Hose Connector WL with In-Line BSPF Valve and 20mm MDPE Straight is a practical, three‑piece kit for garden or irrigation setups. Designed for tradespeople, landscapers and serious DIYers, it delivers reliable connections and straightforward control of water flow.

  • 1 x Female Hose Connector – ¾” BSP (EXPAND34BSPM-FEM001WL)
  • 1 x In-Line Valve ¾” BSP Female Thread (HCV34BSPF001BLACK)
  • 1 x MDPE Straight 20mm – ¾” BSP (MDPESTR20-34BSPM)

The Female Hose Connector uses a standard ¾" BSP interface to connect with BSP‑threaded hoses and fittings. Its Click‑Lock Quick Connect mechanism enables quick attachment and detachment, helping to speed up job site setup and break‑down without compromising the seal when under pressure. The connector body is manufactured from robust plastic, built to withstand regular outdoor use and the temperature and weather changes typical of garden work.

The In‑Line Valve provides controlled flow directly in the hose line. It features a smooth, soft‑touch turn‑on/turn‑off action for precise regulation, and ¾” BSP female threads on both ends to fit common hose and pipe fittings. The compact, black plastic body includes a swivel‑head design, allowing the valve to be angled to suit different layouts without removing adapters or re‑fitting components. This makes it suitable for irrigation runs, site gardens, and temporary water supplies where adjustable flow is beneficial.

The MDPE Straight piece is 20mm MDPE with a ¾" BSP connection, enabling a simple bridge between 20mm MDPE piping and ¾" BSP fittings. This is useful for extending or routing water lines in plots, sheds or greenhouses where MDPE is already in use, reducing the need for additional adaptors and fittings.

Use cases include connecting a hose to a short irrigation run, adding a controllable valve inline for seasonal irrigation, and coupling MDPE main lines to hose systems on small sites. For best results, align threads and hand‑tighten firmly, then check for leaks at pressure. If using thread sealant, apply in accordance with manufacturer guidance and avoid over‑tightening, which can damage fittings.

Akor
MDPE Pipe Fittings

Hose Connector WL with In-Line BSPF Valve and 20mm MDPE Straight is a practical, three‑piece kit for garden or irrigation setups. Designed for tradespeople, landscapers and serious DIYers, it delivers reliable connections and straightforward control of water flow.

  • 1 x Female Hose Connector – ¾” BSP (EXPAND34BSPM-FEM001WL)
  • 1 x In-Line Valve ¾” BSP Female Thread (HCV34BSPF001BLACK)
  • 1 x MDPE Straight 20mm – ¾” BSP (MDPESTR20-34BSPM)

The Female Hose Connector uses a standard ¾" BSP interface to connect with BSP‑threaded hoses and fittings. Its Click‑Lock Quick Connect mechanism enables quick attachment and detachment, helping to speed up job site setup and break‑down without compromising the seal when under pressure. The connector body is manufactured from robust plastic, built to withstand regular outdoor use and the temperature and weather changes typical of garden work.

The In‑Line Valve provides controlled flow directly in the hose line. It features a smooth, soft‑touch turn‑on/turn‑off action for precise regulation, and ¾” BSP female threads on both ends to fit common hose and pipe fittings. The compact, black plastic body includes a swivel‑head design, allowing the valve to be angled to suit different layouts without removing adapters or re‑fitting components. This makes it suitable for irrigation runs, site gardens, and temporary water supplies where adjustable flow is beneficial.

The MDPE Straight piece is 20mm MDPE with a ¾" BSP connection, enabling a simple bridge between 20mm MDPE piping and ¾" BSP fittings. This is useful for extending or routing water lines in plots, sheds or greenhouses where MDPE is already in use, reducing the need for additional adaptors and fittings.

Use cases include connecting a hose to a short irrigation run, adding a controllable valve inline for seasonal irrigation, and coupling MDPE main lines to hose systems on small sites. For best results, align threads and hand‑tighten firmly, then check for leaks at pressure. If using thread sealant, apply in accordance with manufacturer guidance and avoid over‑tightening, which can damage fittings.

Akor
MDPE Pipe Fittings
Ex VAT Inc VAT
CALL US ON
01625 322269
Call us on 01625 322269
Trustpilot
1 15
Akor

Hose Connector WL with In-Line BSPF Valve and 20mm MDPE Straight

£4.00

Delivery charges will vary depending on your location.

To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode

We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.

Hose Connector WL with In-Line BSPF Valve and 20mm MDPE Straight is a practical, three‑piece kit for garden or irrigation setups. Designed for tradespeople, landscapers and serious DIYers, it delivers reliable connections and straightforward control of water flow.

  • 1 x Female Hose Connector – ¾” BSP (EXPAND34BSPM-FEM001WL)
  • 1 x In-Line Valve ¾” BSP Female Thread (HCV34BSPF001BLACK)
  • 1 x MDPE Straight 20mm – ¾” BSP (MDPESTR20-34BSPM)

The Female Hose Connector uses a standard ¾" BSP interface to connect with BSP‑threaded hoses and fittings. Its Click‑Lock Quick Connect mechanism enables quick attachment and detachment, helping to speed up job site setup and break‑down without compromising the seal when under pressure. The connector body is manufactured from robust plastic, built to withstand regular outdoor use and the temperature and weather changes typical of garden work.

