM — MDPE fitting with 32mm pipe connections and a 1" BSP male thread on the main run. MDPE fittings are known for durability, flexibility and chemical resistance, with threaded compression connections that help create a tight, leak‑free seal without specialist tools. The PN10 rating confirms suitability up to 10 bar (approximately 145 psi) for typical water and light chemical applications.
Why it matters on site
- Designed for IBC liquid handling, enabling secure sealing at the container and straightforward flow control downstream.
- Combines a robust end cap, reliable valve and a reliable tee to enable safe branch connections and controlled transfer of liquids.
- Threaded connections (BSP) allow interchange with common fittings, reducing the need for additional adapters.
Practical installation tips
- Clean all BSP threads before assembly and use PTFE thread tape to help seal BSP connections where appropriate.
- Hand‑tighten the end cap and valve, then give a small additional turn to seat the seal firmly without over‑tightening.
- Verify the MDPE run for free movement after fitting the 32mm tee, checking for any kinks or stress on the pipework.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
