IBC 2” S60X6 Cap with Large Plastic Valve and MDPE Tee 32mm
IBC 2” S60X6 Cap with Large Plastic Valve and MDPE Tee 32mm is backordered and will ship as soon as it is back in stock.
Couldn't load collection availability
Delivery charges will vary depending on your location.
To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode
We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.
Essential three-piece kit for IBC liquid containment and flow control. It combines an IBC S60X6 end cap with built‑in BSPF thread, a full‑flow PP ball valve with a large lever, and a 32mm MDPE tee to create a ready-to-use branching point for your liquid line.
What’s in the box
- 1 x IBC S60X6 Cap with 1" BSP Thread (IBCS60X6CAP1BSPF)
- 1 x Full Flow Single Union Ball Valve PP BSPF – M (VALVE1BSPM-F-LARGE)
- 1 x MDPE Tee 32mm – 1" BSP (MDPETEE32-1BSPM)
Why it matters
- The S60X6 end cap provides a secure, leak‑ready seal for IBC outlets, with a built‑in BSPF thread to accept standard fittings, reducing contamination risks and downtime.
- The PP ball valve offers corrosion resistance and a robust, easy‑to‑operate lever handle. Its single union design simplifies installation and maintenance in restricted spaces.
- The MDPE tee enables a clean 90‑degree branch from a 32mm MDPE line, with threaded connections that deliver a tight, leak‑free seal under typical service pressures.
Technical highlights
- End cap: S60X6 with 1" BSPF connection for compatible fittings
- Valve: Full‑flow, PP material, BSPF – M thread, large ergonomic lever
- MDPE tee: 32mm inlet/outlet with 1" BSP threaded end, PN10 rated
- Maximum service pressure: MDPE fittings rated to 10 bar (≈145 psi)
Installation tips
Ensure threads are clean and use appropriate sealant or PTFE tape on BSP connections. Tighten connections firmly but avoid overtightening to prevent damage. Check for leaks after initial commissioning and run the system at the intended operating pressure.
IBC 2” S60X6 Cap with Large Plastic Valve and MDPE Tee 32mm
Description
Description
Essential three-piece kit for IBC liquid containment and flow control. It combines an IBC S60X6 end cap with built‑in BSPF thread, a full‑flow PP ball valve with a large lever, and a 32mm MDPE tee to create a ready-to-use branching point for your liquid line.
What’s in the box
- 1 x IBC S60X6 Cap with 1" BSP Thread (IBCS60X6CAP1BSPF)
- 1 x Full Flow Single Union Ball Valve PP BSPF – M (VALVE1BSPM-F-LARGE)
- 1 x MDPE Tee 32mm – 1" BSP (MDPETEE32-1BSPM)
Why it matters
- The S60X6 end cap provides a secure, leak‑ready seal for IBC outlets, with a built‑in BSPF thread to accept standard fittings, reducing contamination risks and downtime.
- The PP ball valve offers corrosion resistance and a robust, easy‑to‑operate lever handle. Its single union design simplifies installation and maintenance in restricted spaces.
- The MDPE tee enables a clean 90‑degree branch from a 32mm MDPE line, with threaded connections that deliver a tight, leak‑free seal under typical service pressures.
Technical highlights
- End cap: S60X6 with 1" BSPF connection for compatible fittings
- Valve: Full‑flow, PP material, BSPF – M thread, large ergonomic lever
- MDPE tee: 32mm inlet/outlet with 1" BSP threaded end, PN10 rated
- Maximum service pressure: MDPE fittings rated to 10 bar (≈145 psi)
Installation tips
Ensure threads are clean and use appropriate sealant or PTFE tape on BSP connections. Tighten connections firmly but avoid overtightening to prevent damage. Check for leaks after initial commissioning and run the system at the intended operating pressure.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