The In‑Line Valve provides controlled flow directly in the hose line. It features a smooth, soft‑touch turn‑on/turn‑off action for precise regulation, and ¾” BSP female threads on both ends to fit common hose and pipe fittings. The compact, black plastic body includes a swivel‑head design, allowing the valve to be angled to suit different layouts without removing adapters or re‑fitting components. This makes it suitable for irrigation runs, site gardens, and temporary water supplies where adjustable flow is beneficial.

The MDPE Straight piece is 20mm MDPE with a ¾" BSP connection, enabling a simple bridge between 20mm MDPE piping and ¾" BSP fittings. This is useful for extending or routing water lines in plots, sheds or greenhouses where MDPE is already in use, reducing the need for additional adaptors and fittings.

Use cases include connecting a hose to a short irrigation run, adding a controllable valve inline for seasonal irrigation, and coupling MDPE main lines to hose systems on small sites. For best results, align threads and hand‑tighten firmly, then check for leaks at pressure. If using thread sealant, apply in accordance with manufacturer guidance and avoid over‑tightening, which can damage fittings.

Description

Hose Connector WL with In-Line BSPF Valve and 20mm MDPE Straight is a practical, three‑piece kit for garden or irrigation setups. Designed for tradespeople, landscapers and serious DIYers, it delivers reliable connections and straightforward control of water flow.

  • 1 x Female Hose Connector – ¾” BSP (EXPAND34BSPM-FEM001WL)
  • 1 x In-Line Valve ¾” BSP Female Thread (HCV34BSPF001BLACK)
  • 1 x MDPE Straight 20mm – ¾” BSP (MDPESTR20-34BSPM)

The Female Hose Connector uses a standard ¾" BSP interface to connect with BSP‑threaded hoses and fittings. Its Click‑Lock Quick Connect mechanism enables quick attachment and detachment, helping to speed up job site setup and break‑down without compromising the seal when under pressure. The connector body is manufactured from robust plastic, built to withstand regular outdoor use and the temperature and weather changes typical of garden work.

The In‑Line Valve provides controlled flow directly in the hose line. It features a smooth, soft‑touch turn‑on/turn‑off action for precise regulation, and ¾” BSP female threads on both ends to fit common hose and pipe fittings. The compact, black plastic body includes a swivel‑head design, allowing the valve to be angled to suit different layouts without removing adapters or re‑fitting components. This makes it suitable for irrigation runs, site gardens, and temporary water supplies where adjustable flow is beneficial.

The MDPE Straight piece is 20mm MDPE with a ¾" BSP connection, enabling a simple bridge between 20mm MDPE piping and ¾" BSP fittings. This is useful for extending or routing water lines in plots, sheds or greenhouses where MDPE is already in use, reducing the need for additional adaptors and fittings.

Use cases include connecting a hose to a short irrigation run, adding a controllable valve inline for seasonal irrigation, and coupling MDPE main lines to hose systems on small sites. For best results, align threads and hand‑tighten firmly, then check for leaks at pressure. If using thread sealant, apply in accordance with manufacturer guidance and avoid over‑tightening, which can damage fittings.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Have a question?

If you have any questions about our products or would like to learn more about our shipping options please feel free to contact one of our team today.

Contact Us
Hose Connector WL with In-Line BSPF Valve and 20mm MDPE Straight - Armstrong Cheshire
Akor

Hose Connector WL with In-Line BSPF Valve and 20mm MDPE Straight

£4.00

Hose Connector WL with In-Line BSPF Valve and 20mm MDPE Straight is a practical, three‑piece kit for garden or irrigation setups. Designed for tradespeople, landscapers and serious DIYers, it delivers reliable connections and straightforward control of water flow.

  • 1 x Female Hose Connector – ¾” BSP (EXPAND34BSPM-FEM001WL)
  • 1 x In-Line Valve ¾” BSP Female Thread (HCV34BSPF001BLACK)
  • 1 x MDPE Straight 20mm – ¾” BSP (MDPESTR20-34BSPM)

The Female Hose Connector uses a standard ¾" BSP interface to connect with BSP‑threaded hoses and fittings. Its Click‑Lock Quick Connect mechanism enables quick attachment and detachment, helping to speed up job site setup and break‑down without compromising the seal when under pressure. The connector body is manufactured from robust plastic, built to withstand regular outdoor use and the temperature and weather changes typical of garden work.

The In‑Line Valve provides controlled flow directly in the hose line. It features a smooth, soft‑touch turn‑on/turn‑off action for precise regulation, and ¾” BSP female threads on both ends to fit common hose and pipe fittings. The compact, black plastic body includes a swivel‑head design, allowing the valve to be angled to suit different layouts without removing adapters or re‑fitting components. This makes it suitable for irrigation runs, site gardens, and temporary water supplies where adjustable flow is beneficial.

The MDPE Straight piece is 20mm MDPE with a ¾" BSP connection, enabling a simple bridge between 20mm MDPE piping and ¾" BSP fittings. This is useful for extending or routing water lines in plots, sheds or greenhouses where MDPE is already in use, reducing the need for additional adaptors and fittings.

Use cases include connecting a hose to a short irrigation run, adding a controllable valve inline for seasonal irrigation, and coupling MDPE main lines to hose systems on small sites. For best results, align threads and hand‑tighten firmly, then check for leaks at pressure. If using thread sealant, apply in accordance with manufacturer guidance and avoid over‑tightening, which can damage fittings.

View product